[Wed Jan 18 00:08:17 2012] Detection parameters:
  Position = (324.1, 416.8) = 3 32 26.30 -27 40 36.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 209.0 +/- 18.3
  Background counts = 17.5
  Rate = 0.007 +/- 0.0006

[Wed Jan 18 00:08:18 2012] Off-axis axis estimate = 8.78'
[Wed Jan 18 01:38:20 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 01:38:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 01:38:20 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Wed Jan 18 01:38:20 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.009
[Wed Jan 18 01:38:20 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.82"
[Wed Jan 18 02:16:16 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jan 18 02:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3.csv
[Wed Jan 18 02:16:16 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jan 18 02:16:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3.csv
[Wed Jan 18 02:16:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 02:16:16 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jan 18 02:16:16 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jan 18 02:16:16 2012] Fit fullrun_mos2_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jan 18 02:16:29 2012] Source 9 is offset by -7.637290 and -3.933707 pixels which is larger than
2 X fitted extent = 1.214575 x 1.214575, not incorporating fit results
[Wed Jan 18 02:16:29 2012] Spatial fit model total counts = 699.217000, observed total counts = 702.000000
[Wed Jan 18 02:16:29 2012] Offset between fit and detection position for source 9 = 7.615676 pixels
[Wed Jan 18 02:16:29 2012] 556.603685 total counts/ 0.584685 bgd. counts: snr = 727.157782
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 7.615676 pixels
  Position = (326.7, 423.9) = 3 32 25.46 -27 40 5.5
  Extent = 21.6 (21.6-43.3)", rotation angle = 0
  Source counts = 556.0 +/- 23.6
  Background counts = 0.6
  Rate = 0.01 +/- 0.0004
[Wed Jan 18 02:16:29 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:16:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:16:29 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 02:16:29 2012] Source does appear to be extended
[Wed Jan 18 02:16:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 02:16:29 2012] Source is confused with source 3
[Wed Jan 18 03:37:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 03:37:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 03:37:49 2012] Initial guess for spatial extent in simple fitting = 21.64"
[Wed Jan 18 03:37:49 2012] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.010
[Wed Jan 18 03:37:49 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 21.64"
[Wed Jan 18 04:15:22 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jan 18 04:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3.csv
[Wed Jan 18 04:15:22 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jan 18 04:15:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3.csv
[Wed Jan 18 04:15:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 04:15:23 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jan 18 04:15:23 2012] fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jan 18 04:15:23 2012] Fit fullrun_mos2_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jan 18 04:15:38 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Wed Jan 18 04:15:38 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 04:15:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 04:15:38 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 04:15:38 2012] Source does appear to be extended
[Wed Jan 18 04:15:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 05:23:54 2012] XMMSAS src. selection expression = ellipse(28371.158000, 36834.886000, 1298.178037, 1298.178037, 0.000000, X, Y)
[Wed Jan 18 05:23:54 2012] Writing source region out to fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9_src.reg
[Wed Jan 18 05:23:54 2012] Extracting stamp from image fullrun_mos2_xmm0108061801_pi300-10000_cl_sm2.00.img.gz, (252, 349) - (401, 499)
[Wed Jan 18 05:23:54 2012] XMMSAS bgd. selection expression = annulus(28371.158000, 36834.886000, 2163.630062, 4327.260125, X, Y) && !ellipse(28005.628113, 35624.784271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25071.279114, 37208.368530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30861.882200, 37500.461200, 276.436808, 276.436808, 0.000000, X, Y) && !ellipse(32096.295471, 39993.714630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33062.606659, 39875.021545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23936.259399, 39025.454651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26063.545868, 37860.215393, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 05:23:54 2012] Writing fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9.gif
[Wed Jan 18 05:24:18 2012] Mean detx,y = (4702.11, 8442.49) 
[Wed Jan 18 05:24:19 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 05:24:53 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 05:24:54 2012] Setting source spectrum file to fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jan 18 05:24:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Jan 18 05:47:40 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:47:40 2012] Error reading totcts from fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Jan 18 05:47:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:47:40 2012] Using photon index=1.80, rate=0.01, arf fullrun_mos2_xmm0108061801_pi300-10000_pass1_cl_src9.arf
[Wed Jan 18 05:47:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:47:40 2012] Updating source flux to 1.8e-13
[Wed Jan 18 05:47:57 2012] Flag b found in src. 9 procflags, skipping spectral fitting
[Wed Jan 18 05:47:57 2012] Flag c found in src. 9 procflags, skipping spectral fitting