[Tue Jul 24 15:04:33 2012] Detection parameters:
  Position = (306.9, 294.0) = 9 42 54.79 47 0 51.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.3 +/- 20.3
  Background counts = 114.2
  Rate = 0.003 +/- 0.0005

[Tue Jul 24 15:04:34 2012] Off-axis axis estimate = 0.70'
[Tue Jul 24 15:07:38 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 15:07:38 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Tue Jul 24 15:07:38 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Tue Jul 24 15:07:38 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 6.78"
[Tue Jul 24 17:08:52 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46.ximg exists
[Tue Jul 24 17:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46.csv
[Tue Jul 24 17:08:52 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46_1.ximg exists
[Tue Jul 24 17:08:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46.csv
[Tue Jul 24 17:08:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 17:08:53 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Tue Jul 24 17:08:53 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Tue Jul 24 17:08:53 2012] Fit fullrun_pn_xmm0106460101_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Tue Jul 24 20:22:42 2012] Warning, spatial fit 46 centroid is now closest to src. 28
[Tue Jul 24 20:22:42 2012] Spatial fit model total counts = 1450.620000, observed total counts = 1284.000000
[Tue Jul 24 20:22:42 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 24 20:22:42 2012] Vigneting correction estimate = 1.000000
[Tue Jul 24 20:22:42 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 24 20:22:42 2012] Assessing source extent using major
[Tue Jul 24 20:22:42 2012] Source does appear to be extended
[Tue Jul 24 20:22:42 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 24 20:22:42 2012] Source is confused with source 28
[Tue Jul 24 20:23:16 2012] Using EEF radius (= 6.78 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 20:23:16 2012] Initial guess for spatial extent in simple fitting = 6.78"
[Tue Jul 24 20:23:16 2012] source mask rpix=1.6, npix_max = 16, mask sum = 16, frac = 0.945
[Tue Jul 24 20:23:16 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 6.78"
[Tue Jul 24 22:24:53 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45.ximg exists
[Tue Jul 24 22:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45.csv
[Tue Jul 24 22:24:53 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45_1.ximg exists
[Tue Jul 24 22:24:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45.csv
[Tue Jul 24 22:24:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 22:24:54 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Tue Jul 24 22:24:54 2012] fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Tue Jul 24 22:24:54 2012] Fit fullrun_pn_xmm0106460101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Wed Jul 25 01:00:03 2012] Warning, spatial fit 45 centroid is now closest to src. 28
[Wed Jul 25 01:00:03 2012] Source 48 is offset by 5.304295 and 0.397781 pixels which is larger than
2 X fitted extent = 2.189274 x 2.189274, not incorporating fit results
[Wed Jul 25 01:00:04 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 01:00:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 01:00:04 2012] Assessing source extent using major
[Wed Jul 25 01:00:04 2012] Source does appear to be extended
[Wed Jul 25 01:00:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 01:00:31 2012] XMMSAS src. selection expression = ellipse(26655.715637, 25528.822968, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Jul 25 01:00:31 2012] Writing source region out to fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48_src.reg
[Wed Jul 25 01:00:31 2012] Extracting stamp from image fullrun_pn_xmm0106460101_pi300-10000_cl_sm2.00.img.gz, (269, 256) - (344, 331)
[Wed Jul 25 01:00:31 2012] XMMSAS bgd. selection expression = annulus(26655.715637, 25528.822968, 1087.500000, 2175.000000, X, Y) && !ellipse(25220.414000, 26209.122000, 365.274411, 365.274411, 0.000000, X, Y) && !ellipse(25888.022800, 24030.900600, 1147.768033, 644.550419, 65.753000, X, Y) && !ellipse(24228.736400, 24097.966600, 1200.984035, 1200.984035, 0.000000, X, Y) && !ellipse(24994.480200, 24003.655800, 1692.424049, 1692.424049, 0.000000, X, Y) && !ellipse(25528.201691, 23459.769257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24762.854980, 23005.618530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25100.065860, 27253.876120, 337.013610, 337.013610, 0.000000, X, Y) && !ellipse(26118.564000, 25473.906800, 327.214409, 327.214409, 0.000000, X, Y) && !ellipse(25358.061520, 24901.602000, 1081.800031, 1081.800031, 0.000000, X, Y) && !ellipse(26256.441711, 22865.419708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24114.704800, 27255.590400, 394.148011, 394.148011, 0.000000, X, Y) && !ellipse(27267.115784, 27024.801880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24682.442108, 26532.503693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26079.650000, 26037.278000, 2163.600062, 2163.600062, 0.000000, X, Y) && !ellipse(24906.075226, 25709.110077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26749.847046, 25096.422241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24351.282959, 25002.580231, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27150.225464, 24813.220886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27434.889740, 24221.709564, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 25 01:00:31 2012] Writing fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48.gif
[Wed Jul 25 01:35:36 2012] Mean detx,y = (-1460.04, 842.10) 
[Wed Jul 25 01:35:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 25 01:35:51 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 25 01:35:52 2012] Setting source spectrum file to fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Jul 25 01:35:52 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Wed Jul 25 08:43:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 25 08:43:47 2012] rmf not generated due to insufficient counts
[Wed Jul 25 11:08:05 2012] Updating aperture counts using extracted products
[Wed Jul 25 11:08:05 2012] Error reading totcts from fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Wed Jul 25 11:08:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 25 11:08:09 2012] Using photon index=1.80, rate=0.00263, arf fullrun_pn_xmm0106460101_pi300-10000_pass1_cl_src48.arf
[Wed Jul 25 11:08:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 25 11:08:09 2012] Updating source flux to 7.7e-15
[Wed Jul 25 11:11:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting