[Tue Jan 17 04:46:59 2012] Detection parameters:
  Position = (374.0, 377.7) = 3 32 10.29 -27 43 9.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.4 +/- 11.3
  Background counts = 26.0
  Rate = 0.001 +/- 0.0002

[Tue Jan 17 04:47:00 2012] Off-axis axis estimate = 7.94'
[Tue Jan 17 06:44:11 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 06:44:11 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Jan 17 06:44:11 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.017
[Tue Jan 17 06:44:11 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.40"
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33.ximg exists
[Tue Jan 17 07:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33.csv
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33_1.ximg exists
[Tue Jan 17 07:45:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33.csv
[Tue Jan 17 07:45:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Tue Jan 17 07:45:58 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Tue Jan 17 07:45:58 2012] Fit fullrun_mos2_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Tue Jan 17 07:46:18 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 13.301741 pixels away
[Tue Jan 17 07:46:18 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:18 2012] Assessing source extent using major
[Tue Jan 17 07:46:18 2012] Source does appear to be extended
[Tue Jan 17 07:46:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 09:48:16 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:48:16 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Jan 17 09:48:16 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.017
[Tue Jan 17 09:48:16 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 10.40"
[Tue Jan 17 11:54:26 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33.ximg exists
[Tue Jan 17 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33.csv
[Tue Jan 17 11:54:26 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33_1.ximg exists
[Tue Jan 17 11:54:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33.csv
[Tue Jan 17 11:54:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 11:54:27 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Tue Jan 17 11:54:27 2012] fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Tue Jan 17 11:54:27 2012] Fit fullrun_mos2_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Tue Jan 17 11:55:00 2012] Spatial fit model total counts = 310.998000, observed total counts = 311.000000
[Tue Jan 17 11:55:00 2012] Offset between fit and detection position for source 23 = 0.321325 pixels
[Tue Jan 17 11:55:00 2012] 313.047000 total counts/ 272.562000 bgd. counts: snr = 2.452232
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.321325 pixels
  Position = (373.8, 377.6) = 3 32 10.38 -27 43 10.9
  Extent = 5.6 (2.6-9.2)", rotation angle = 0
  Source counts = 40.5 +/- 17.7
  Background counts = 272.6
  Rate = 0.0005 +/- 0.0002
[Tue Jan 17 11:55:01 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:55:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:55:01 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 11:55:01 2012] Source does appear to be extended
[Tue Jan 17 11:55:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:58:10 2012] XMMSAS src. selection expression = ellipse(32470.189060, 32799.069800, 335.313610, 335.313610, 0.000000, X, Y)
[Tue Jan 17 14:58:10 2012] Writing source region out to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23_src.reg
[Tue Jan 17 14:58:10 2012] Extracting stamp from image fullrun_mos2_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (355, 358) - (393, 397)
[Tue Jan 17 14:58:10 2012] XMMSAS bgd. selection expression = annulus(32470.189060, 32799.069800, 558.856016, 1117.712032, X, Y)
[Tue Jan 17 14:58:10 2012] Writing fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23.gif
[Tue Jan 17 15:09:46 2012] Mean detx,y = (-781.61, 7657.64) 
[Tue Jan 17 15:09:47 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 15:10:06 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 15:10:06 2012] Setting source spectrum file to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jan 17 15:10:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Tue Jan 17 15:50:55 2012] Not generating rmf since there are only 40 counts
[Tue Jan 17 15:50:55 2012] rmf not generated due to insufficient counts
[Tue Jan 17 15:53:57 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:57 2012] Error reading totcts from fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Tue Jan 17 15:54:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:54:00 2012] Using photon index=1.80, rate=0.000462, arf fullrun_mos2_xmm0108062301_pi300-10000_pass1_cl_src23.arf
[Tue Jan 17 15:54:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:54:00 2012] Updating source flux to 9.1e-15
[Tue Jan 17 15:55:43 2012] Source 23 has fewer than 100.000000 counts, skipping spectral fitting