[Tue Mar 13 12:07:13 2012] Detection parameters:
  Position = (297.9, 193.5) = 3 18 22.17 -66 36 2.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 192.5 +/- 16.2
  Background counts = 0.7
  Rate = 0.1 +/- 0.01

[Tue Mar 13 12:07:13 2012] Off-axis axis estimate = 7.61'
[Tue Mar 13 12:07:40 2012] Using EEF radius (= 10.23 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:07:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 13 12:07:40 2012] Initial guess for spatial extent in simple fitting = 10.23"
[Tue Mar 13 12:07:40 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.891
[Tue Mar 13 12:07:40 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.23"
[Tue Mar 13 12:07:40 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 13 12:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 12:07:40 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 13 12:07:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 12:07:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:07:40 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 12:07:40 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 12:07:40 2012] Fit fullrun_mos1_xmm0106860101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 13 12:07:57 2012] Spatial fit model total counts = 175.853000, observed total counts = 177.000000
[Tue Mar 13 12:07:57 2012] Offset between fit and detection position for source 4 = 0.308797 pixels
[Tue Mar 13 12:07:57 2012] 173.957400 total counts/ 31.979400 bgd. counts: snr = 25.106484
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.308797 pixels
  Position = (297.9, 193.8) = 3 18 22.21 -66 36 2.5
  Extent = 5.6 (4.9-6.2)", rotation angle = 0
  Source counts = 142.0 +/- 13.2
  Background counts = 32.0
  Rate = 0.06 +/- 0.006
[Tue Mar 13 12:07:57 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:07:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:07:57 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:07:57 2012] Source does appear to be extended
[Tue Mar 13 12:07:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:08:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 12:08:15 2012] Initial guess for spatial extent in simple fitting = 5.56"
[Tue Mar 13 12:08:15 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.265
[Tue Mar 13 12:08:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.56"
[Tue Mar 13 12:08:16 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 13 12:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 12:08:16 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 13 12:08:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 12:08:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 12:08:16 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 13 12:08:16 2012] fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 13 12:08:16 2012] Fit fullrun_mos1_xmm0106860101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Tue Mar 13 12:08:31 2012] Spatial fit model total counts = 176.000000, observed total counts = 176.000000
[Tue Mar 13 12:08:31 2012] Offset between fit and detection position for source 4 = 0.011472 pixels
[Tue Mar 13 12:08:31 2012] 174.522000 total counts/ 31.893000 bgd. counts: snr = 25.255743
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.011472 pixels
  Position = (297.9, 193.8) = 3 18 22.22 -66 36 2.5
  Extent = 5.6 (4.9-6.2)", rotation angle = 0
  Source counts = 142.6 +/- 13.2
  Background counts = 31.9
  Rate = 0.06 +/- 0.006
[Tue Mar 13 12:08:31 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 12:08:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 12:08:31 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 12:08:31 2012] Source does appear to be extended
[Tue Mar 13 12:08:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 12:08:58 2012] XMMSAS src. selection expression = ellipse(25865.870860, 16815.580760, 333.285010, 333.285010, 0.000000, X, Y)
[Tue Mar 13 12:08:58 2012] Not overwriting source region fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src.reg
[Tue Mar 13 12:08:58 2012] Extracting stamp from image fullrun_mos1_xmm0106860101_pi300-10000_cl_sm2.00.img.gz, (279, 175) - (317, 213)
[Tue Mar 13 12:08:58 2012] XMMSAS bgd. selection expression = annulus(25865.870860, 16815.580760, 555.475016, 1110.950032, X, Y)
[Tue Mar 13 12:08:58 2012] Writing fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4.gif
[Tue Mar 13 12:08:58 2012] ../../xmm0106860101/products/events/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0106860101/products/events/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Mar 13 12:08:58 2012] Mean detx,y = (2731.63, 6737.58) 
[Tue Mar 13 12:08:58 2012] ../../xmm0106860101/products/images/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0106860101/products/images/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Mar 13 12:08:58 2012] ../../xmm0106860101/products/spectra/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0106860101/products/spectra/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Mar 13 12:08:58 2012] Setting source spectrum file to fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 12:08:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Mar 13 12:08:58 2012] ../../xmm0106860101/products/lightcurves/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0106860101/products/lightcurves/fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Mar 13 12:08:59 2012] fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Tue Mar 13 12:08:59 2012] fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Tue Mar 13 12:10:12 2012] Updating aperture counts using extracted products
[Tue Mar 13 12:10:12 2012] Error reading totcts from fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Mar 13 12:10:12 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 12:10:12 2012] Using photon index=1.80, rate=0.0614, arf fullrun_mos1_xmm0106860101_pi300-10000_pass1_cl_src4.arf
[Tue Mar 13 12:10:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 12:10:12 2012] Updating source flux to 9.8e-13