[Sat Jul 14 01:42:12 2012] Detection parameters:
  Position = (372.8, 471.9) = 22 15 15.07 -17 32 21.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.5 +/- 15.7
  Background counts = 6.0
  Rate = 0.02 +/- 0.002

[Sat Jul 14 01:42:12 2012] Off-axis axis estimate = 13.68'
[Sat Jul 14 01:43:23 2012] Using EEF radius (= 13.27 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 01:43:23 2012] Initial guess for spatial extent in simple fitting = 13.27"
[Sat Jul 14 01:43:23 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.972
[Sat Jul 14 01:43:23 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 13.27"
[Sat Jul 14 02:04:30 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jul 14 02:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5.csv
[Sat Jul 14 02:04:30 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jul 14 02:04:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5.csv
[Sat Jul 14 02:04:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 02:04:30 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jul 14 02:04:30 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jul 14 02:04:30 2012] Fit fullrun_pn_xmm0106660501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jul 14 02:21:01 2012] Spatial fit model total counts = 241.787000, observed total counts = 235.000000
[Sat Jul 14 02:21:01 2012] Offset between fit and detection position for source 5 = 0.299581 pixels
[Sat Jul 14 02:21:01 2012] 240.015000 total counts/ 136.311000 bgd. counts: snr = 8.882394
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.299581 pixels
  Position = (372.5, 471.9) = 22 15 15.16 -17 32 22.1
  Extent = 5.6 (4.4-7.5)", rotation angle = 0
  Source counts = 103.7 +/- 15.5
  Background counts = 136.3
  Rate = 0.02 +/- 0.003
[Sat Jul 14 02:21:01 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 02:21:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 02:21:01 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 02:21:01 2012] Source does appear to be extended
[Sat Jul 14 02:21:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 02:21:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 02:21:09 2012] Initial guess for spatial extent in simple fitting = 5.58"
[Sat Jul 14 02:21:09 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.943
[Sat Jul 14 02:21:09 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 5.58"
[Sat Jul 14 02:42:17 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jul 14 02:42:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5.csv
[Sat Jul 14 02:42:17 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jul 14 02:42:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5.csv
[Sat Jul 14 02:42:17 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 02:42:17 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jul 14 02:42:17 2012] fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jul 14 02:42:17 2012] Fit fullrun_pn_xmm0106660501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Jul 14 02:59:29 2012] Spatial fit model total counts = 198.996000, observed total counts = 199.000000
[Sat Jul 14 02:59:29 2012] Offset between fit and detection position for source 5 = 0.049290 pixels
[Sat Jul 14 02:59:29 2012] 198.061000 total counts/ 97.394000 bgd. counts: snr = 10.200490
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.049290 pixels
  Position = (372.5, 471.9) = 22 15 15.17 -17 32 22.1
  Extent = 5.6 (4.3-7.2)", rotation angle = 0
  Source counts = 100.7 +/- 14.1
  Background counts = 97.4
  Rate = 0.02 +/- 0.002
[Sat Jul 14 02:59:29 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 02:59:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 02:59:29 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 02:59:29 2012] Source does appear to be extended
[Sat Jul 14 02:59:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 02:59:36 2012] XMMSAS src. selection expression = ellipse(32359.087800, 41003.898000, 334.915721, 334.915721, 0.000000, X, Y)
[Sat Jul 14 02:59:36 2012] Writing source region out to fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_src.reg
[Sat Jul 14 02:59:36 2012] Extracting stamp from image fullrun_pn_xmm0106660501_pi300-10000_cl_sm2.00.img.gz, (353, 453) - (392, 491)
[Sat Jul 14 02:59:36 2012] XMMSAS bgd. selection expression = annulus(32359.087800, 41003.898000, 558.192868, 1116.385735, X, Y)
[Sat Jul 14 02:59:36 2012] Writing fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5.gif
[Sat Jul 14 03:01:55 2012] Mean detx,y = (-264.53, -14907.75) 
[Sat Jul 14 03:01:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 03:02:09 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 03:02:10 2012] Setting source spectrum file to fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 14 03:02:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jul 14 03:17:24 2012] Updating aperture counts using extracted products
[Sat Jul 14 03:17:24 2012] Error reading totcts from fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jul 14 03:17:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 03:17:24 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5.arf
[Sat Jul 14 03:17:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 03:17:24 2012] Updating source flux to 1.5e-13
[Sat Jul 14 03:17:33 2012] Reading fit data from xmm0106660501/analysis//spectral/fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_pl.csv
[Sat Jul 14 03:17:33 2012] Spectral fit parameter nH value = 8.37483e+16
[Sat Jul 14 03:17:33 2012] Spectral fit parameter PhoIndex value = 2.34194
[Sat Jul 14 03:17:33 2012] Failed to get F(0.3-8.0) from xmm0106660501/analysis//spectral/fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 03:17:33 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 03:17:33 2012] Using Nh = 8.4e+16, photon index=2.34, rate=0.0176, arf fullrun_pn_xmm0106660501_pi300-10000_pass1_cl_src5.arf
[Sat Jul 14 03:17:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 03:17:33 2012] Updating source flux to 1.1e-13