[Tue Jan 17 00:43:40 2012] Detection parameters:
  Position = (375.1, 322.2) = 3 32 8.50 -27 47 36.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1466.8 +/- 46.8
  Background counts = 42.8
  Rate = 0.02 +/- 0.0006

[Tue Jan 17 00:43:41 2012] Off-axis axis estimate = 5.82'
[Tue Jan 17 02:40:39 2012] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 02:40:39 2012] Initial guess for spatial extent in simple fitting = 9.34"
[Tue Jan 17 02:40:39 2012] source mask rpix=2.1, npix_max = 28, mask sum = 29, frac = 1.035
[Tue Jan 17 02:40:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.34"
[Tue Jan 17 03:28:03 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jan 17 03:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 03:28:03 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jan 17 03:28:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1.csv
[Tue Jan 17 03:28:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 03:28:04 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jan 17 03:28:04 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jan 17 03:28:04 2012] Fit fullrun_mos2_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Jan 17 03:28:30 2012] Spatial fit model total counts = 1728.830000, observed total counts = 1728.000000
[Tue Jan 17 03:28:30 2012] Offset between fit and detection position for source 1 = 0.179510 pixels
[Tue Jan 17 03:28:30 2012] 1721.936000 total counts/ 721.036000 bgd. counts: snr = 37.274533
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179510 pixels
  Position = (374.9, 322.3) = 3 32 8.55 -27 47 36.2
  Extent = 4.9 (4.7-5.2)", rotation angle = 0
  Source counts = 1000.9 +/- 41.5
  Background counts = 721.0
  Rate = 0.01 +/- 0.0004
[Tue Jan 17 03:28:30 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 03:28:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 03:28:30 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 03:28:30 2012] Source does appear to be extended
[Tue Jan 17 03:28:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 03:28:30 2012] Source is confused with source 32
[Tue Jan 17 05:03:27 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jan 17 05:03:27 2012] Initial guess for spatial extent in simple fitting = 4.93"
[Tue Jan 17 05:03:27 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.123
[Tue Jan 17 05:03:27 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.93"
[Tue Jan 17 05:47:21 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jan 17 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 05:47:21 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jan 17 05:47:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1.csv
[Tue Jan 17 05:47:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 05:47:22 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jan 17 05:47:22 2012] fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jan 17 05:47:22 2012] Fit fullrun_mos2_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Jan 17 05:47:46 2012] Warning, spatial fit 1 centroid is now closest to src. 31
[Tue Jan 17 05:47:46 2012] Spatial fit model total counts = 1553.200000, observed total counts = 1550.000000
[Tue Jan 17 05:47:46 2012] Offset between fit and detection position for source 1 = 0.015955 pixels
[Tue Jan 17 05:47:46 2012] Warning, changing simple spatial fit ID from 1 to 38
[Tue Jan 17 05:47:46 2012] 1579.823000 total counts/ 651.802000 bgd. counts: snr = 36.349627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.015955 pixels
  Position = (374.9, 322.3) = 3 32 8.55 -27 47 36.3
  Extent = 4.6 (4.3-4.9)", rotation angle = 0
  Source counts = 928.0 +/- 39.7
  Background counts = 651.8
  Rate = 0.01 +/- 0.0004
[Tue Jan 17 05:47:46 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:47:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:47:46 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 05:47:46 2012] Source does appear to be extended
[Tue Jan 17 05:47:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 07:29:03 2012] XMMSAS src. selection expression = ellipse(32569.029400, 27987.366000, 273.172208, 273.172208, 0.000000, X, Y)
[Tue Jan 17 07:29:03 2012] Writing source region out to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_src.reg
[Tue Jan 17 07:29:03 2012] Extracting stamp from image fullrun_mos2_xmm0108060701_pi300-10000_cl_sm2.00.img.gz, (359, 307) - (391, 338)
[Tue Jan 17 07:29:03 2012] XMMSAS bgd. selection expression = annulus(32569.029400, 27987.366000, 455.287013, 910.574026, X, Y) && !ellipse(32433.808105, 27418.386078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32735.692902, 28729.511230, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jan 17 07:29:03 2012] Writing fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1.gif
[Tue Jan 17 07:29:07 2012] Mean detx,y = (-3391.80, 3622.88) 
[Tue Jan 17 07:29:08 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 07:29:12 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 07:29:12 2012] Setting source spectrum file to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 07:29:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jan 17 07:59:27 2012] Updating aperture counts using extracted products
[Tue Jan 17 07:59:27 2012] Error reading totcts from fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jan 17 07:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 07:59:27 2012] Using photon index=1.80, rate=0.0101, arf fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 07:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 07:59:27 2012] Updating source flux to 1.6e-13
[Tue Jan 17 08:00:15 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jan 17 08:00:51 2012] Reading fit data from xmm0108060701/analysis//spectral/fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jan 17 08:00:51 2012] Spectral fit parameter nH value = 3.78481e+20
[Tue Jan 17 08:00:51 2012] Spectral fit parameter PhoIndex value = 1.9776
[Tue Jan 17 08:00:51 2012] Failed to get F(0.3-8.0) from xmm0108060701/analysis//spectral/fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jan 17 08:00:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 08:00:51 2012] Using Nh = 3.8e+20, photon index=1.98, rate=0.0101, arf fullrun_mos2_xmm0108060701_pi300-10000_pass1_cl_src1.arf
[Tue Jan 17 08:00:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 08:00:51 2012] Updating source flux to 1.5e-13