[Sun Mar 11 15:14:37 2012] Detection parameters:
  Position = (317.9, 365.6) = 3 32 13.02 -27 42 42.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.6 +/- 15.8
  Background counts = 71.1
  Rate = 0.004 +/- 0.0007

[Sun Mar 11 15:14:38 2012] Off-axis axis estimate = 5.07'
[Sun Mar 11 15:17:28 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 15:17:28 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Sun Mar 11 15:17:28 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Sun Mar 11 15:17:28 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 8.96"
[Sun Mar 11 16:02:33 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10.ximg exists
[Sun Mar 11 16:02:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10.csv
[Sun Mar 11 16:02:33 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10_1.ximg exists
[Sun Mar 11 16:02:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10.csv
[Sun Mar 11 16:02:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:02:34 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sun Mar 11 16:02:34 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sun Mar 11 16:02:34 2012] Fit fullrun_pn_xmm0108060401_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sun Mar 11 16:59:38 2012] Source 11 is offset by -7.998747 and 5.864538 pixels which is larger than
2 X fitted extent = 1.034680 x 1.034680, not incorporating fit results
[Sun Mar 11 16:59:38 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:59:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:59:38 2012] Assessing source extent using major
[Sun Mar 11 16:59:38 2012] Source does appear to be extended
[Sun Mar 11 16:59:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:59:58 2012] Using EEF radius (= 8.96 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 16:59:58 2012] Initial guess for spatial extent in simple fitting = 8.96"
[Sun Mar 11 16:59:58 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.953
[Sun Mar 11 16:59:58 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 8.96"
[Sun Mar 11 17:44:05 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10.ximg exists
[Sun Mar 11 17:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10.csv
[Sun Mar 11 17:44:05 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10_1.ximg exists
[Sun Mar 11 17:44:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10.csv
[Sun Mar 11 17:44:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 17:44:06 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sun Mar 11 17:44:06 2012] fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sun Mar 11 17:44:06 2012] Fit fullrun_pn_xmm0108060401_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Sun Mar 11 18:37:53 2012] Spatial fit model total counts = 269.000000, observed total counts = 269.000000
[Sun Mar 11 18:37:53 2012] Offset between fit and detection position for source 11 = 0.332495 pixels
[Sun Mar 11 18:37:53 2012] 271.629600 total counts/ 236.055000 bgd. counts: snr = 2.315439
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.332495 pixels
  Position = (317.5, 365.6) = 3 32 13.13 -27 42 42.5
  Extent = 3.8 (2.6-5.0)", rotation angle = 0
  Source counts = 35.6 +/- 16.5
  Background counts = 236.1
  Rate = 0.002 +/- 0.0008
[Sun Mar 11 18:37:53 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 18:37:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 18:37:53 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 18:37:53 2012] Source does appear to be extended
[Sun Mar 11 18:37:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 18:38:08 2012] XMMSAS src. selection expression = ellipse(27577.408000, 31762.295000, 228.909607, 228.909607, 0.000000, X, Y)
[Sun Mar 11 18:38:08 2012] Writing source region out to fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11_src.reg
[Sun Mar 11 18:38:08 2012] Extracting stamp from image fullrun_pn_xmm0108060401_pi300-10000_cl_sm2.00.img.gz, (304, 352) - (331, 379)
[Sun Mar 11 18:38:08 2012] XMMSAS bgd. selection expression = annulus(27577.408000, 31762.295000, 381.516011, 763.032022, X, Y) && !ellipse(26546.736800, 31344.488400, 482.174414, 482.174414, 0.000000, X, Y)
[Sun Mar 11 18:38:08 2012] Writing fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11.gif
[Sun Mar 11 18:45:03 2012] Mean detx,y = (536.79, 7336.95) 
[Sun Mar 11 18:45:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 11 18:45:24 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 11 18:45:25 2012] Setting source spectrum file to fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 11 18:45:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sun Mar 11 19:02:52 2012] Not generating rmf since there are only 35 counts
[Sun Mar 11 19:02:52 2012] rmf not generated due to insufficient counts
[Sun Mar 11 19:48:10 2012] Updating aperture counts using extracted products
[Sun Mar 11 19:48:10 2012] Error reading totcts from fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sun Mar 11 19:48:11 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 11 19:48:11 2012] Using photon index=1.80, rate=0.0017, arf fullrun_pn_xmm0108060401_pi300-10000_pass1_cl_src11.arf
[Sun Mar 11 19:48:11 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 11 19:48:11 2012] Updating source flux to 8.7e-15
[Sun Mar 11 19:48:59 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Sun Mar 11 19:48:59 2012] Source 11 has fewer than 100.000000 counts, skipping spectral fitting