[Mon Jan 16 17:38:59 2012] Detection parameters:
  Position = (216.3, 167.3) = 3 33 1.81 -27 58 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.5 +/- 18.5
  Background counts = 67.9
  Rate = 0.003 +/- 0.0004

[Mon Jan 16 17:38:59 2012] Off-axis axis estimate = 11.22'
[Mon Jan 16 18:38:45 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 18:38:45 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Mon Jan 16 18:38:45 2012] source mask rpix=2.8, npix_max = 42, mask sum = 48, frac = 1.124
[Mon Jan 16 18:38:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.04"
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10.ximg exists
[Mon Jan 16 18:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10.csv
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10_1.ximg exists
[Mon Jan 16 18:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10.csv
[Mon Jan 16 18:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Mon Jan 16 18:55:35 2012] Fit fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Mon Jan 16 18:55:47 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 14.281554 pixels away
[Mon Jan 16 18:55:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 18:55:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 18:55:48 2012] Assessing source extent using major
[Mon Jan 16 18:55:48 2012] Source does appear to be extended
[Mon Jan 16 18:55:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 20:00:13 2012] Using EEF radius (= 12.04 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 20:00:13 2012] Initial guess for spatial extent in simple fitting = 12.04"
[Mon Jan 16 20:00:13 2012] source mask rpix=2.8, npix_max = 42, mask sum = 48, frac = 1.124
[Mon Jan 16 20:00:13 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 12.04"
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src10.ximg exists
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Jan 16 20:17:07 2012] Fit fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src10 appears to have run properly
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Jan 16 20:17:07 2012] Fit fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Mon Jan 16 20:17:16 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.028831 pixels away
[Mon Jan 16 20:17:16 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 20:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 20:17:16 2012] Assessing source extent using major
[Mon Jan 16 20:17:16 2012] Source does appear to be extended
[Mon Jan 16 20:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 21:08:43 2012] XMMSAS src. selection expression = ellipse(18765.388062, 14506.944092, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jan 16 21:08:43 2012] Writing source region out to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3_src.reg
[Mon Jan 16 21:08:43 2012] Extracting stamp from image fullrun_mos2_xmm0108061901_pi300-10000_cl_sm2.00.img.gz, (179, 130) - (254, 205)
[Mon Jan 16 21:08:43 2012] XMMSAS bgd. selection expression = annulus(18765.388062, 14506.944092, 1087.500000, 2175.000000, X, Y)
[Mon Jan 16 21:08:43 2012] Writing fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3.gif
[Mon Jan 16 21:10:40 2012] Mean detx,y = (1303.48, -15106.11) 
[Mon Jan 16 21:10:41 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 16 21:11:06 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 16 21:11:06 2012] Setting source spectrum file to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jan 16 21:11:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jan 16 21:15:46 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan 16 21:15:46 2012] rmf not generated due to insufficient counts
[Mon Jan 16 21:17:01 2012] Updating aperture counts using extracted products
[Mon Jan 16 21:17:01 2012] Error reading totcts from fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jan 16 21:17:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 16 21:17:01 2012] Using photon index=1.80, rate=0.0027, arf fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src3.arf
[Mon Jan 16 21:17:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan 16 21:17:01 2012] Updating source flux to 6.1e-14
[Mon Jan 16 21:17:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting