[Fri May 10 01:59:32 2013] Detection parameters:
  Position = (356.6, 212.1) = 22 15 19.40 -17 51 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.8 +/- 22.6
  Background counts = 48.2
  Rate = 0.005 +/- 0.0004

[Fri May 10 01:59:33 2013] Off-axis axis estimate = 7.55'
[Fri May 10 04:10:58 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri May 10 04:10:58 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Fri May 10 04:10:58 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.926
[Fri May 10 04:10:58 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 10.20"
[Fri May 10 05:16:48 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 10 05:16:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5.csv
[Fri May 10 05:16:48 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 10 05:16:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5.csv
[Fri May 10 05:16:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 05:16:49 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 10 05:16:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 10 05:16:49 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 10 05:16:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri May 10 05:16:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106660601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 06:32:57 2013] Warning, spatial fit 5 centroid is now closest to src. 48
[Fri May 10 06:32:57 2013] Vigneting correction estimate = 1.000000
[Fri May 10 06:32:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 06:32:57 2013] Assessing source extent using major
[Fri May 10 06:32:57 2013] Source does appear to be extended
[Fri May 10 06:32:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 08:03:42 2013] Using EEF radius (= 10.20 ")to estimate initial spatial extent for simple fitting
[Fri May 10 08:03:42 2013] Initial guess for spatial extent in simple fitting = 10.20"
[Fri May 10 08:03:42 2013] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.926
[Fri May 10 08:03:42 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 10.20"
[Fri May 10 08:56:45 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 10 08:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5.csv
[Fri May 10 08:56:45 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 10 08:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5.csv
[Fri May 10 08:56:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 08:56:45 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 10 08:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 10 08:56:45 2013] fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 10 08:56:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Fri May 10 08:56:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106660601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 10 10:04:44 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 26 at 13.572152 pixels away
[Fri May 10 10:04:44 2013] Vigneting correction estimate = 1.000000
[Fri May 10 10:04:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 10 10:04:44 2013] Assessing source extent using major
[Fri May 10 10:04:44 2013] Source does appear to be extended
[Fri May 10 10:04:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 10 12:37:41 2013] XMMSAS src. selection expression = ellipse(30972.464050, 18401.160522, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 10 12:37:41 2013] Writing source region out to fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_src.reg
[Fri May 10 12:37:41 2013] Extracting stamp from image fullrun_mos1_xmm0106660601_pi300-10000_cl_sm2.00.img.gz, (319, 175) - (394, 250)
[Fri May 10 12:37:41 2013] XMMSAS bgd. selection expression = annulus(30972.464050, 18401.160522, 1087.500000, 2175.000000, X, Y) && !ellipse(31316.000000, 20171.764400, 319.767209, 319.767209, 0.000000, X, Y)
[Fri May 10 12:37:41 2013] Writing fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26.gif
[Fri May 10 12:40:07 2013] Mean detx,y = (-6708.92, 5917.56) 
[Fri May 10 12:40:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 10 12:40:30 2013] Binned source spectrum to 10 counts/bin
[Fri May 10 12:40:30 2013] Setting source spectrum file to fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Fri May 10 12:40:30 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Fri May 10 12:58:26 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 10 12:58:26 2013] rmf not generated due to insufficient counts
[Fri May 10 14:35:40 2013] Updating aperture counts using extracted products
[Fri May 10 14:35:40 2013] Total counts from fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 475.00
[Fri May 10 14:35:40 2013] Total counts from fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_bgd.pi.gz = 2159.00
[Fri May 10 14:35:40 2013] Got source and background scale factors 1114062.000000, 9584218.000000
[Fri May 10 14:35:40 2013] User source parameters:
  Position = (356.6, 212.1) = 22 15 19.40 -17 51 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 224.0 +/- 22.8
  Background aperture counts = 251.0
  Rate = 0.002 +/- 0.0002

[Fri May 10 14:35:40 2013] Updating counts from extracted products
[Fri May 10 14:35:40 2013] Set source signif. to 224.04/15.84 = 14.14
[Fri May 10 14:35:45 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 10 14:35:45 2013] Using photon index=1.80, rate=0.00212, arf fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26.arf
[Fri May 10 14:35:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 10 14:35:45 2013] Updating source flux to 6.6e-14
[Fri May 10 14:35:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 10 14:36:00 2013] xmm0106660601/analysis//spectral/fullrun_mos1_xmm0106660601_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete