[Tue Jan 17 04:46:59 2012] Detection parameters:
  Position = (325.0, 412.8) = 3 32 26.35 -27 40 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.0 +/- 22.6
  Background counts = 24.0
  Rate = 0.007 +/- 0.0005

[Tue Jan 17 04:47:00 2012] Off-axis axis estimate = 8.51'
[Tue Jan 17 06:44:11 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 06:44:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 06:44:11 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Tue Jan 17 06:44:11 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Tue Jan 17 06:44:11 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.69"
[Tue Jan 17 07:45:57 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 07:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 07:45:57 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 07:45:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 07:45:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 07:45:58 2012] Fit fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 07:46:18 2012] Warning, spatial fit 3 centroid is now closest to src. 15
[Tue Jan 17 07:46:18 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 17.229528 pixels away
[Tue Jan 17 07:46:18 2012] Source 7 is offset by 5.547943 and -0.690704 pixels which is larger than
2 X fitted extent = 1.439458 x 1.439458, not incorporating fit results
[Tue Jan 17 07:46:18 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:18 2012] Assessing source extent using major
[Tue Jan 17 07:46:18 2012] Source does appear to be extended
[Tue Jan 17 07:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:46:18 2012] Source is confused with source 3
[Tue Jan 17 09:48:16 2012] Using EEF radius (= 10.69 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:48:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 09:48:16 2012] Initial guess for spatial extent in simple fitting = 10.69"
[Tue Jan 17 09:48:16 2012] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.030
[Tue Jan 17 09:48:16 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.69"
[Tue Jan 17 11:54:26 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 11:54:26 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 11:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:54:27 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 11:54:27 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 11:54:27 2012] Fit fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 11:55:00 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.238178 pixels away
[Tue Jan 17 11:55:00 2012] Warning, spatial fit 3 centroid is now closest to src. 15
[Tue Jan 17 11:55:01 2012] Spatial fit model total counts = 103.624000, observed total counts = 810.000000
[Tue Jan 17 11:55:01 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jan 17 11:55:01 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:55:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:55:01 2012] Assessing source extent using major
[Tue Jan 17 11:55:01 2012] Source does appear to be extended
[Tue Jan 17 11:55:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:58:09 2012] XMMSAS src. selection expression = ellipse(28229.309021, 35867.270752, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 14:58:09 2012] Writing source region out to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7_src.reg
[Tue Jan 17 14:58:09 2012] Extracting stamp from image fullrun_mos2_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (288, 375) - (363, 450)
[Tue Jan 17 14:58:09 2012] XMMSAS bgd. selection expression = annulus(28229.309021, 35867.270752, 1087.500000, 2175.000000, X, Y) && !ellipse(28107.934357, 35308.373810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30961.084595, 37172.910614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28780.654000, 36635.522000, 1709.720049, 1709.720049, 0.000000, X, Y) && !ellipse(26145.078880, 37568.066400, 369.319211, 369.319211, 0.000000, X, Y) && !ellipse(28781.018799, 34850.455597, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 14:58:09 2012] Writing fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7.gif
[Tue Jan 17 15:01:12 2012] Mean detx,y = (4359.85, 7823.38) 
[Tue Jan 17 15:01:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 15:01:31 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 15:01:31 2012] Setting source spectrum file to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan 17 15:01:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jan 17 15:17:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jan 17 15:17:27 2012] rmf not generated due to insufficient counts
[Tue Jan 17 15:53:55 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:55 2012] Error reading totcts from fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue Jan 17 15:53:59 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:53:59 2012] Using photon index=1.80, rate=0.0065, arf fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7.arf
[Tue Jan 17 15:53:59 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:53:59 2012] Updating source flux to 1.2e-13
[Tue Jan 17 15:55:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jan 17 15:56:45 2012] xmm0108062301/analysis//spectral/fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete