[Mon Jan 16 17:33:07 2012] Detection parameters: Position = (136.8, 413.0) = 3 33 29.08 -27 40 39.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 97.2 +/- 14.9 Background counts = 43.9 Rate = 0.002 +/- 0.0003 [Mon Jan 16 17:33:09 2012] Off-axis axis estimate = 14.36' [Mon Jan 16 17:34:59 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting [Mon Jan 16 17:34:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jan 16 17:34:59 2012] Initial guess for spatial extent in simple fitting = 13.61" [Mon Jan 16 17:34:59 2012] source mask rpix=3.1, npix_max = 52, mask sum = 23, frac = 0.437 [Mon Jan 16 17:34:59 2012] Skipping simple spatial due to low active detector fraction [Mon Jan 16 18:29:25 2012] Vigneting correction estimate = 1.000000 [Mon Jan 16 18:29:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 16 18:29:25 2012] Assessing source extent using major [Mon Jan 16 18:29:25 2012] Source does appear to be extended [Mon Jan 16 18:29:25 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 16 18:29:33 2012] Using EEF radius (= 13.61 ")to estimate initial spatial extent for simple fitting [Mon Jan 16 18:29:33 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Jan 16 18:29:33 2012] Initial guess for spatial extent in simple fitting = 13.61" [Mon Jan 16 18:29:33 2012] source mask rpix=3.1, npix_max = 52, mask sum = 23, frac = 0.437 [Mon Jan 16 18:29:33 2012] Skipping simple spatial due to low active detector fraction [Mon Jan 16 19:27:52 2012] Source 4 is offset by -8.233665 and -3.975152 pixels which is larger than 2 X fitted extent = 2.626929 x 2.626929, not incorporating fit results [Mon Jan 16 19:27:52 2012] Vigneting correction estimate = 1.000000 [Mon Jan 16 19:27:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Jan 16 19:27:52 2012] Assessing source extent using major [Mon Jan 16 19:27:52 2012] Source does appear to be extended [Mon Jan 16 19:27:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Jan 16 19:28:00 2012] XMMSAS src. selection expression = ellipse(11853.963150, 35883.317749, 652.500000, 652.500000, 0.000000, X, Y) [Mon Jan 16 19:28:00 2012] Writing source region out to fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4_src.reg [Mon Jan 16 19:28:00 2012] Extracting stamp from image fullrun_pn_xmm0108062101_pi300-10000_cl_sm2.00.img.gz, (99, 376) - (174, 451) [Mon Jan 16 19:28:00 2012] XMMSAS bgd. selection expression = annulus(11853.963150, 35883.317749, 1087.500000, 2175.000000, X, Y) && !ellipse(14060.152400, 38022.004600, 1828.344053, 1828.344053, 0.000000, X, Y) [Mon Jan 16 19:28:00 2012] Writing fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4.gif [Mon Jan 16 19:30:05 2012] Mean detx,y = (-18023.51, 182.04) [Mon Jan 16 19:30:07 2012] Setting backscal keywords in source and bgd. spectrum [Mon Jan 16 19:30:25 2012] Binned source spectrum to 10 counts/bin [Mon Jan 16 19:30:26 2012] Setting source spectrum file to fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jan 16 19:30:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4_bgd.pi.gz [Mon Jan 16 19:55:23 2012] Not generating rmf since there are only 97 counts [Mon Jan 16 19:55:23 2012] rmf not generated due to insufficient counts [Mon Jan 16 20:17:48 2012] Updating aperture counts using extracted products [Mon Jan 16 20:17:48 2012] Error reading totcts from fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Mon Jan 16 20:17:49 2012] Calculating source flux in energy range 0.30-8.00 [Mon Jan 16 20:17:49 2012] Using photon index=1.80, rate=0.00173, arf fullrun_pn_xmm0108062101_pi300-10000_pass1_cl_src4.arf [Mon Jan 16 20:17:49 2012] Assuming count rate is from the 0.30-10.00 bandpass [Mon Jan 16 20:17:49 2012] Updating source flux to 2.1e-14 [Mon Jan 16 20:17:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting