[Mon Jan 16 17:38:59 2012] Detection parameters:
  Position = (286.7, 185.5) = 3 32 38.69 -27 57 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.6 +/- 16.5
  Background counts = 83.0
  Rate = 0.003 +/- 0.0005

[Mon Jan 16 17:38:59 2012] Off-axis axis estimate = 8.23'
[Mon Jan 16 18:38:45 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 18:38:45 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Mon Jan 16 18:38:45 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.877
[Mon Jan 16 18:38:45 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.55"
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11.ximg exists
[Mon Jan 16 18:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11.csv
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Jan 16 18:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11.csv
[Mon Jan 16 18:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Jan 16 18:55:35 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Jan 16 18:55:35 2012] Fit fullrun_mos2_xmm0108061901_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Jan 16 18:55:47 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 13.646108 pixels away
[Mon Jan 16 18:55:48 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 18:55:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 18:55:48 2012] Assessing source extent using major
[Mon Jan 16 18:55:48 2012] Source does appear to be extended
[Mon Jan 16 18:55:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 20:00:13 2012] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Mon Jan 16 20:00:13 2012] Initial guess for spatial extent in simple fitting = 10.55"
[Mon Jan 16 20:00:13 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.877
[Mon Jan 16 20:00:13 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 10.55"
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11.ximg exists
[Mon Jan 16 20:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11.csv
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Jan 16 20:17:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11.csv
[Mon Jan 16 20:17:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Jan 16 20:17:07 2012] fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Jan 16 20:17:07 2012] Fit fullrun_mos2_xmm0108061901_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Jan 16 20:17:16 2012] Spatial fit model total counts = 155.000000, observed total counts = 155.000000
[Mon Jan 16 20:17:16 2012] Offset between fit and detection position for source 12 = 0.206469 pixels
[Mon Jan 16 20:17:16 2012] 153.172100 total counts/ 106.062000 bgd. counts: snr = 4.574400
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.206469 pixels
  Position = (286.8, 185.3) = 3 32 38.66 -27 57 2.3
  Extent = 4.9 (3.7-6.3)", rotation angle = 0
  Source counts = 47.1 +/- 12.4
  Background counts = 106.1
  Rate = 0.001 +/- 0.0003
[Mon Jan 16 20:17:16 2012] Vigneting correction estimate = 1.000000
[Mon Jan 16 20:17:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jan 16 20:17:16 2012] Assessing source extent using major axis lower bound
[Mon Jan 16 20:17:16 2012] Source does appear to be extended
[Mon Jan 16 20:17:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan 16 21:08:43 2012] XMMSAS src. selection expression = ellipse(24901.542600, 16072.300200, 296.922009, 296.922009, 0.000000, X, Y)
[Mon Jan 16 21:08:43 2012] Writing source region out to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12_src.reg
[Mon Jan 16 21:08:43 2012] Extracting stamp from image fullrun_mos2_xmm0108061901_pi300-10000_cl_sm2.00.img.gz, (270, 168) - (304, 202)
[Mon Jan 16 21:08:43 2012] XMMSAS bgd. selection expression = annulus(24901.542600, 16072.300200, 494.870014, 989.740028, X, Y)
[Mon Jan 16 21:08:43 2012] Writing fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12.gif
[Mon Jan 16 21:11:09 2012] Mean detx,y = (-3096.78, -10544.14) 
[Mon Jan 16 21:11:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan 16 21:11:17 2012] Binned source spectrum to 10 counts/bin
[Mon Jan 16 21:11:17 2012] Setting source spectrum file to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jan 16 21:11:17 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jan 16 21:15:49 2012] Not generating rmf since there are only 47 counts
[Mon Jan 16 21:15:49 2012] rmf not generated due to insufficient counts
[Mon Jan 16 21:17:01 2012] Updating aperture counts using extracted products
[Mon Jan 16 21:17:01 2012] Error reading totcts from fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jan 16 21:17:01 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jan 16 21:17:01 2012] Using photon index=1.80, rate=0.00109, arf fullrun_mos2_xmm0108061901_pi300-10000_pass1_cl_src12.arf
[Mon Jan 16 21:17:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jan 16 21:17:01 2012] Updating source flux to 2.5e-14
[Mon Jan 16 21:17:15 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting