[Wed Jan 18 00:08:15 2012] Detection parameters:
  Position = (436.9, 379.2) = 3 31 49.34 -27 43 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.8 +/- 11.8
  Background counts = 18.6
  Rate = 0.002 +/- 0.0004

[Wed Jan 18 00:08:16 2012] Off-axis axis estimate = 11.62'
[Wed Jan 18 00:54:21 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 00:54:21 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 00:54:21 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Wed Jan 18 00:54:21 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Wed Jan 18 00:54:21 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 12.24"
[Wed Jan 18 01:38:19 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11.ximg exists
[Wed Jan 18 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11.csv
[Wed Jan 18 01:38:19 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11_1.ximg exists
[Wed Jan 18 01:38:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11.csv
[Wed Jan 18 01:38:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 01:38:20 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Wed Jan 18 01:38:20 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Wed Jan 18 01:38:20 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Wed Jan 18 02:16:26 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.536991 pixels away
[Wed Jan 18 02:16:26 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:16:26 2012] Assessing source extent using major
[Wed Jan 18 02:16:26 2012] Source does appear to be extended
[Wed Jan 18 02:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 03:02:37 2012] Using EEF radius (= 12.24 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 03:02:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jan 18 03:02:37 2012] Initial guess for spatial extent in simple fitting = 12.24"
[Wed Jan 18 03:02:37 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.956
[Wed Jan 18 03:02:37 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.24"
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src11.ximg exists
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src11_1.ximg exists
[Wed Jan 18 03:37:49 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src11 appears to have run properly
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Wed Jan 18 03:37:49 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Wed Jan 18 04:15:34 2012] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 11.452174 pixels away
[Wed Jan 18 04:15:35 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 04:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 04:15:35 2012] Assessing source extent using major
[Wed Jan 18 04:15:35 2012] Source does appear to be extended
[Wed Jan 18 04:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 05:07:20 2012] XMMSAS src. selection expression = ellipse(37960.917999, 32944.234833, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jan 18 05:07:20 2012] Writing source region out to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22_src.reg
[Wed Jan 18 05:07:20 2012] Extracting stamp from image fullrun_mos1_xmm0108061801_pi300-10000_cl_sm2.00.img.gz, (399, 342) - (474, 417)
[Wed Jan 18 05:07:21 2012] XMMSAS bgd. selection expression = annulus(37960.917999, 32944.234833, 1087.500000, 2175.000000, X, Y) && !ellipse(35080.925415, 32914.904724, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 05:07:21 2012] Writing fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22.gif
[Wed Jan 18 05:09:10 2012] Mean detx,y = (10851.83, 5246.47) 
[Wed Jan 18 05:09:11 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 05:09:26 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 05:09:26 2012] Setting source spectrum file to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jan 18 05:09:26 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Jan 18 05:23:08 2012] Not generating rmf since there are only 71 counts
[Wed Jan 18 05:23:08 2012] rmf not generated due to insufficient counts
[Wed Jan 18 05:47:40 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:47:40 2012] Error reading totcts from fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Jan 18 05:47:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:47:40 2012] Using photon index=1.80, rate=0.00247, arf fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src22.arf
[Wed Jan 18 05:47:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:47:40 2012] Updating source flux to 4.4e-14
[Wed Jan 18 05:47:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting