[Wed Sep  5 11:48:28 2012] Detection parameters:
  Position = (295.4, 277.1) = 11 6 47.65 72 34 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140555.9 +/- 442.8
  Background counts = 154.7
  Rate = 1 +/- 0.004

[Wed Sep  5 11:48:28 2012] Off-axis axis estimate = 1.56'
[Wed Sep  5 12:54:39 2012] Using EEF radius (= 7.21 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 12:54:39 2012] Initial guess for spatial extent in simple fitting = 7.21"
[Wed Sep  5 12:54:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.074
[Wed Sep  5 12:54:39 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.21"
[Wed Sep  5 13:41:33 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1.ximg exists
[Wed Sep  5 13:41:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 13:41:33 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Sep  5 13:41:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1.csv
[Wed Sep  5 13:41:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 13:41:34 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Sep  5 13:41:34 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Sep  5 13:41:34 2012] Fit fullrun_mos1_xmm0107460701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Sep  5 15:25:01 2012] Spatial fit model total counts = 116002.000000, observed total counts = 116042.000000
[Wed Sep  5 15:25:01 2012] Offset between fit and detection position for source 1 = 0.162616 pixels
[Wed Sep  5 15:25:01 2012] 116299.500000 total counts/ 25600.000000 bgd. counts: snr = 566.871875
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.162616 pixels
  Position = (295.3, 277.2) = 11 6 47.78 72 34 7.7
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 90699.5 +/- 341.0
  Background counts = 25600.0
  Rate = 0.7 +/- 0.003
[Wed Sep  5 15:25:01 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 15:25:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 15:25:01 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 15:25:01 2012] Source does appear to be extended
[Wed Sep  5 15:25:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 15:40:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Sep  5 15:40:13 2012] Initial guess for spatial extent in simple fitting = 5.46"
[Wed Sep  5 15:40:13 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.973
[Wed Sep  5 15:40:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.46"
[Wed Sep  5 16:05:13 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1.ximg exists
[Wed Sep  5 16:05:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 16:05:13 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Sep  5 16:05:13 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1.csv
[Wed Sep  5 16:05:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 16:05:13 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Sep  5 16:05:13 2012] fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Sep  5 16:05:13 2012] Fit fullrun_mos1_xmm0107460701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Sep  5 17:27:09 2012] Spatial fit model total counts = 116002.000000, observed total counts = 116042.000000
[Wed Sep  5 17:27:09 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Wed Sep  5 17:27:09 2012] 116299.400000 total counts/ 25600.000000 bgd. counts: snr = 566.871250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (295.3, 277.2) = 11 6 47.78 72 34 7.7
  Extent = 5.5 (5.4-5.5)", rotation angle = 0
  Source counts = 90699.4 +/- 341.0
  Background counts = 25600.0
  Rate = 0.7 +/- 0.003
[Wed Sep  5 17:27:09 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 17:27:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 17:27:09 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 17:27:09 2012] Source does appear to be extended
[Wed Sep  5 17:27:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 19:09:51 2012] Counts = 90699.400000, rescaling region sizes by 3.000000
[Wed Sep  5 19:09:51 2012] XMMSAS src. selection expression = ellipse(25642.410800, 24069.475800, 983.473228, 983.473228, 0.000000, X, Y)
[Wed Sep  5 19:09:51 2012] Writing source region out to fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1_src.reg
[Wed Sep  5 19:09:51 2012] Extracting stamp from image fullrun_mos1_xmm0107460701_pi300-10000_cl_sm2.00.img.gz, (239, 221) - (352, 334)
[Wed Sep  5 19:09:51 2012] XMMSAS bgd. selection expression = annulus(25642.410800, 24069.475800, 4917.366141, 9834.732283, X, Y) && !ellipse(16045.731369, 14572.393219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33032.811920, 29100.532990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15092.854630, 24499.821228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19852.691589, 20277.556015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34582.828644, 33649.415924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19898.255875, 30931.457123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34587.936920, 32652.524109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16002.352173, 34159.954163, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 19:09:51 2012] Writing fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1.gif
[Wed Sep  5 19:10:20 2012] Mean detx,y = (21.28, -175.61) 
[Wed Sep  5 19:10:23 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 19:12:27 2012] grppha failed
[Wed Sep  5 19:12:27 2012] Setting source spectrum file to fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 19:12:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Sep  5 19:42:48 2012] Updating aperture counts using extracted products
[Wed Sep  5 19:42:48 2012] Error reading totcts from fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1_src.pi.gz
[Wed Sep  5 19:42:48 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 19:42:50 2012] Source 1 has no response, skipping
[Wed Sep  5 19:42:51 2012] xmm0107460701/analysis//spectral/fullrun_mos1_xmm0107460701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete