[Tue Jan 17 00:43:38 2012] Detection parameters:
  Position = (320.8, 418.7) = 3 32 26.30 -27 40 36.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 433.9 +/- 26.9
  Background counts = 38.7
  Rate = 0.009 +/- 0.0005

[Tue Jan 17 00:43:39 2012] Off-axis axis estimate = 8.87'
[Tue Jan 17 01:52:54 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 01:52:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 01:52:54 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Tue Jan 17 01:52:54 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Tue Jan 17 01:52:54 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.86"
[Tue Jan 17 02:40:38 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3.ximg exists
[Tue Jan 17 02:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 02:40:38 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Jan 17 02:40:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3.csv
[Tue Jan 17 02:40:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jan 17 02:40:38 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Jan 17 02:40:38 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Jan 17 02:40:38 2012] Fit fullrun_mos1_xmm0108060701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Jan 17 03:28:23 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 13.435804 pixels away
[Tue Jan 17 03:28:23 2012] Source 3 is offset by 1.640300 and 5.293902 pixels which is larger than
2 X fitted extent = 3.887421 x 3.887421, not incorporating fit results
[Tue Jan 17 03:28:23 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 03:28:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 03:28:23 2012] Assessing source extent using major
[Tue Jan 17 03:28:23 2012] Source does appear to be extended
[Tue Jan 17 03:28:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 03:28:23 2012] Source is confused with source 2
[Tue Jan 17 04:21:12 2012] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Tue Jan 17 04:21:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jan 17 04:21:12 2012] Initial guess for spatial extent in simple fitting = 10.86"
[Tue Jan 17 04:21:12 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Tue Jan 17 04:21:12 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.86"
[Tue Jan 17 05:03:26 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_src2.ximg exists
[Tue Jan 17 05:03:26 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Jan 17 05:03:26 2012] Fit fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_src2 appears to have run properly
[Tue Jan 17 05:03:26 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Jan 17 05:03:26 2012] fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Jan 17 05:03:26 2012] Fit fullrun_mos1_xmm0108060701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Jan 17 05:47:39 2012] Spatial fit model total counts = 1191.110000, observed total counts = 1247.000000
[Tue Jan 17 05:47:39 2012] Offset between fit and detection position for source 3 = 4.216132 pixels
[Tue Jan 17 05:47:39 2012] 1036.884000 total counts/ 158.229000 bgd. counts: snr = 69.851437
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.216132 pixels
  Position = (322.1, 422.7) = 3 32 25.86 -27 40 19.3
  Extent = 20.0 (20.0-20.0)", rotation angle = 0
  Source counts = 878.7 +/- 32.2
  Background counts = 158.2
  Rate = 0.01 +/- 0.0003
[Tue Jan 17 05:47:39 2012] Vigneting correction estimate = 1.000000
[Tue Jan 17 05:47:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jan 17 05:47:39 2012] Assessing source extent using major axis lower bound
[Tue Jan 17 05:47:39 2012] Source does appear to be extended
[Tue Jan 17 05:47:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jan 17 06:57:57 2012] XMMSAS src. selection expression = ellipse(27977.555800, 36728.524000, 1202.562035, 1202.562035, 0.000000, X, Y)
[Tue Jan 17 06:57:57 2012] Writing source region out to fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3_src.reg
[Tue Jan 17 06:57:57 2012] Extracting stamp from image fullrun_mos1_xmm0108060701_pi300-10000_cl_sm2.00.img.gz, (253, 354) - (391, 492)
[Tue Jan 17 06:57:57 2012] XMMSAS bgd. selection expression = annulus(27977.555800, 36728.524000, 2004.270058, 4008.540115, X, Y) && !ellipse(27715.790920, 35755.046800, 518.444815, 518.444815, 0.000000, X, Y) && !ellipse(24721.966400, 37388.487600, 374.368811, 374.368811, 0.000000, X, Y) && !ellipse(31820.862732, 40155.331573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30600.560822, 37682.145233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32038.678680, 31977.435120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30356.523804, 33432.553131, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27673.874237, 35045.815308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32155.202606, 33315.275177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23610.164200, 39161.239000, 506.416815, 319.795209, 338.274298, X, Y) && !ellipse(25718.896300, 38014.621800, 469.484814, 469.484814, 0.000000, X, Y)
[Tue Jan 17 06:57:57 2012] Writing fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3.gif
[Tue Jan 17 06:58:24 2012] Mean detx,y = (8517.89, -5116.52) 
[Tue Jan 17 06:58:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan 17 06:58:50 2012] Binned source spectrum to 10 counts/bin
[Tue Jan 17 06:58:50 2012] Setting source spectrum file to fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 06:58:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Jan 17 07:59:26 2012] Updating aperture counts using extracted products
[Tue Jan 17 07:59:26 2012] Error reading totcts from fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Jan 17 07:59:27 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan 17 07:59:27 2012] Using photon index=1.80, rate=0.00951, arf fullrun_mos1_xmm0108060701_pi300-10000_pass1_cl_src3.arf
[Tue Jan 17 07:59:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan 17 07:59:27 2012] Updating source flux to 1.5e-13
[Tue Jan 17 07:59:30 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Tue Jan 17 07:59:30 2012] Flag c found in src. 3 procflags, skipping spectral fitting