[Fri May 10 02:00:06 2013] Detection parameters:
  Position = (146.7, 264.1) = 22 16 23.33 -17 47 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.4 +/- 24.8
  Background counts = 39.8
  Rate = 0.003 +/- 0.0002

[Fri May 10 02:00:08 2013] Off-axis axis estimate = 11.28'
[Fri May 10 05:16:50 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Fri May 10 05:16:50 2013] Initial guess for spatial extent in simple fitting = 12.07"
[Fri May 10 05:16:50 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Fri May 10 05:16:50 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 12.07"
[Fri May 10 06:32:31 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 10 06:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10.csv
[Fri May 10 06:32:31 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 10 06:32:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10.csv
[Fri May 10 06:32:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:32:32 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 10 06:32:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 10 06:32:32 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 10 06:32:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 10 06:32:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:33:07 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.826671 pixels away
[Fri May 10 06:33:07 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:33:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:33:07 2013] Assessing source extent using major
[Fri May 10 06:33:07 2013] Source does appear to be extended
[Fri May 10 06:33:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 08:56:46 2013] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Fri May 10 08:56:46 2013] Initial guess for spatial extent in simple fitting = 12.07"
[Fri May 10 08:56:46 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.979
[Fri May 10 08:56:46 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 12.07"
[Fri May 10 10:04:21 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 10 10:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10.csv
[Fri May 10 10:04:21 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 10 10:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10.csv
[Fri May 10 10:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:04:21 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 10 10:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 10 10:04:21 2013] fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 10 10:04:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri May 10 10:04:21 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:04:50 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.826671 pixels away
[Fri May 10 10:04:50 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:04:50 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:04:50 2013] Assessing source extent using major
[Fri May 10 10:04:50 2013] Source does appear to be extended
[Fri May 10 10:04:50 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 13:26:46 2013] XMMSAS src. selection expression = ellipse(12713.284622, 22930.983002, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 13:26:46 2013] Writing source region out to fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_src.reg
[Fri May 10 13:26:46 2013] Extracting stamp from image fullrun_mos2_xmm0106660601_pi300-10000_cl_sm2.00.img.gz, (109, 227) - (184, 302)
[Fri May 10 13:26:46 2013] XMMSAS bgd. selection expression = annulus(12713.284622, 22930.983002, 1087.500000, 2175.000000, X, Y) && !ellipse(13036.841095, 20392.964828, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 10 13:26:46 2013] Writing fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3.gif
[Fri May 10 13:29:14 2013] Mean detx,y = (12484.80, -9057.18) 
[Fri May 10 13:29:15 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 13:29:25 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 13:29:25 2013] Setting source spectrum file to fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri May 10 13:29:25 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri May 10 14:05:46 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 14:05:46 2013] rmf not generated due to insufficient counts
[Fri May 10 14:35:47 2013] Updating aperture counts using extracted products
[Fri May 10 14:35:47 2013] Total counts from fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_src_b10.pi.gz = 523.00
[Fri May 10 14:35:47 2013] Total counts from fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_bgd.pi.gz = 1110.00
[Fri May 10 14:35:47 2013] Got source and background scale factors 1268542.000000, 6170638.000000
[Fri May 10 14:35:47 2013] User source parameters:
  Position = (146.7, 264.1) = 22 16 23.33 -17 47 24.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 294.8 +/- 23.9
  Background aperture counts = 228.2
  Rate = 0.003 +/- 0.0002

[Fri May 10 14:35:47 2013] Updating counts from extracted products
[Fri May 10 14:35:47 2013] Set source signif. to 294.81/15.11 = 19.52
[Fri May 10 14:35:51 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 14:35:51 2013] Using photon index=1.80, rate=0.00279, arf fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3.arf
[Fri May 10 14:35:51 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 14:35:51 2013] Updating source flux to 8.3e-14
[Fri May 10 14:36:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 14:36:07 2013] xmm0106660601/analysis//spectral/fullrun_mos2_xmm0106660601_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete