[Fri May 10 01:59:03 2013] Detection parameters:
  Position = (342.9, 320.7) = 22 15 23.56 -17 43 20.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2142.7 +/- 58.7
  Background counts = 192.8
  Rate = 0.02 +/- 0.0007

[Fri May 10 01:59:05 2013] Off-axis axis estimate = 3.61'
[Fri May 10 02:04:57 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Fri May 10 02:04:57 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Fri May 10 02:04:57 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Fri May 10 02:04:57 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.23"
[Fri May 10 04:10:56 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 10 04:10:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8.csv
[Fri May 10 04:10:56 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 10 04:10:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8.csv
[Fri May 10 04:10:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 04:10:57 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 10 04:10:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 04:10:57 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 10 04:10:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 10 04:10:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:32:48 2013] Spatial fit model total counts = 2936.120000, observed total counts = 2662.000000
[Fri May 10 06:32:48 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 06:32:48 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:32:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:32:48 2013] Assessing source extent using major
[Fri May 10 06:32:48 2013] Source does appear to be extended
[Fri May 10 06:32:48 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 06:33:24 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Fri May 10 06:33:24 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Fri May 10 06:33:24 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Fri May 10 06:33:24 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.23"
[Fri May 10 08:03:41 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 10 08:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8.csv
[Fri May 10 08:03:41 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 10 08:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8.csv
[Fri May 10 08:03:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 08:03:42 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 10 08:03:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 08:03:42 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 10 08:03:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 10 08:03:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:04:37 2013] Spatial fit model total counts = 2935.640000, observed total counts = 2662.000000
[Fri May 10 10:04:37 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 10:04:37 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:04:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:04:37 2013] Assessing source extent using major
[Fri May 10 10:04:37 2013] Source does appear to be extended
[Fri May 10 10:04:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 10:05:06 2013] Counts = 2142.692627, rescaling region sizes by 2.000000
[Fri May 10 10:05:06 2013] XMMSAS src. selection expression = ellipse(29788.050171, 27849.692932, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May 10 10:05:06 2013] Writing source region out to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_src.reg
[Fri May 10 10:05:06 2013] Extracting stamp from image fullrun_pn_xmm0106660601_pi300-10000_cl_sm2.00.img.gz, (268, 246) - (418, 396)
[Fri May 10 10:05:06 2013] XMMSAS bgd. selection expression = annulus(29788.050171, 27849.692932, 4350.000000, 8700.000000, X, Y) && !ellipse(38501.154280, 28743.523000, 486.174414, 363.713610, 66.104500, X, Y) && !ellipse(25636.450560, 23972.288200, 468.432813, 401.893612, 69.667000, X, Y) && !ellipse(37486.769592, 18764.280914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38211.319122, 36886.881653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.104736, 36334.266510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33450.063049, 35812.824066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32476.394240, 34824.680000, 569.293616, 244.313607, 27.289800, X, Y) && !ellipse(24644.642880, 34301.252000, 493.980014, 493.980014, 0.000000, X, Y) && !ellipse(25781.077301, 34143.763794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19670.326000, 33971.636000, 1696.424049, 460.648813, 301.802000, X, Y) && !ellipse(22439.396362, 33565.503723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34503.538849, 32248.917175, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38006.660800, 31996.509600, 464.850413, 374.476011, 76.596080, X, Y) && !ellipse(24233.213806, 31827.763153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31150.194366, 31718.824646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35226.235168, 28983.008118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37892.298767, 28934.229919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29047.490814, 28002.327911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22911.882721, 27981.313354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27062.197000, 25196.926600, 397.687211, 305.652009, 55.422400, X, Y) && !ellipse(33552.345398, 24854.339325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26002.650600, 25151.513000, 1082.536031, 1082.536031, 0.000000, X, Y) && !ellipse(31392.136566, 24508.450073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28204.348000, 24676.052000, 1193.688034, 1193.688034, 0.000000, X, Y) && !ellipse(27194.009580, 23754.532600, 372.977611, 372.977611, 0.000000, X, Y) && !ellipse(26800.376000, 23110.754000, 1183.488034, 1183.488034, 0.000000, X, Y) && !ellipse(25194.038280, 20953.333600, 396.908811, 295.318408, 237.712000, X, Y) && !ellipse(25902.162567, 20250.416306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31304.876373, 20212.442749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38313.476700, 20132.752200, 712.244820, 303.352009, 330.444200, X, Y) && !ellipse(26463.269200, 19419.370200, 379.828011, 379.828011, 0.000000, X, Y) && !ellipse(31744.538605, 18963.040390, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 10:05:06 2013] Writing fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8.gif
[Fri May 10 10:16:11 2013] Mean detx,y = (1865.04, -1701.02) 
[Fri May 10 10:16:22 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 10:18:05 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 10:18:05 2013] Setting source spectrum file to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri May 10 10:18:05 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri May 10 11:28:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 11:28:08 2013] rmf not generated due to insufficient counts
[Fri May 10 14:35:26 2013] Updating aperture counts using extracted products
[Fri May 10 14:35:26 2013] Total counts from fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 4369.00
[Fri May 10 14:35:26 2013] Total counts from fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_bgd.pi.gz = 66942.00
[Fri May 10 14:35:26 2013] Got source and background scale factors 4529651.000000, 126217988.000000
[Fri May 10 14:35:26 2013] User source parameters:
  Position = (342.9, 320.7) = 22 15 23.56 -17 43 20.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1966.6 +/- 67.1
  Background aperture counts = 2402.4
  Rate = 0.02 +/- 0.0007

[Fri May 10 14:35:26 2013] Updating counts from extracted products
[Fri May 10 14:35:26 2013] Set source signif. to 1966.62/49.01 = 40.12
[Fri May 10 14:35:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 14:35:38 2013] Using photon index=1.80, rate=0.0211, arf fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8.arf
[Fri May 10 14:35:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 14:35:38 2013] Updating source flux to 5.2e-14
[Fri May 10 14:36:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 14:36:20 2013] xmm0106660601/analysis//spectral/fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete