[Tue Jan 17 04:46:57 2012] Detection parameters:
  Position = (372.8, 364.3) = 3 32 10.70 -27 44 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 14.0
  Background counts = 23.2
  Rate = 0.002 +/- 0.0003

[Tue Jan 17 04:46:58 2012] Off-axis axis estimate = 7.20'
[Tue Jan 17 05:52:03 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 05:52:03 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Jan 17 05:52:03 2012] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.508
[Tue Jan 17 05:52:03 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 10.03"
[Tue Jan 17 06:44:10 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jan 17 06:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10.csv
[Tue Jan 17 06:44:10 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jan 17 06:44:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10.csv
[Tue Jan 17 06:44:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 06:44:11 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jan 17 06:44:11 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jan 17 06:44:11 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Jan 17 07:46:12 2012] Source 17 is offset by -0.208526 and 1.373692 pixels which is larger than
2 X fitted extent = 1.339315 x 1.339315, not incorporating fit results
[Tue Jan 17 07:46:12 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 07:46:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 07:46:12 2012] Assessing source extent using major
[Tue Jan 17 07:46:12 2012] Source does appear to be extended
[Tue Jan 17 07:46:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 09:01:16 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 09:01:16 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Tue Jan 17 09:01:16 2012] source mask rpix=2.3, npix_max = 31, mask sum = 16, frac = 0.508
[Tue Jan 17 09:01:16 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.03"
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src9.ximg exists
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Jan 17 09:48:15 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_src9 appears to have run properly
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Jan 17 09:48:15 2012] fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Jan 17 09:48:15 2012] Fit fullrun_mos1_xmm0108062301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Tue Jan 17 11:54:50 2012] Source 17 is offset by -0.211048 and 1.378405 pixels which is larger than
2 X fitted extent = 1.328984 x 1.328984, not incorporating fit results
[Tue Jan 17 11:54:50 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 11:54:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 11:54:50 2012] Assessing source extent using major
[Tue Jan 17 11:54:50 2012] Source does appear to be extended
[Tue Jan 17 11:54:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 14:13:45 2012] XMMSAS src. selection expression = ellipse(32383.423615, 31646.278625, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jan 17 14:13:45 2012] Writing source region out to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17_src.reg
[Tue Jan 17 14:13:45 2012] Extracting stamp from image fullrun_mos1_xmm0108062301_pi300-10000_cl_sm2.00.img.gz, (335, 327) - (410, 402)
[Tue Jan 17 14:13:45 2012] XMMSAS bgd. selection expression = annulus(32383.423615, 31646.278625, 1087.500000, 2175.000000, X, Y) && !ellipse(34603.121033, 29344.105377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35141.237061, 32569.660645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32475.550476, 32819.668823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30696.256200, 32871.548000, 545.852816, 545.852816, 0.000000, X, Y) && !ellipse(31585.950000, 33295.784800, 729.032821, 729.032821, 0.000000, X, Y)
[Tue Jan 17 14:13:45 2012] Writing fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17.gif
[Tue Jan 17 14:17:36 2012] Mean detx,y = (6850.97, 1212.18) 
[Tue Jan 17 14:17:37 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 14:18:04 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 14:18:04 2012] Setting source spectrum file to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan 17 14:18:04 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue Jan 17 14:42:43 2012] Not generating rmf since there are only 97 counts
[Tue Jan 17 14:42:43 2012] rmf not generated due to insufficient counts
[Tue Jan 17 15:53:50 2012] Updating aperture counts using extracted products
[Tue Jan 17 15:53:50 2012] Error reading totcts from fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue Jan 17 15:53:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 15:53:54 2012] Using photon index=1.80, rate=0.00221, arf fullrun_mos1_xmm0108062301_pi300-10000_pass1_cl_src17.arf
[Tue Jan 17 15:53:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 15:53:54 2012] Updating source flux to 4e-14
[Tue Jan 17 15:54:03 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting