[Mon Jul  9 10:58:06 2012] Detection parameters:
  Position = (315.3, 273.3) = 22 15 32.63 -17 46 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.5 +/- 13.6
  Background counts = 32.0
  Rate = 0.002 +/- 0.0003

[Mon Jul  9 10:58:06 2012] Off-axis axis estimate = 2.19'
[Mon Jul  9 13:18:04 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 13:18:04 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Mon Jul  9 13:18:04 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.005
[Mon Jul  9 13:18:04 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 7.53"
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19.ximg exists
[Mon Jul  9 13:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19.csv
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19_1.ximg exists
[Mon Jul  9 13:58:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19.csv
[Mon Jul  9 13:58:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Mon Jul  9 13:58:29 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Mon Jul  9 13:58:29 2012] Fit fullrun_mos2_xmm0106660201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Mon Jul  9 13:58:52 2012] Spatial fit model total counts = 311.002000, observed total counts = 292.000000
[Mon Jul  9 13:58:52 2012] Offset between fit and detection position for source 29 = 0.107860 pixels
[Mon Jul  9 13:58:52 2012] 317.301100 total counts/ 282.716000 bgd. counts: snr = 2.056903
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.107860 pixels
  Position = (315.2, 273.4) = 22 15 32.63 -17 46 46.3
  Extent = 4.2 (2.3-7.4)", rotation angle = 0
  Source counts = 34.6 +/- 17.8
  Background counts = 282.7
  Rate = 0.0007 +/- 0.0003
[Mon Jul  9 13:58:52 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:58:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:58:52 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 13:58:52 2012] Source does appear to be extended
[Mon Jul  9 13:58:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 15:48:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 15:48:14 2012] Initial guess for spatial extent in simple fitting = 4.18"
[Mon Jul  9 15:48:14 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.055
[Mon Jul  9 15:48:14 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 4.18"
[Mon Jul  9 16:34:35 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19.ximg exists
[Mon Jul  9 16:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19.csv
[Mon Jul  9 16:34:35 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19_1.ximg exists
[Mon Jul  9 16:34:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19.csv
[Mon Jul  9 16:34:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 16:34:36 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Mon Jul  9 16:34:36 2012] fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Mon Jul  9 16:34:36 2012] Fit fullrun_mos2_xmm0106660201_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Mon Jul  9 16:34:56 2012] Warning, spatial fit 19 centroid is now closest to src. 8
[Mon Jul  9 16:34:57 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 16:34:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 16:34:57 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 16:34:57 2012] Source does appear to be extended
[Mon Jul  9 16:34:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 18:13:56 2012] XMMSAS src. selection expression = ellipse(27376.910600, 23735.231800, 250.578007, 250.578007, 0.000000, X, Y)
[Mon Jul  9 18:13:56 2012] Writing source region out to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29_src.reg
[Mon Jul  9 18:13:56 2012] Extracting stamp from image fullrun_mos2_xmm0106660201_pi300-10000_cl_sm2.00.img.gz, (301, 259) - (330, 288)
[Mon Jul  9 18:13:56 2012] XMMSAS bgd. selection expression = annulus(27376.910600, 23735.231800, 417.630012, 835.260024, X, Y) && !ellipse(26186.918200, 25170.027600, 1077.128031, 1077.128031, 0.000000, X, Y)
[Mon Jul  9 18:13:56 2012] Writing fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29.gif
[Mon Jul  9 18:18:57 2012] Mean detx,y = (-961.14, -3163.94) 
[Mon Jul  9 18:18:58 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 18:19:04 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 18:19:04 2012] Setting source spectrum file to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul  9 18:19:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul  9 18:34:40 2012] Not generating rmf since there are only 34 counts
[Mon Jul  9 18:34:40 2012] rmf not generated due to insufficient counts
[Mon Jul  9 18:37:07 2012] Updating aperture counts using extracted products
[Mon Jul  9 18:37:07 2012] Error reading totcts from fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul  9 18:37:07 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 18:37:07 2012] Using photon index=1.80, rate=0.000676, arf fullrun_mos2_xmm0106660201_pi300-10000_pass1_cl_src29.arf
[Mon Jul  9 18:37:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 18:37:07 2012] Updating source flux to 8.3e-15
[Mon Jul  9 18:37:38 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting