[Wed Jan 18 00:08:14 2012] Detection parameters:
  Position = (258.5, 400.1) = 3 32 47.79 -27 41 47.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 381.5 +/- 26.8
  Background counts = 97.6
  Rate = 0.007 +/- 0.0005

[Wed Jan 18 00:08:14 2012] Off-axis axis estimate = 7.92'
[Wed Jan 18 00:10:05 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 00:10:05 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed Jan 18 00:10:05 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Wed Jan 18 00:10:05 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.39"
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15.ximg exists
[Wed Jan 18 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15.csv
[Wed Jan 18 00:54:20 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Jan 18 00:54:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15.csv
[Wed Jan 18 00:54:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 00:54:21 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Jan 18 00:54:21 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Jan 18 00:54:21 2012] Fit fullrun_pn_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Jan 18 02:16:22 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.887271 pixels away
[Wed Jan 18 02:16:22 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:16:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:16:22 2012] Assessing source extent using major
[Wed Jan 18 02:16:22 2012] Source does appear to be extended
[Wed Jan 18 02:16:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 02:16:39 2012] Using EEF radius (= 10.39 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 02:16:39 2012] Initial guess for spatial extent in simple fitting = 10.39"
[Wed Jan 18 02:16:39 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.899
[Wed Jan 18 02:16:39 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.39"
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15.ximg exists
[Wed Jan 18 03:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15.csv
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Jan 18 03:02:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15.csv
[Wed Jan 18 03:02:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Jan 18 03:02:36 2012] fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Jan 18 03:02:36 2012] Fit fullrun_pn_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Jan 18 04:15:30 2012] Spatial fit model total counts = 1309.000000, observed total counts = 1309.000000
[Wed Jan 18 04:15:30 2012] Offset between fit and detection position for source 17 = 0.134558 pixels
[Wed Jan 18 04:15:30 2012] 1302.239000 total counts/ 1091.870000 bgd. counts: snr = 6.366435
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.134558 pixels
  Position = (258.4, 400.2) = 3 32 47.82 -27 41 48.9
  Extent = 4.8 (4.1-5.6)", rotation angle = 0
  Source counts = 210.4 +/- 36.1
  Background counts = 1091.9
  Rate = 0.004 +/- 0.0007
[Wed Jan 18 04:15:30 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 04:15:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 04:15:30 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 04:15:30 2012] Source does appear to be extended
[Wed Jan 18 04:15:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 04:15:48 2012] XMMSAS src. selection expression = ellipse(22429.440400, 34765.860000, 289.583408, 289.583408, 0.000000, X, Y)
[Wed Jan 18 04:15:48 2012] Writing source region out to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17_src.reg
[Wed Jan 18 04:15:48 2012] Extracting stamp from image fullrun_pn_xmm0108061801_pi300-10000_cl_sm2.00.img.gz, (242, 384) - (275, 417)
[Wed Jan 18 04:15:48 2012] XMMSAS bgd. selection expression = annulus(22429.440400, 34765.860000, 482.639014, 965.278028, X, Y) && !ellipse(22405.616600, 33855.871600, 352.892010, 352.892010, 0.000000, X, Y)
[Wed Jan 18 04:15:48 2012] Writing fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17.gif
[Wed Jan 18 04:23:55 2012] Mean detx,y = (-8612.38, -4299.07) 
[Wed Jan 18 04:23:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 04:24:04 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 04:24:04 2012] Setting source spectrum file to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jan 18 04:24:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed Jan 18 05:47:39 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:47:39 2012] Error reading totcts from fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed Jan 18 05:47:39 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:47:39 2012] Using photon index=1.80, rate=0.00419, arf fullrun_pn_xmm0108061801_pi300-10000_pass1_cl_src17.arf
[Wed Jan 18 05:47:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:47:39 2012] Updating source flux to 2.6e-14