[Mon Jun 10 16:37:08 2013] Detection parameters:
  Position = (122.7, 188.8) = 3 38 36.14 -25 29 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1089.3 +/- 42.1
  Background counts = 73.1
  Rate = 0.03 +/- 0.001

[Mon Jun 10 16:37:09 2013] Off-axis axis estimate = 15.01'
[Mon Jun 10 18:00:50 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 18:00:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 18:00:50 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Mon Jun 10 18:00:50 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.021
[Mon Jun 10 18:00:50 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.93"
[Mon Jun 10 18:24:33 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jun 10 18:24:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 18:24:33 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jun 10 18:24:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1.csv
[Mon Jun 10 18:24:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:24:33 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jun 10 18:24:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 18:24:33 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jun 10 18:24:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jun 10 18:24:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107860401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 18:24:50 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 18.458755 pixels away
[Mon Jun 10 18:24:50 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 18:24:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 18:24:50 2013] Assessing source extent using major
[Mon Jun 10 18:24:50 2013] Source does appear to be extended
[Mon Jun 10 18:24:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 19:39:13 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 10 19:39:13 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 10 19:39:13 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Mon Jun 10 19:39:13 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.021
[Mon Jun 10 19:39:13 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.93"
[Mon Jun 10 20:00:34 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jun 10 20:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 10 20:00:34 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jun 10 20:00:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1.csv
[Mon Jun 10 20:00:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 20:00:35 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jun 10 20:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 20:00:35 2013] fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jun 10 20:00:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jun 10 20:00:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107860401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 10 20:00:53 2013] Spatial fit model total counts = 1006.940000, observed total counts = 846.000000
[Mon Jun 10 20:00:53 2013] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 10 20:00:53 2013] Vigneting correction estimate = 1.000000
[Mon Jun 10 20:00:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 10 20:00:53 2013] Assessing source extent using major
[Mon Jun 10 20:00:53 2013] Source does appear to be extended
[Mon Jun 10 20:00:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 10 21:17:38 2013] Counts = 1089.276611, rescaling region sizes by 2.000000
[Mon Jun 10 21:17:38 2013] XMMSAS src. selection expression = ellipse(10630.738052, 16380.790756, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 10 21:17:38 2013] Writing source region out to fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_src.reg
[Mon Jun 10 21:17:38 2013] Extracting stamp from image fullrun_mos2_xmm0107860401_pi300-10000_cl_sm2.00.img.gz, (48, 114) - (198, 264)
[Mon Jun 10 21:17:38 2013] XMMSAS bgd. selection expression = annulus(10630.738052, 16380.790756, 4350.000000, 8700.000000, X, Y) && !ellipse(12959.014221, 22590.913574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12845.162582, 25359.384308, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15246.454712, 11530.851395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18963.048355, 23691.712616, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 10 21:17:38 2013] Writing fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1.gif
[Mon Jun 10 21:17:42 2013] Mean detx,y = (-12353.09, 10074.66) 
[Mon Jun 10 21:17:43 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 10 21:19:04 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 10 21:19:04 2013] Setting source spectrum file to fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jun 10 21:19:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jun 10 21:23:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 10 21:23:52 2013] rmf not generated due to insufficient counts
[Mon Jun 10 21:40:29 2013] Updating aperture counts using extracted products
[Mon Jun 10 21:40:29 2013] Total counts from fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 896.00
[Mon Jun 10 21:40:29 2013] Total counts from fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 6773.00
[Mon Jun 10 21:40:29 2013] Got source and background scale factors 4128386.000000, 75500491.000000
[Mon Jun 10 21:40:29 2013] User source parameters:
  Position = (122.7, 188.8) = 3 38 36.14 -25 29 8.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 525.7 +/- 30.9
  Background aperture counts = 370.3
  Rate = 0.02 +/- 0.001

[Mon Jun 10 21:40:29 2013] Updating counts from extracted products
[Mon Jun 10 21:40:29 2013] Set source signif. to 525.65/19.24 = 27.31
[Mon Jun 10 21:40:33 2013] Calculating source flux in energy range 0.30-8.00
[Mon Jun 10 21:40:33 2013] Using photon index=1.80, rate=0.0205, arf fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1.arf
[Mon Jun 10 21:40:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jun 10 21:40:33 2013] Updating source flux to 5.3e-13
[Mon Jun 10 21:40:37 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jun 10 21:40:40 2013] xmm0107860401/analysis//spectral/fullrun_mos2_xmm0107860401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete