[Tue Jan 17 00:43:40 2012] Detection parameters:
  Position = (321.0, 418.9) = 3 32 26.23 -27 40 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 362.8 +/- 24.6
  Background counts = 37.5
  Rate = 0.007 +/- 0.0005

[Tue Jan 17 00:43:41 2012] Off-axis axis estimate = 8.88'
[Tue Jan 17 02:40:39 2012] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 02:40:39 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 02:40:39 2012] Initial guess for spatial extent in simple fitting = 10.87"
[Tue Jan 17 02:40:39 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.001
[Tue Jan 17 02:40:39 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.87"
[Tue Jan 17 03:28:03 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 03:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 03:28:03 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 03:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 03:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 03:28:04 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 03:28:04 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 03:28:04 2012] Fit fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 03:28:30 2012] Source 4 is offset by -7.758003 and -3.878273 pixels which is larger than
2 X fitted extent = 1.220051 x 1.220051, not incorporating fit results
[Tue Jan 17 03:28:30 2012] Spatial fit model total counts = 1165.990000, observed total counts = 1166.000000
[Tue Jan 17 03:28:30 2012] Offset between fit and detection position for source 4 = 0.203204 pixels
[Tue Jan 17 03:28:30 2012] 1014.411000 total counts/ 860.051000 bgd. counts: snr = 5.263476
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.203204 pixels
  Position = (320.8, 418.8) = 3 32 26.29 -27 40 36.5
  Extent = 3.6 (2.8-4.4)", rotation angle = 0
  Source counts = 154.4 +/- 31.8
  Background counts = 860.1
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 03:28:30 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 03:28:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 03:28:30 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 03:28:30 2012] Source does appear to be extended
[Tue Jan 17 03:28:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 03:28:30 2012] Source is confused with source 3
[Tue Jan 17 05:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 05:03:27 2012] Initial guess for spatial extent in simple fitting = 3.58"
[Tue Jan 17 05:03:27 2012] source mask rpix=0.8, npix_max = 7, mask sum = 6, frac = 0.856
[Tue Jan 17 05:03:27 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 3.58"
[Tue Jan 17 05:47:21 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3.ximg exists
[Tue Jan 17 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 05:47:21 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Jan 17 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3.csv
[Tue Jan 17 05:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 05:47:22 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Jan 17 05:47:22 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Jan 17 05:47:22 2012] Fit fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Jan 17 05:47:46 2012] Spatial fit model total counts = 1168.550000, observed total counts = 1166.000000
[Tue Jan 17 05:47:46 2012] Offset between fit and detection position for source 4 = 0.016939 pixels
[Tue Jan 17 05:47:46 2012] 1017.371000 total counts/ 864.327000 bgd. counts: snr = 5.205678
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.016939 pixels
  Position = (320.8, 418.8) = 3 32 26.28 -27 40 36.6
  Extent = 3.5 (2.8-4.4)", rotation angle = 0
  Source counts = 153.0 +/- 31.9
  Background counts = 864.3
  Rate = 0.002 +/- 0.0003
[Tue Jan 17 05:47:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:47:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 05:47:46 2012] Source does appear to be extended
[Tue Jan 17 05:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:29:03 2012] XMMSAS src. selection expression = ellipse(27864.717700, 36383.807000, 208.716006, 208.716006, 0.000000, X, Y)
[Tue Jan 17 07:29:03 2012] Writing source region out to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4_src.reg
[Tue Jan 17 07:29:03 2012] Extracting stamp from image fullrun_mos2_xmm0108060701_pi300-10000_cl_sm2.00.img.gz, (309, 407) - (333, 431)
[Tue Jan 17 07:29:03 2012] XMMSAS bgd. selection expression = annulus(27864.717700, 36383.807000, 347.860010, 695.720020, X, Y) && !ellipse(27743.207672, 35793.954773, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28996.584000, 34924.524000, 1682.208048, 1682.208048, 0.000000, X, Y)
[Tue Jan 17 07:29:03 2012] Writing fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4.gif
[Tue Jan 17 07:29:33 2012] Mean detx,y = (5016.47, 8304.13) 
[Tue Jan 17 07:29:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 07:29:38 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 07:29:38 2012] Setting source spectrum file to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 07:29:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jan 17 07:59:27 2012] Updating aperture counts using extracted products
[Tue Jan 17 07:59:27 2012] Error reading totcts from fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jan 17 07:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 07:59:27 2012] Using photon index=1.80, rate=0.00166, arf fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src4.arf
[Tue Jan 17 07:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 07:59:27 2012] Updating source flux to 6e-14
[Tue Jan 17 08:00:15 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Tue Jan 17 08:00:15 2012] Flag c found in src. 4 procflags, skipping spectral fitting