[Wed Jan 18 00:08:13 2012] Detection parameters:
  Position = (322.4, 409.9) = 3 32 26.86 -27 41 5.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1660.4 +/- 51.0
  Background counts = 98.2
  Rate = 0.03 +/- 0.0009

[Wed Jan 18 00:08:14 2012] Off-axis axis estimate = 8.26'
[Wed Jan 18 00:10:05 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 00:10:05 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Wed Jan 18 00:10:05 2012] source mask rpix=2.4, npix_max = 34, mask sum = 34, frac = 0.992
[Wed Jan 18 00:10:05 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.56"
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jan 18 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3.csv
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jan 18 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3.csv
[Wed Jan 18 00:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan 18 00:54:21 2012] Fit fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan 18 02:16:22 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.270157 pixels away
[Wed Jan 18 02:16:22 2012] Spatial fit model total counts = 1130.790000, observed total counts = 1130.000000
[Wed Jan 18 02:16:22 2012] Offset between fit and detection position for source 3 = 0.548476 pixels
[Wed Jan 18 02:16:22 2012] Warning, changing simple spatial fit ID from 3 to 13
[Wed Jan 18 02:16:22 2012] 1117.827000 total counts/ 777.780000 bgd. counts: snr = 12.193000
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.548476 pixels
  Position = (322.9, 410.0) = 3 32 26.68 -27 41 6.4
  Extent = 3.7 (3.3-4.1)", rotation angle = 0
  Source counts = 340.0 +/- 33.4
  Background counts = 777.8
  Rate = 0.007 +/- 0.0007
[Wed Jan 18 02:16:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:16:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:16:22 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 02:16:22 2012] Source does appear to be extended
[Wed Jan 18 02:16:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 02:16:22 2012] Source is confused with source 4
[Wed Jan 18 02:16:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 02:16:39 2012] Initial guess for spatial extent in simple fitting = 3.73"
[Wed Jan 18 02:16:39 2012] source mask rpix=0.9, npix_max = 7, mask sum = 4, frac = 0.542
[Wed Jan 18 02:16:39 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.73"
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jan 18 03:02:36 2012] Fit fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src3 appears to have run properly
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jan 18 03:02:36 2012] Fit fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jan 18 04:15:30 2012] Spatial fit model total counts = 2507.760000, observed total counts = 2514.000000
[Wed Jan 18 04:15:30 2012] Offset between fit and detection position for source 3 = 0.815909 pixels
[Wed Jan 18 04:15:30 2012] 2604.308000 total counts/ 1766.560000 bgd. counts: snr = 19.931923
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.815909 pixels
  Position = (322.1, 409.9) = 3 32 26.95 -27 41 6.7
  Extent = 4.6 (4.3-4.9)", rotation angle = 0
  Source counts = 837.7 +/- 51.0
  Background counts = 1766.6
  Rate = 0.02 +/- 0.001
[Wed Jan 18 04:15:30 2012] Spatial fit model total counts = 1128.120000, observed total counts = 1130.000000
[Wed Jan 18 04:15:30 2012] Offset between fit and detection position for source 3 = 0.804684 pixels
[Wed Jan 18 04:15:30 2012] Warning, changing simple spatial fit ID from 3 to 13
[Wed Jan 18 04:15:30 2012] 1115.239000 total counts/ 775.161000 bgd. counts: snr = 12.214694
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.804684 pixels
  Position = (322.9, 410.0) = 3 32 26.68 -27 41 6.4
  Extent = 3.7 (3.3-4.1)", rotation angle = 0
  Source counts = 340.1 +/- 33.4
  Background counts = 775.2
  Rate = 0.007 +/- 0.0007
[Wed Jan 18 04:15:30 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 04:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 04:15:30 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 04:15:30 2012] Source does appear to be extended
[Wed Jan 18 04:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 04:15:48 2012] XMMSAS src. selection expression = ellipse(28044.842000, 35617.998000, 224.803806, 224.803806, 0.000000, X, Y)
[Wed Jan 18 04:15:48 2012] Writing source region out to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_src.reg
[Wed Jan 18 04:15:48 2012] Extracting stamp from image fullrun_pn_xmm0108061801_pi300-10000_cl_sm2.00.img.gz, (310, 397) - (336, 423)
[Wed Jan 18 04:15:48 2012] XMMSAS bgd. selection expression = annulus(28044.842000, 35617.998000, 374.673011, 749.346022, X, Y) && !ellipse(28122.569040, 36207.106000, 355.792810, 355.792810, 0.000000, X, Y) && !ellipse(25827.390600, 37745.998000, 1827.704053, 522.345615, 130.630000, X, Y) && !ellipse(28755.411041, 35288.158417, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 04:15:48 2012] Writing fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3.gif
[Wed Jan 18 04:18:19 2012] Mean detx,y = (-4275.04, -7910.41) 
[Wed Jan 18 04:18:21 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 04:18:28 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 04:18:29 2012] Setting source spectrum file to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 18 04:18:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Jan 18 05:47:39 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:47:39 2012] Error reading totcts from fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Jan 18 05:47:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:47:39 2012] Using photon index=1.80, rate=0.00677, arf fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3.arf
[Wed Jan 18 05:47:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:47:39 2012] Updating source flux to 5.3e-14
[Wed Jan 18 05:48:40 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Wed Jan 18 05:49:58 2012] Reading fit data from xmm0108061801/analysis//spectral/fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_pl.csv
[Wed Jan 18 05:49:58 2012] Spectral fit parameter nH value = 1.1579e+14
[Wed Jan 18 05:49:58 2012] Spectral fit parameter PhoIndex value = 2.07159
[Wed Jan 18 05:49:58 2012] Failed to get F(0.3-8.0) from xmm0108061801/analysis//spectral/fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Wed Jan 18 05:49:58 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:49:58 2012] Using Nh = 1.2e+14, photon index=2.07, rate=0.00677, arf fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src3.arf
[Wed Jan 18 05:49:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:49:58 2012] Updating source flux to 4.5e-14