[Wed Jan 18 00:08:15 2012] Detection parameters:
  Position = (352.3, 382.2) = 3 32 17.04 -27 43 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.9 +/- 10.5
  Background counts = 20.6
  Rate = 0.001 +/- 0.0003

[Wed Jan 18 00:08:16 2012] Off-axis axis estimate = 7.22'
[Wed Jan 18 00:54:21 2012] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Wed Jan 18 00:54:21 2012] Initial guess for spatial extent in simple fitting = 10.04"
[Wed Jan 18 00:54:21 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.951
[Wed Jan 18 00:54:21 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 10.04"
[Wed Jan 18 01:38:19 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src28.ximg exists
[Wed Jan 18 01:38:19 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src28_1.ximg exists
[Wed Jan 18 01:38:19 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_src28 appears to have run properly
[Wed Jan 18 01:38:20 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Wed Jan 18 01:38:20 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Wed Jan 18 01:38:20 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Wed Jan 18 02:16:26 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 20 at 10.064170 pixels away
[Wed Jan 18 02:16:26 2012] Spatial fit model total counts = 219.599000, observed total counts = 220.000000
[Wed Jan 18 02:16:26 2012] Offset between fit and detection position for source 20 = 0.135089 pixels
[Wed Jan 18 02:16:26 2012] 225.944800 total counts/ 189.168000 bgd. counts: snr = 2.673930
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.135089 pixels
  Position = (352.2, 382.2) = 3 32 17.08 -27 43 7.2
  Extent = 5.7 (3.8-8.2)", rotation angle = 0
  Source counts = 36.8 +/- 15.0
  Background counts = 189.2
  Rate = 0.0007 +/- 0.0003
[Wed Jan 18 02:16:26 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 02:16:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 02:16:26 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 02:16:26 2012] Source does appear to be extended
[Wed Jan 18 02:16:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 03:02:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jan 18 03:02:37 2012] Initial guess for spatial extent in simple fitting = 5.68"
[Wed Jan 18 03:02:37 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.225
[Wed Jan 18 03:02:37 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 5.68"
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27.ximg exists
[Wed Jan 18 03:37:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27.csv
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27_1.ximg exists
[Wed Jan 18 03:37:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27.csv
[Wed Jan 18 03:37:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Wed Jan 18 03:37:49 2012] fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Wed Jan 18 03:37:49 2012] Fit fullrun_mos1_xmm0108061801_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Wed Jan 18 04:15:35 2012] Spatial fit model total counts = 220.000000, observed total counts = 220.000000
[Wed Jan 18 04:15:35 2012] Offset between fit and detection position for source 20 = 0.014558 pixels
[Wed Jan 18 04:15:35 2012] 226.289600 total counts/ 188.750000 bgd. counts: snr = 2.732412
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.014558 pixels
  Position = (352.2, 382.2) = 3 32 17.08 -27 43 7.2
  Extent = 5.6 (3.8-8.1)", rotation angle = 0
  Source counts = 37.5 +/- 15.0
  Background counts = 188.8
  Rate = 0.0007 +/- 0.0003
[Wed Jan 18 04:15:35 2012] Vigneting correction estimate = 1.000000
[Wed Jan 18 04:15:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jan 18 04:15:35 2012] Assessing source extent using major axis lower bound
[Wed Jan 18 04:15:35 2012] Source does appear to be extended
[Wed Jan 18 04:15:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jan 18 05:07:21 2012] XMMSAS src. selection expression = ellipse(30594.424600, 33200.475600, 334.576210, 334.576210, 0.000000, X, Y)
[Wed Jan 18 05:07:21 2012] Writing source region out to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20_src.reg
[Wed Jan 18 05:07:21 2012] Extracting stamp from image fullrun_mos1_xmm0108061801_pi300-10000_cl_sm2.00.img.gz, (333, 363) - (371, 401)
[Wed Jan 18 05:07:21 2012] XMMSAS bgd. selection expression = annulus(30594.424600, 33200.475600, 557.627016, 1115.254032, X, Y) && !ellipse(32384.761749, 33136.995270, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jan 18 05:07:21 2012] Writing fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20.gif
[Wed Jan 18 05:12:15 2012] Mean detx,y = (7256.64, -1144.83) 
[Wed Jan 18 05:12:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jan 18 05:12:22 2012] Binned source spectrum to 10 counts/bin
[Wed Jan 18 05:12:22 2012] Setting source spectrum file to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jan 18 05:12:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Wed Jan 18 05:23:37 2012] Not generating rmf since there are only 37 counts
[Wed Jan 18 05:23:37 2012] rmf not generated due to insufficient counts
[Wed Jan 18 05:47:40 2012] Updating aperture counts using extracted products
[Wed Jan 18 05:47:40 2012] Error reading totcts from fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Wed Jan 18 05:47:40 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jan 18 05:47:40 2012] Using photon index=1.80, rate=0.000666, arf fullrun_mos1_xmm0108061801_pi300-10000_pass1_cl_src20.arf
[Wed Jan 18 05:47:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jan 18 05:47:40 2012] Updating source flux to 1.1e-14
[Wed Jan 18 05:47:42 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting