[Wed Sep  5 11:49:02 2012] Detection parameters:
  Position = (295.3, 277.2) = 11 6 47.75 72 34 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142917.7 +/- 431.8
  Background counts = 118.8
  Rate = 1 +/- 0.003

[Wed Sep  5 11:49:04 2012] Off-axis axis estimate = 1.56'
[Wed Sep  5 13:41:34 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 13:41:34 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Sep  5 13:41:34 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.860
[Wed Sep  5 13:41:34 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Wed Sep  5 15:24:50 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep  5 15:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 15:24:50 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep  5 15:24:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 15:24:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 15:24:51 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep  5 15:24:51 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep  5 15:24:51 2012] Fit fullrun_mos2_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 15:25:11 2012] Spatial fit model total counts = 120605.000000, observed total counts = 119484.000000
[Wed Sep  5 15:25:11 2012] Offset between fit and detection position for source 1 = 0.132279 pixels
[Wed Sep  5 15:25:11 2012] 121075.300000 total counts/ 25599.400000 bgd. counts: snr = 596.731368
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.132279 pixels
  Position = (295.3, 277.3) = 11 6 47.75 72 34 8.0
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 95475.9 +/- 348.0
  Background counts = 25599.4
  Rate = 0.8 +/- 0.003
[Wed Sep  5 15:25:11 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 15:25:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 15:25:11 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 15:25:11 2012] Source does appear to be extended
[Wed Sep  5 15:25:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 16:05:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 16:05:13 2012] Initial guess for spatial extent in simple fitting = 5.59"
[Wed Sep  5 16:05:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.706
[Wed Sep  5 16:05:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.59"
[Wed Sep  5 17:27:01 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep  5 17:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 17:27:01 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep  5 17:27:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 17:27:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 17:27:02 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep  5 17:27:02 2012] fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep  5 17:27:02 2012] Fit fullrun_mos2_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep  5 17:27:17 2012] Spatial fit model total counts = 120525.000000, observed total counts = 119484.000000
[Wed Sep  5 17:27:17 2012] Offset between fit and detection position for source 1 = 0.000067 pixels
[Wed Sep  5 17:27:17 2012] 120996.400000 total counts/ 25600.000000 bgd. counts: snr = 596.227500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000067 pixels
  Position = (295.3, 277.3) = 11 6 47.75 72 34 8.0
  Extent = 5.6 (5.6-5.6)", rotation angle = 0
  Source counts = 95396.4 +/- 347.8
  Background counts = 25600.0
  Rate = 0.8 +/- 0.003
[Wed Sep  5 17:27:17 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 17:27:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 17:27:17 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 17:27:17 2012] Source does appear to be extended
[Wed Sep  5 17:27:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 19:21:49 2012] Counts = 95396.400000, rescaling region sizes by 3.000000
[Wed Sep  5 19:21:49 2012] XMMSAS src. selection expression = ellipse(25644.779400, 24075.661600, 1008.199829, 1008.199829, 0.000000, X, Y)
[Wed Sep  5 19:21:49 2012] Writing source region out to fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep  5 19:21:49 2012] Extracting stamp from image fullrun_mos2_xmm0107460701_pi300-10000_cl_sm2.00.img.gz, (237, 219) - (353, 335)
[Wed Sep  5 19:21:49 2012] XMMSAS bgd. selection expression = annulus(25644.779400, 24075.661600, 5040.999145, 10081.998290, X, Y) && !ellipse(16047.106600, 14590.891800, 440.942413, 440.942413, 0.000000, X, Y) && !ellipse(33013.395691, 29104.422607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15108.371948, 24501.207153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13985.262000, 13435.708000, 3038.336087, 3038.336087, 0.000000, X, Y) && !ellipse(19885.386948, 30928.520660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19866.406143, 20352.287125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24820.315125, 33336.879150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25263.614746, 23169.601105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24716.861908, 23778.922363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34577.221222, 32647.506104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27205.787262, 14757.719574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17481.846008, 34431.133545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23557.166351, 34582.093201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.294922, 26266.198944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16068.199554, 34215.096466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18354.354431, 20348.432788, 651.634813, 446.270162, 338.421980, X, Y) && !ellipse(34494.785217, 17366.390732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24402.474579, 24639.680206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26422.882843, 20849.465256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15009.230000, 14361.278000, 2138.888062, 2138.888062, 0.000000, X, Y) && !ellipse(35067.655579, 15910.547897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17058.192276, 15740.395035, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31259.966553, 33969.028351, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 19:21:49 2012] Writing fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1.gif
[Wed Sep  5 19:22:05 2012] Mean detx,y = (22.31, -203.15) 
[Wed Sep  5 19:22:07 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 19:24:36 2012] grppha failed
[Wed Sep  5 19:24:36 2012] Setting source spectrum file to fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 19:24:36 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep  5 19:42:48 2012] Updating aperture counts using extracted products
[Wed Sep  5 19:42:48 2012] Error reading totcts from fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 19:42:49 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 19:42:51 2012] Source 1 has no response, skipping
[Wed Sep  5 19:42:52 2012] xmm0107460701/analysis//spectral/fullrun_mos2_xmm0107460701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete