[Mon Jul  9 10:56:51 2012] Detection parameters:
  Position = (148.2, 321.2) = 22 16 23.49 -17 43 16.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 831.5 +/- 38.2
  Background counts = 89.9
  Rate = 0.02 +/- 0.0008

[Mon Jul  9 10:56:53 2012] Off-axis axis estimate = 11.02'
[Mon Jul  9 11:01:53 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 11:01:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 11:01:53 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Mon Jul  9 11:01:53 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.855
[Mon Jul  9 11:01:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.94"
[Mon Jul  9 12:24:30 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 12:24:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 12:24:30 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 12:24:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 12:24:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 12:24:31 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 12:24:31 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 12:24:31 2012] Fit fullrun_pn_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul  9 13:58:40 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.004214 pixels away
[Mon Jul  9 13:58:40 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:58:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:58:40 2012] Assessing source extent using major
[Mon Jul  9 13:58:40 2012] Source does appear to be extended
[Mon Jul  9 13:58:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 13:59:05 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 13:59:05 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul  9 13:59:05 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Mon Jul  9 13:59:05 2012] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.855
[Mon Jul  9 13:59:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.94"
[Mon Jul  9 15:02:01 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 15:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 15:02:01 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 15:02:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 15:02:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 15:02:01 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 15:02:01 2012] fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 15:02:01 2012] Fit fullrun_pn_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 16:34:46 2012] Spatial fit model total counts = 1496.560000, observed total counts = 1471.000000
[Mon Jul  9 16:34:46 2012] Offset between fit and detection position for source 1 = 0.271479 pixels
[Mon Jul  9 16:34:46 2012] 1496.894000 total counts/ 983.974000 bgd. counts: snr = 16.351508
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.271479 pixels
  Position = (148.3, 321.4) = 22 16 23.45 -17 43 17.1
  Extent = 6.7 (6.1-7.3)", rotation angle = 0
  Source counts = 512.9 +/- 38.7
  Background counts = 984.0
  Rate = 0.01 +/- 0.0009
[Mon Jul  9 16:34:46 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 16:34:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 16:34:46 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 16:34:46 2012] Source does appear to be extended
[Mon Jul  9 16:34:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 16:35:08 2012] XMMSAS src. selection expression = ellipse(12855.245000, 27912.654400, 403.004412, 403.004412, 0.000000, X, Y)
[Mon Jul  9 16:35:08 2012] Writing source region out to fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul  9 16:35:08 2012] Extracting stamp from image fullrun_pn_xmm0106660201_pi300-10000_cl_sm2.00.img.gz, (125, 298) - (171, 345)
[Mon Jul  9 16:35:08 2012] XMMSAS bgd. selection expression = annulus(12855.245000, 27912.654400, 671.674019, 1343.348039, X, Y) && !ellipse(12499.841507, 30055.804565, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul  9 16:35:08 2012] Writing fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1.gif
[Mon Jul  9 16:35:27 2012] Mean detx,y = (-14013.36, 4053.98) 
[Mon Jul  9 16:35:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 16:35:49 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 16:35:50 2012] Setting source spectrum file to fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 16:35:50 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul  9 18:37:04 2012] Updating aperture counts using extracted products
[Mon Jul  9 18:37:05 2012] Error reading totcts from fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul  9 18:37:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:37:05 2012] Using photon index=1.80, rate=0.0117, arf fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 18:37:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:37:05 2012] Updating source flux to 9.4e-14
[Mon Jul  9 18:39:04 2012] Reading fit data from xmm0106660201/analysis//spectral/fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul  9 18:39:04 2012] Spectral fit parameter nH value = 5.07366e+14
[Mon Jul  9 18:39:04 2012] Spectral fit parameter PhoIndex value = 1.86041
[Mon Jul  9 18:39:04 2012] Failed to get F(0.3-8.0) from xmm0106660201/analysis//spectral/fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 18:39:04 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:39:04 2012] Using Nh = 5.1e+14, photon index=1.86, rate=0.0117, arf fullrun_pn_xmm0106660201_pi300-10000_pass1_cl_src1.arf
[Mon Jul  9 18:39:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:39:04 2012] Updating source flux to 9e-14