[Tue Jan 17 04:46:58 2012] Detection parameters:
  Position = (190.4, 175.0) = 3 33 10.54 -27 57 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.8 +/- 11.7
  Background counts = 20.9
  Rate = 0.0007 +/- 0.0001

[Tue Jan 17 04:46:58 2012] Off-axis axis estimate = 11.90'
[Tue Jan 17 05:52:03 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 05:52:03 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Tue Jan 17 05:52:03 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Tue Jan 17 05:52:03 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 12.38"
[Tue Jan 17 06:44:10 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45.ximg exists
[Tue Jan 17 06:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45.csv
[Tue Jan 17 06:44:10 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Jan 17 06:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45.csv
[Tue Jan 17 06:44:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 06:44:11 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Jan 17 06:44:11 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Jan 17 06:44:11 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Tue Jan 17 07:46:12 2012] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 15.099169 pixels away
[Tue Jan 17 07:46:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:12 2012] Assessing source extent using major
[Tue Jan 17 07:46:12 2012] Source does appear to be extended
[Tue Jan 17 07:46:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 09:01:16 2012] Using EEF radius (= 12.38 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:01:16 2012] Initial guess for spatial extent in simple fitting = 12.38"
[Tue Jan 17 09:01:16 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.938
[Tue Jan 17 09:01:16 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 12.38"
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src44.ximg exists
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src44_1.ximg exists
[Tue Jan 17 09:48:15 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src44 appears to have run properly
[Tue Jan 17 09:48:16 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Tue Jan 17 09:48:16 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Tue Jan 17 09:48:16 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Tue Jan 17 11:54:50 2012] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 14.518081 pixels away
[Tue Jan 17 11:54:50 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:54:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:54:50 2012] Assessing source extent using major
[Tue Jan 17 11:54:50 2012] Source does appear to be extended
[Tue Jan 17 11:54:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:13:46 2012] XMMSAS src. selection expression = ellipse(16513.676300, 15172.918365, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 14:13:46 2012] Writing source region out to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28_src.reg
[Tue Jan 17 14:13:46 2012] Extracting stamp from image fullrun_mos1_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (153, 137) - (228, 212)
[Tue Jan 17 14:13:46 2012] XMMSAS bgd. selection expression = annulus(16513.676300, 15172.918365, 1087.500000, 2175.000000, X, Y) && !ellipse(18878.106003, 14570.830734, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 14:13:46 2012] Writing fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28.gif
[Tue Jan 17 14:30:00 2012] Mean detx,y = (-15479.69, -3819.45) 
[Tue Jan 17 14:30:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 14:30:19 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 14:30:20 2012] Setting source spectrum file to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jan 17 14:30:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jan 17 14:57:45 2012] Not generating rmf since there are only 58 counts
[Tue Jan 17 14:57:45 2012] rmf not generated due to insufficient counts
[Tue Jan 17 15:53:53 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:53 2012] Error reading totcts from fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jan 17 15:53:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:53:55 2012] Using photon index=1.80, rate=0.00067, arf fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src28.arf
[Tue Jan 17 15:53:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:53:55 2012] Updating source flux to 1.8e-14
[Tue Jan 17 15:54:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting