[Mon Jun 10 16:36:22 2013] Detection parameters:
  Position = (307.9, 303.2) = 3 37 36.65 -25 20 52.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 307.6 +/- 25.5
  Background counts = 147.1
  Rate = 0.005 +/- 0.0004

[Mon Jun 10 16:36:23 2013] Off-axis axis estimate = 0.77'
[Mon Jun 10 16:40:00 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 16:40:00 2013] Initial guess for spatial extent in simple fitting = 6.81"
[Mon Jun 10 16:40:00 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Mon Jun 10 16:40:00 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 6.81"
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21_1.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21.csv
[Mon Jun 10 17:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Mon Jun 10 17:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:24:42 2013] Spatial fit model total counts = 678.268000, observed total counts = 517.000000
[Mon Jun 10 18:24:42 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 18:24:42 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:24:42 2013] Assessing source extent using major
[Mon Jun 10 18:24:42 2013] Source does appear to be extended
[Mon Jun 10 18:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:25:00 2013] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:25:00 2013] Initial guess for spatial extent in simple fitting = 6.81"
[Mon Jun 10 18:25:00 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.937
[Mon Jun 10 18:25:00 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 6.81"
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21.csv
[Mon Jun 10 19:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:09:54 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 10 19:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 10 19:09:54 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 10 19:09:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon Jun 10 19:09:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 20:00:45 2013] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 21.851653 pixels away
[Mon Jun 10 20:00:45 2013] Source 23 is offset by -4.189544 and -2.682952 pixels which is larger than
2 X fitted extent = 0.816060 x 0.816060, not incorporating fit results
[Mon Jun 10 20:00:45 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 20:00:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 20:00:45 2013] Assessing source extent using major
[Mon Jun 10 20:00:45 2013] Source does appear to be extended
[Mon Jun 10 20:00:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 20:01:05 2013] XMMSAS src. selection expression = ellipse(26741.191650, 26328.042542, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 10 20:01:05 2013] Writing source region out to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_src.reg
[Mon Jun 10 20:01:05 2013] Extracting stamp from image fullrun_pn_xmm0107860401_pi300-10000_cl_sm2.00.img.gz, (270, 266) - (345, 341)
[Mon Jun 10 20:01:05 2013] XMMSAS bgd. selection expression = annulus(26741.191650, 26328.042542, 1087.500000, 2175.000000, X, Y) && !ellipse(26491.029480, 23641.960022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.023041, 28545.727448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29035.545837, 29239.709625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25523.315080, 28568.928800, 341.984010, 341.984010, 0.000000, X, Y) && !ellipse(25278.382000, 28390.854000, 1206.680035, 463.702413, 144.639000, X, Y) && !ellipse(25378.997000, 26965.988200, 597.730417, 417.311212, 18.159530, X, Y) && !ellipse(25089.251600, 24764.337800, 340.412810, 340.412810, 0.000000, X, Y) && !ellipse(24433.771000, 24223.546200, 1174.472034, 690.367220, 61.679600, X, Y) && !ellipse(26869.872955, 28875.171448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.937800, 24480.038000, 1162.544033, 758.373622, 57.734300, X, Y)
[Mon Jun 10 20:01:05 2013] Writing fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23.gif
[Mon Jun 10 20:21:35 2013] Mean detx,y = (-1730.28, 1975.04) 
[Mon Jun 10 20:21:38 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 20:21:56 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 20:21:56 2013] Setting source spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun 10 20:21:56 2013] Setting bgd. spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jun 10 20:47:40 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 20:47:40 2013] rmf not generated due to insufficient counts
[Mon Jun 10 21:40:20 2013] Updating aperture counts using extracted products
[Mon Jun 10 21:40:20 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 401.00
[Mon Jun 10 21:40:20 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_bgd.pi.gz = 1577.00
[Mon Jun 10 21:40:20 2013] Got source and background scale factors 1043108.000000, 7925526.000000
[Mon Jun 10 21:40:20 2013] User source parameters:
  Position = (307.9, 303.2) = 3 37 36.65 -25 20 52.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 193.4 +/- 21.0
  Background aperture counts = 207.6
  Rate = 0.007 +/- 0.0007

[Mon Jun 10 21:40:20 2013] Updating counts from extracted products
[Mon Jun 10 21:40:20 2013] Set source signif. to 193.45/14.41 = 13.43
[Mon Jun 10 21:40:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 21:40:24 2013] Using photon index=1.80, rate=0.00675, arf fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23.arf
[Mon Jun 10 21:40:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 21:40:24 2013] Updating source flux to 2.2e-14
[Mon Jun 10 21:40:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 21:40:45 2013] xmm0107860401/analysis//spectral/fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete