[Mon Jun 10 16:36:22 2013] Detection parameters:
  Position = (313.3, 341.7) = 3 37 34.94 -25 18 4.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1410.7 +/- 47.3
  Background counts = 139.2
  Rate = 0.02 +/- 0.0008

[Mon Jun 10 16:36:23 2013] Off-axis axis estimate = 3.32'
[Mon Jun 10 16:40:00 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 16:40:00 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon Jun 10 16:40:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.123
[Mon Jun 10 16:40:00 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 8.09"
[Mon Jun 10 17:30:52 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 10 17:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 17:30:52 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 10 17:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3.csv
[Mon Jun 10 17:30:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3.csv
[Mon Jun 10 17:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:24:42 2013] Source 3 is offset by -4.215755 and -0.278016 pixels which is larger than
2 X fitted extent = 0.929646 x 0.929646, not incorporating fit results
[Mon Jun 10 18:24:42 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:24:42 2013] Assessing source extent using major
[Mon Jun 10 18:24:42 2013] Source does appear to be extended
[Mon Jun 10 18:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:25:00 2013] Using EEF radius (= 8.09 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:25:00 2013] Initial guess for spatial extent in simple fitting = 8.09"
[Mon Jun 10 18:25:00 2013] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.123
[Mon Jun 10 18:25:00 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 8.09"
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3.csv
[Mon Jun 10 19:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Mon Jun 10 19:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 20:00:45 2013] Source 3 is offset by -7.164307 and 6.178773 pixels which is larger than
2 X fitted extent = 0.929646 x 0.929646, not incorporating fit results
[Mon Jun 10 20:00:45 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 20:00:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 20:00:45 2013] Assessing source extent using major
[Mon Jun 10 20:00:45 2013] Source does appear to be extended
[Mon Jun 10 20:00:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 20:01:04 2013] Counts = 1410.655518, rescaling region sizes by 2.000000
[Mon Jun 10 20:01:04 2013] XMMSAS src. selection expression = ellipse(27206.241272, 29683.017212, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 20:01:04 2013] Writing source region out to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_src.reg
[Mon Jun 10 20:01:04 2013] Extracting stamp from image fullrun_pn_xmm0107860401_pi300-10000_cl_sm2.00.img.gz, (238, 267) - (388, 417)
[Mon Jun 10 20:01:04 2013] XMMSAS bgd. selection expression = annulus(27206.241272, 29683.017212, 4350.000000, 8700.000000, X, Y) && !ellipse(26491.029480, 23641.960022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.023041, 28545.727448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29891.450287, 21034.742493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35842.180725, 33447.814240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29035.545837, 29239.709625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22232.168671, 28725.873840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25523.315080, 28568.928800, 341.984010, 341.984010, 0.000000, X, Y) && !ellipse(25278.382000, 28390.854000, 1206.680035, 463.702413, 144.639000, X, Y) && !ellipse(34343.153839, 22675.832031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19691.741058, 35202.079712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33113.211517, 34448.733734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34775.594391, 27349.533203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.997000, 26965.988200, 597.730417, 417.311212, 18.159530, X, Y) && !ellipse(26741.191650, 26328.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25089.251600, 24764.337800, 340.412810, 340.412810, 0.000000, X, Y) && !ellipse(24433.771000, 24223.546200, 1174.472034, 690.367220, 61.679600, X, Y) && !ellipse(18969.273071, 23718.902771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20984.327469, 35719.043121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19233.394058, 31825.092194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.372800, 31845.664400, 1579.648045, 397.932811, 50.801272, X, Y) && !ellipse(31322.296800, 29809.848800, 341.472010, 341.472010, 0.000000, X, Y) && !ellipse(26869.872955, 28875.171448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19157.707400, 25866.088800, 372.609611, 372.609611, 0.000000, X, Y) && !ellipse(20044.265228, 25604.576263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.937800, 24480.038000, 1162.544033, 758.373622, 57.734300, X, Y) && !ellipse(19439.134933, 24825.104797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.729800, 21668.414800, 410.068812, 410.068812, 0.000000, X, Y) && !ellipse(22732.384155, 20443.739609, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 20:01:04 2013] Writing fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3.gif
[Mon Jun 10 20:05:41 2013] Mean detx,y = (-1744.84, 5299.21) 
[Mon Jun 10 20:05:47 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 20:08:02 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 20:08:02 2013] Setting source spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jun 10 20:08:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jun 10 20:34:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 20:34:32 2013] rmf not generated due to insufficient counts
[Mon Jun 10 21:40:15 2013] Updating aperture counts using extracted products
[Mon Jun 10 21:40:15 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 2219.00
[Mon Jun 10 21:40:15 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_bgd.pi.gz = 25539.00
[Mon Jun 10 21:40:15 2013] Got source and background scale factors 4658293.000000, 139742050.000000
[Mon Jun 10 21:40:15 2013] User source parameters:
  Position = (313.3, 341.7) = 3 37 34.94 -25 18 4.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1367.7 +/- 48.1
  Background aperture counts = 851.3
  Rate = 0.05 +/- 0.002

[Mon Jun 10 21:40:15 2013] Updating counts from extracted products
[Mon Jun 10 21:40:15 2013] Set source signif. to 1367.66/29.18 = 46.87
[Mon Jun 10 21:40:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 21:40:24 2013] Using photon index=1.80, rate=0.0477, arf fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3.arf
[Mon Jun 10 21:40:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 21:40:24 2013] Updating source flux to 1.6e-13
[Mon Jun 10 21:40:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 21:40:45 2013] xmm0107860401/analysis//spectral/fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete