[Fri May 10 01:59:04 2013] Detection parameters:
  Position = (288.6, 441.5) = 22 15 40.11 -17 34 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.6 +/- 27.7
  Background counts = 126.7
  Rate = 0.002 +/- 0.0003

[Fri May 10 01:59:05 2013] Off-axis axis estimate = 10.40'
[Fri May 10 02:04:57 2013] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Fri May 10 02:04:57 2013] Initial guess for spatial extent in simple fitting = 11.63"
[Fri May 10 02:04:57 2013] source mask rpix=2.7, npix_max = 40, mask sum = 38, frac = 0.944
[Fri May 10 02:04:57 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 11.63"
[Fri May 10 04:10:57 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src18.ximg exists
[Fri May 10 04:10:57 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri May 10 04:10:57 2013] Fit fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_src18 appears to have run properly
[Fri May 10 04:10:58 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri May 10 04:10:58 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri May 10 04:10:58 2013] Fit fullrun_pn_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri May 10 06:32:48 2013] Source 18 is offset by -2.482263 and 1.959139 pixels which is larger than
2 X fitted extent = 1.775848 x 1.371674, not incorporating fit results
[Fri May 10 06:32:48 2013] Spatial fit model total counts = 1067.730000, observed total counts = 971.000000
[Fri May 10 06:32:48 2013] Offset between fit and detection position for source 18 = 0.320948 pixels
[Fri May 10 06:32:48 2013] 1068.264000 total counts/ 927.657000 bgd. counts: snr = 4.616504
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.320948 pixels
  Position = (288.2, 441.6) = 22 15 40.21 -17 34 33.9
  Extent = 10.9 (8.5-14.5)", rotation angle = 352 (346-3) degrees
  Source counts = 140.6 +/- 32.7
  Background counts = 927.7
  Rate = 0.002 +/- 0.0004
[Fri May 10 06:32:48 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:32:48 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:32:48 2013] Assessing source extent using major axis lower bound
[Fri May 10 06:32:48 2013] Source does appear to be extended
[Fri May 10 06:32:48 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.92
[Fri May 10 06:32:48 2013] Source is asymmetric
[Fri May 10 06:33:24 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 10 06:33:24 2013] Initial guess for spatial extent in simple fitting = 6.90"
[Fri May 10 06:33:24 2013] source mask rpix=1.6, npix_max = 17, mask sum = 13, frac = 0.746
[Fri May 10 06:33:24 2013] Giving source the simple spatial ID 18 for pass 1, mean size = 6.90"
[Fri May 10 08:03:41 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18.ximg exists
[Fri May 10 08:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18.csv
[Fri May 10 08:03:41 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18_1.ximg exists
[Fri May 10 08:03:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18.csv
[Fri May 10 08:03:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 08:03:42 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Fri May 10 08:03:42 2013] fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Fri May 10 08:03:42 2013] Fit fullrun_pn_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Fri May 10 10:04:37 2013] Spatial fit model total counts = 1070.880000, observed total counts = 971.000000
[Fri May 10 10:04:37 2013] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 10 10:04:37 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:04:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:04:37 2013] Assessing source extent using major axis lower bound
[Fri May 10 10:04:37 2013] Source does appear to be extended
[Fri May 10 10:04:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.92
[Fri May 10 10:04:37 2013] Source is asymmetric
[Fri May 10 10:05:06 2013] XMMSAS src. selection expression = ellipse(25028.568800, 38367.318200, 653.784019, 174.398405, 352.045900, X, Y)
[Fri May 10 10:05:06 2013] Writing source region out to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_src.reg
[Fri May 10 10:05:06 2013] Extracting stamp from image fullrun_pn_xmm0106660601_pi300-10000_cl_sm2.00.img.gz, (251, 404) - (326, 479)
[Fri May 10 10:05:06 2013] XMMSAS bgd. selection expression = annulus(25028.568800, 38367.318200, 1089.640031, 2179.280063, X, Y) && !ellipse(26050.214966, 39121.362274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27544.667236, 37493.213348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.104736, 36334.266510, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 10:05:06 2013] Writing fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18.gif
[Fri May 10 10:27:04 2013] Mean detx,y = (-6212.17, -9887.48) 
[Fri May 10 10:27:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 10:27:33 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 10:27:34 2013] Setting source spectrum file to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Fri May 10 10:27:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Fri May 10 14:35:28 2013] Updating aperture counts using extracted products
[Fri May 10 14:35:28 2013] Total counts from fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 282.00
[Fri May 10 14:35:28 2013] Total counts from fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3631.00
[Fri May 10 14:35:28 2013] Got source and background scale factors 271379.000000, 7435408.000000
[Fri May 10 14:35:28 2013] User source parameters:
  Position = (288.2, 441.6) = 22 15 40.21 -17 34 33.9
  Extent = 10.9 (8.5-14.5)", rotation angle = 352 (346-3) degrees
  Source aperture counts = 149.5 +/- 17.8
  Background aperture counts = 132.5
  Rate = 0.002 +/- 0.0002

[Fri May 10 14:35:39 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 14:35:39 2013] Using photon index=1.80, rate=0.00151, arf fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18.arf
[Fri May 10 14:35:39 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 14:35:39 2013] Updating source flux to 1.5e-14
[Fri May 10 14:36:07 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Fri May 10 14:36:07 2013] Flag p found in src. 18 procflags, skipping spectral fitting
[Fri May 10 14:36:20 2013] xmm0106660601/analysis//spectral/fullrun_pn_xmm0106660601_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete