[Mon Jun 10 16:36:22 2013] Detection parameters:
  Position = (305.1, 272.3) = 3 37 37.58 -25 23 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1016.6 +/- 90.8
  Background counts = 148.5
  Rate = 0.02 +/- 0.002

[Mon Jun 10 16:36:23 2013] Off-axis axis estimate = 1.95'
[Mon Jun 10 16:40:00 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 16:40:00 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Mon Jun 10 16:40:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.618
[Mon Jun 10 16:40:00 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.41"
[Mon Jun 10 17:30:52 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Jun 10 17:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2.csv
[Mon Jun 10 17:30:52 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Jun 10 17:30:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2.csv
[Mon Jun 10 17:30:52 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 10 17:30:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Jun 10 17:30:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Jun 10 17:30:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:24:42 2013] Spatial fit model total counts = 1207.040000, observed total counts = 626.000000
[Mon Jun 10 18:24:42 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 18:24:42 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:24:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:24:42 2013] Assessing source extent using major
[Mon Jun 10 18:24:42 2013] Source does appear to be extended
[Mon Jun 10 18:24:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 18:25:00 2013] Using EEF radius (= 7.41 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:25:00 2013] Initial guess for spatial extent in simple fitting = 7.41"
[Mon Jun 10 18:25:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.618
[Mon Jun 10 18:25:00 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 7.41"
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2.csv
[Mon Jun 10 19:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 10 19:09:53 2013] fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 10 19:09:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Jun 10 19:09:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 20:00:45 2013] Spatial fit model total counts = 1191.060000, observed total counts = 626.000000
[Mon Jun 10 20:00:45 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 20:00:45 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.308962 pixels away
[Mon Jun 10 20:00:45 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 20:00:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 20:00:45 2013] Assessing source extent using major
[Mon Jun 10 20:00:45 2013] Source does appear to be extended
[Mon Jun 10 20:00:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 20:01:04 2013] Counts = 1016.619263, rescaling region sizes by 2.000000
[Mon Jun 10 20:01:04 2013] XMMSAS src. selection expression = ellipse(26491.029480, 23641.960022, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 20:01:04 2013] Writing source region out to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 10 20:01:04 2013] Extracting stamp from image fullrun_pn_xmm0107860401_pi300-10000_cl_sm2.00.img.gz, (230, 197) - (380, 347)
[Mon Jun 10 20:01:04 2013] XMMSAS bgd. selection expression = annulus(26491.029480, 23641.960022, 4350.000000, 8700.000000, X, Y) && !ellipse(27206.241272, 29683.017212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28923.023041, 28545.727448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29891.450287, 21034.742493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29035.545837, 29239.709625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22232.168671, 28725.873840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25523.315080, 28568.928800, 341.984010, 341.984010, 0.000000, X, Y) && !ellipse(25278.382000, 28390.854000, 1206.680035, 463.702413, 144.639000, X, Y) && !ellipse(34343.153839, 22675.832031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34775.594391, 27349.533203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25378.997000, 26965.988200, 597.730417, 417.311212, 18.159530, X, Y) && !ellipse(26741.191650, 26328.042542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25089.251600, 24764.337800, 340.412810, 340.412810, 0.000000, X, Y) && !ellipse(24433.771000, 24223.546200, 1174.472034, 690.367220, 61.679600, X, Y) && !ellipse(18969.273071, 23718.902771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27179.093597, 15501.632233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28995.659332, 14207.436874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19233.394058, 31825.092194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34099.372800, 31845.664400, 1579.648045, 397.932811, 50.801272, X, Y) && !ellipse(31322.296800, 29809.848800, 341.472010, 341.472010, 0.000000, X, Y) && !ellipse(26869.872955, 28875.171448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19157.707400, 25866.088800, 372.609611, 372.609611, 0.000000, X, Y) && !ellipse(20044.265228, 25604.576263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24331.937800, 24480.038000, 1162.544033, 758.373622, 57.734300, X, Y) && !ellipse(19439.134933, 24825.104797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20173.729800, 21668.414800, 410.068812, 410.068812, 0.000000, X, Y) && !ellipse(22732.384155, 20443.739609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27885.491000, 19814.081200, 414.004892, 414.004892, 0.000000, X, Y)
[Mon Jun 10 20:01:04 2013] Writing fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2.gif
[Mon Jun 10 20:03:02 2013] Mean detx,y = (-1838.25, -690.09) 
[Mon Jun 10 20:03:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 20:05:18 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 20:05:18 2013] Setting source spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 10 20:05:18 2013] Setting bgd. spectrum file to fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 10 20:33:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 20:33:51 2013] rmf not generated due to insufficient counts
[Mon Jun 10 21:40:15 2013] Updating aperture counts using extracted products
[Mon Jun 10 21:40:15 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 1180.00
[Mon Jun 10 21:40:15 2013] Total counts from fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_bgd.pi.gz = 24259.00
[Mon Jun 10 21:40:15 2013] Got source and background scale factors 3883583.000000, 134774159.000000
[Mon Jun 10 21:40:15 2013] User source parameters:
  Position = (305.1, 272.3) = 3 37 37.58 -25 23 24.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 481.0 +/- 35.4
  Background aperture counts = 699.0
  Rate = 0.02 +/- 0.001

[Mon Jun 10 21:40:15 2013] Updating counts from extracted products
[Mon Jun 10 21:40:15 2013] Set source signif. to 480.97/26.44 = 18.19
[Mon Jun 10 21:40:24 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 21:40:24 2013] Using photon index=1.80, rate=0.0168, arf fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2.arf
[Mon Jun 10 21:40:24 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 21:40:24 2013] Updating source flux to 6.8e-14
[Mon Jun 10 21:40:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 21:40:45 2013] xmm0107860401/analysis//spectral/fullrun_pn_xmm0107860401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete