[Tue Jul  2 19:45:39 2013] Detection parameters:
  Position = (286.9, 278.6) = 14 42 13.18 35 26 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.1 +/- 18.4
  Background counts = 79.3
  Rate = 0.005 +/- 0.001

[Tue Jul  2 19:45:39 2013] Off-axis axis estimate = 1.66'
[Tue Jul  2 20:05:55 2013] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Tue Jul  2 20:05:55 2013] Initial guess for spatial extent in simple fitting = 7.26"
[Tue Jul  2 20:05:55 2013] source mask rpix=1.7, npix_max = 18, mask sum = 14, frac = 0.744
[Tue Jul  2 20:05:55 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 7.26"
[Tue Jul  2 20:20:06 2013] fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Jul  2 20:20:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10.csv
[Tue Jul  2 20:20:06 2013] fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Jul  2 20:20:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10.csv
[Tue Jul  2 20:20:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 20:20:06 2013] fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Jul  2 20:20:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jul  2 20:20:06 2013] fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Jul  2 20:20:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue Jul  2 20:20:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107660201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul  2 20:20:11 2013] Source 4 is offset by -5.299520 and 2.381889 pixels which is larger than
2 X fitted extent = 2.712727 x 2.712727, not incorporating fit results
[Tue Jul  2 20:20:11 2013] Vigneting correction estimate = 1.000000
[Tue Jul  2 20:20:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul  2 20:20:11 2013] Assessing source extent using major
[Tue Jul  2 20:20:11 2013] Source does appear to be extended
[Tue Jul  2 20:20:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul  2 20:20:11 2013] Deleting source due to low Poisson probability 0.9