[Mon Jan 16 17:38:57 2012] Detection parameters:
  Position = (444.0, 237.3) = 3 31 47.08 -27 53 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.0 +/- 16.1
  Background counts = 73.1
  Rate = 0.002 +/- 0.0003

[Mon Jan 16 17:38:57 2012] Off-axis axis estimate = 11.44'
[Mon Jan 16 17:41:10 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 17:41:10 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jan 16 17:41:10 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jan 16 17:41:10 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 12.15"
[Mon Jan 16 18:23:04 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jan 16 18:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33.csv
[Mon Jan 16 18:23:04 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jan 16 18:23:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33.csv
[Mon Jan 16 18:23:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 18:23:04 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jan 16 18:23:04 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jan 16 18:23:04 2012] Fit fullrun_pn_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Jan 16 18:55:42 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 14.302379 pixels away
[Mon Jan 16 18:55:42 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 18:55:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 18:55:42 2012] Assessing source extent using major
[Mon Jan 16 18:55:42 2012] Source does appear to be extended
[Mon Jan 16 18:55:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 18:55:56 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 18:55:56 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jan 16 18:55:56 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jan 16 18:55:56 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 12.15"
[Mon Jan 16 19:43:17 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jan 16 19:43:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33.csv
[Mon Jan 16 19:43:17 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jan 16 19:43:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33.csv
[Mon Jan 16 19:43:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 19:43:18 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jan 16 19:43:18 2012] fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jan 16 19:43:18 2012] Fit fullrun_pn_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Jan 16 20:17:12 2012] Source 33 is offset by 5.555024 and 4.745879 pixels which is larger than
2 X fitted extent = 1.449766 x 1.449766, not incorporating fit results
[Mon Jan 16 20:17:12 2012] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 15.021135 pixels away
[Mon Jan 16 20:17:12 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 20:17:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 20:17:12 2012] Assessing source extent using major
[Mon Jan 16 20:17:12 2012] Source does appear to be extended
[Mon Jan 16 20:17:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 20:17:23 2012] XMMSAS src. selection expression = ellipse(38575.751099, 20600.427490, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan 16 20:17:23 2012] Writing source region out to fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33_src.reg
[Mon Jan 16 20:17:23 2012] Extracting stamp from image fullrun_pn_xmm0108061901_pi300-10000_cl_sm2.00.img.gz, (406, 200) - (481, 275)
[Mon Jan 16 20:17:23 2012] XMMSAS bgd. selection expression = annulus(38575.751099, 20600.427490, 1087.500000, 2175.000000, X, Y) && !ellipse(39120.756927, 19139.005112, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jan 16 20:17:23 2012] Writing fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33.gif
[Mon Jan 16 20:35:32 2012] Mean detx,y = (12488.07, -495.23) 
[Mon Jan 16 20:35:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 16 20:35:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 16 20:35:48 2012] Setting source spectrum file to fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Jan 16 20:35:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon Jan 16 20:55:24 2012] Not generating rmf since there are only 89 counts
[Mon Jan 16 20:55:24 2012] rmf not generated due to insufficient counts
[Mon Jan 16 21:17:00 2012] Updating aperture counts using extracted products
[Mon Jan 16 21:17:00 2012] Error reading totcts from fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon Jan 16 21:17:00 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 16 21:17:00 2012] Using photon index=1.80, rate=0.00195, arf fullrun_pn_xmm0108061901_pi300-10000_pass1_cl_src33.arf
[Mon Jan 16 21:17:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan 16 21:17:00 2012] Updating source flux to 9.4e-15
[Mon Jan 16 21:17:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting