[Mon May 13 00:56:25 2013] Detection parameters:
  Position = (293.9, 485.8) = 11 6 39.54 72 46 25.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 266.7 +/- 27.1
  Background counts = 165.8
  Rate = 0.003 +/- 0.0003

[Mon May 13 00:56:26 2013] Off-axis axis estimate = 13.59'
[Mon May 13 00:56:41 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:56:41 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May 13 00:56:41 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Mon May 13 00:56:41 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Mon May 13 00:56:41 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 13.22"
[Mon May 13 00:56:42 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14.ximg exists
[Mon May 13 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14.csv
[Mon May 13 00:56:42 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon May 13 00:56:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14.csv
[Mon May 13 00:56:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:56:43 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon May 13 00:56:43 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon May 13 00:56:43 2013] Fit fullrun_mos2_xmm0107460601_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon May 13 00:56:53 2013] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.060105 pixels away
[Mon May 13 00:56:53 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:56:53 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:56:53 2013] Assessing source extent using major
[Mon May 13 00:56:53 2013] Source does appear to be extended
[Mon May 13 00:56:53 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 00:57:00 2013] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Mon May 13 00:57:00 2013] Initial guess for spatial extent in simple fitting = 13.22"
[Mon May 13 00:57:00 2013] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Mon May 13 00:57:00 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.22"
[Mon May 13 00:57:01 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13.ximg exists
[Mon May 13 00:57:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13.csv
[Mon May 13 00:57:01 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon May 13 00:57:01 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13.csv
[Mon May 13 00:57:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 13 00:57:02 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon May 13 00:57:02 2013] fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon May 13 00:57:02 2013] Fit fullrun_mos2_xmm0107460601_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon May 13 00:57:11 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 17.385580 pixels away
[Mon May 13 00:57:11 2013] Vigneting correction estimate = 1.000000
[Mon May 13 00:57:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 13 00:57:11 2013] Assessing source extent using major
[Mon May 13 00:57:11 2013] Source does appear to be extended
[Mon May 13 00:57:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 13 01:03:42 2013] XMMSAS src. selection expression = ellipse(25524.967865, 42216.908722, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 13 01:03:42 2013] Writing source region out to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_src.reg
[Mon May 13 01:03:42 2013] Extracting stamp from image fullrun_mos2_xmm0107460601_pi300-10000_cl_sm2.00.img.gz, (256, 448) - (331, 523)
[Mon May 13 01:03:42 2013] XMMSAS bgd. selection expression = annulus(25524.967865, 42216.908722, 1087.500000, 2175.000000, X, Y) && !ellipse(27663.824951, 39608.655731, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 13 01:03:42 2013] Writing fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10.gif
[Mon May 13 01:17:49 2013] Mean detx,y = (-14015.52, 4321.66) 
[Mon May 13 01:17:50 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May 13 01:18:00 2013] Binned source spectrum to 10 counts/bin
[Mon May 13 01:18:00 2013] Setting source spectrum file to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 13 01:18:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 13 02:11:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 13 02:11:20 2013] rmf not generated due to insufficient counts
[Mon May 13 02:27:26 2013] Updating aperture counts using extracted products
[Mon May 13 02:27:26 2013] Total counts from fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 661.00
[Mon May 13 02:27:26 2013] Total counts from fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_bgd.pi.gz = 4124.00
[Mon May 13 02:27:26 2013] Got source and background scale factors 1332760.000000, 10863644.000000
[Mon May 13 02:27:26 2013] User source parameters:
  Position = (293.9, 485.8) = 11 6 39.54 72 46 25.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 155.1 +/- 26.7
  Background aperture counts = 505.9
  Rate = 0.002 +/- 0.0004

[Mon May 13 02:27:26 2013] Updating counts from extracted products
[Mon May 13 02:27:26 2013] Set source signif. to 155.06/22.49 = 6.89
[Mon May 13 02:27:29 2013] Calculating source flux in energy range 0.30-8.00
[Mon May 13 02:27:29 2013] Using photon index=1.80, rate=0.00245, arf fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10.arf
[Mon May 13 02:27:29 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 13 02:27:29 2013] Updating source flux to 5.8e-14
[Mon May 13 02:27:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 13 02:27:37 2013] xmm0107460601/analysis//spectral/fullrun_mos2_xmm0107460601_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete