[Mon Jul  9 10:58:05 2012] Detection parameters:
  Position = (439.8, 368.8) = 22 14 54.73 -17 39 50.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.1 +/- 16.0
  Background counts = 25.1
  Rate = 0.003 +/- 0.0003

[Mon Jul  9 10:58:06 2012] Off-axis axis estimate = 11.45'
[Mon Jul  9 13:18:04 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 13:18:04 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jul  9 13:18:04 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jul  9 13:18:04 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 12.15"
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jul  9 13:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13.csv
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jul  9 13:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13.csv
[Mon Jul  9 13:58:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jul  9 13:58:29 2012] Fit fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jul  9 13:58:52 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.651416 pixels away
[Mon Jul  9 13:58:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:58:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:58:52 2012] Assessing source extent using major
[Mon Jul  9 13:58:52 2012] Source does appear to be extended
[Mon Jul  9 13:58:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 15:48:14 2012] Using EEF radius (= 12.15 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 15:48:14 2012] Initial guess for spatial extent in simple fitting = 12.15"
[Mon Jul  9 15:48:14 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.968
[Mon Jul  9 15:48:14 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 12.15"
[Mon Jul  9 16:34:35 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jul  9 16:34:35 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jul  9 16:34:35 2012] Fit fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src13 appears to have run properly
[Mon Jul  9 16:34:36 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jul  9 16:34:36 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jul  9 16:34:36 2012] Fit fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jul  9 16:34:56 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.367225 pixels away
[Mon Jul  9 16:34:57 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 16:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 16:34:57 2012] Assessing source extent using major
[Mon Jul  9 16:34:57 2012] Source does appear to be extended
[Mon Jul  9 16:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 18:13:55 2012] XMMSAS src. selection expression = ellipse(38213.153748, 32039.536255, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul  9 18:13:55 2012] Writing source region out to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5_src.reg
[Mon Jul  9 18:13:55 2012] Extracting stamp from image fullrun_mos2_xmm0106660201_pi300-10000_cl_sm2.00.img.gz, (402, 331) - (477, 406)
[Mon Jul  9 18:13:55 2012] XMMSAS bgd. selection expression = annulus(38213.153748, 32039.536255, 1087.500000, 2175.000000, X, Y)
[Mon Jul  9 18:13:55 2012] Writing fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5.gif
[Mon Jul  9 18:16:55 2012] Mean detx,y = (-8183.16, 8401.49) 
[Mon Jul  9 18:16:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 18:17:14 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 18:17:14 2012] Setting source spectrum file to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul  9 18:17:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jul  9 18:33:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul  9 18:33:53 2012] rmf not generated due to insufficient counts
[Mon Jul  9 18:37:07 2012] Updating aperture counts using extracted products
[Mon Jul  9 18:37:07 2012] Error reading totcts from fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul  9 18:37:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:37:07 2012] Using photon index=1.80, rate=0.00255, arf fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src5.arf
[Mon Jul  9 18:37:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:37:07 2012] Updating source flux to 5.1e-14
[Mon Jul  9 18:37:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting