[Mon May 13 00:56:25 2013] Detection parameters:
  Position = (298.3, 324.3) = 11 6 35.30 72 34 42.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.0 +/- 33.0
  Background counts = 208.9
  Rate = 0.003 +/- 0.0004

[Mon May 13 00:56:26 2013] Off-axis axis estimate = 1.87'
[Mon May 13 00:56:41 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:56:41 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Mon May 13 00:56:41 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.728
[Mon May 13 00:56:41 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 7.36"
[Mon May 13 00:56:42 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15.ximg exists
[Mon May 13 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15.csv
[Mon May 13 00:56:42 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May 13 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15.csv
[Mon May 13 00:56:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:56:43 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May 13 00:56:43 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May 13 00:56:43 2013] Fit fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Mon May 13 00:56:53 2013] Warning, spatial fit 15 centroid is now closest to src. 23
[Mon May 13 00:56:53 2013] Source 21 is offset by 2.975681 and 8.963871 pixels which is larger than
2 X fitted extent = 4.076409 x 4.076409, not incorporating fit results
[Mon May 13 00:56:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:56:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:56:53 2013] Assessing source extent using major
[Mon May 13 00:56:53 2013] Source does appear to be extended
[Mon May 13 00:56:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:56:53 2013] Source is confused with source 23
[Mon May 13 00:57:00 2013] Using EEF radius (= 7.36 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:57:00 2013] Initial guess for spatial extent in simple fitting = 7.36"
[Mon May 13 00:57:00 2013] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.728
[Mon May 13 00:57:00 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.36"
[Mon May 13 00:57:01 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14.ximg exists
[Mon May 13 00:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14.csv
[Mon May 13 00:57:01 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14_1.ximg exists
[Mon May 13 00:57:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14.csv
[Mon May 13 00:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:57:02 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Mon May 13 00:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 13 00:57:02 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Mon May 13 00:57:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14.csv
[Mon May 13 00:57:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:57:11 2013] Spatial fit model total counts = 8378.480000, observed total counts = 10196.000000
[Mon May 13 00:57:11 2013] Poor agreement between spatial fit and data for source 21
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 13 00:57:11 2013] Source 21 is offset by -1.453114 and -7.505095 pixels which is larger than
2 X fitted extent = 6.772368 x 6.772368, not incorporating fit results
[Mon May 13 00:57:11 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:57:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:57:11 2013] Assessing source extent using major
[Mon May 13 00:57:11 2013] Source does appear to be extended
[Mon May 13 00:57:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 01:03:42 2013] XMMSAS src. selection expression = ellipse(25901.780243, 28162.752747, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 01:03:42 2013] Writing source region out to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_src.reg
[Mon May 13 01:03:42 2013] Extracting stamp from image fullrun_mos2_xmm0107460601_pi300-10000_cl_sm2.00.img.gz, (261, 287) - (336, 362)
[Mon May 13 01:03:42 2013] XMMSAS bgd. selection expression = annulus(25901.780243, 28162.752747, 1087.500000, 2175.000000, X, Y) && !ellipse(24833.853294, 27466.083800, 1341.866439, 1341.866439, 0.000000, X, Y) && !ellipse(24558.844000, 29062.210000, 1208.680035, 1208.680035, 0.000000, X, Y) && !ellipse(25326.777893, 28320.318115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26861.156494, 27187.117096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24956.677429, 28441.209564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27209.284000, 28034.671600, 1178.280034, 1178.280034, 0.000000, X, Y) && !ellipse(24575.962158, 25801.305969, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 01:03:42 2013] Writing fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21.gif
[Mon May 13 01:18:07 2013] Mean detx,y = (-823.35, -746.89) 
[Mon May 13 01:18:08 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 01:18:17 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 01:18:17 2013] Setting source spectrum file to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 13 01:18:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon May 13 02:11:27 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 02:11:27 2013] rmf not generated due to insufficient counts
[Mon May 13 02:27:26 2013] Updating aperture counts using extracted products
[Mon May 13 02:27:26 2013] Total counts from fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_src_b10.pi.gz = 2403.00
[Mon May 13 02:27:26 2013] Total counts from fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_bgd.pi.gz = 1772.00
[Mon May 13 02:27:26 2013] Got source and background scale factors 1169168.000000, 2694940.000000
[Mon May 13 02:27:26 2013] User source parameters:
  Position = (298.3, 324.3) = 11 6 35.30 72 34 42.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1634.2 +/- 50.0
  Background aperture counts = 768.8
  Rate = 0.03 +/- 0.0008

[Mon May 13 02:27:26 2013] Updating counts from extracted products
[Mon May 13 02:27:26 2013] Set source signif. to 1634.24/27.73 = 58.94
[Mon May 13 02:27:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 02:27:29 2013] Using photon index=1.80, rate=0.0258, arf fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21.arf
[Mon May 13 02:27:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 02:27:29 2013] Updating source flux to 2.9e-13
[Mon May 13 02:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 02:27:37 2013] xmm0107460601/analysis//spectral/fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete