[Tue Mar 27 01:17:41 2012] Detection parameters:
  Position = (261.4, 284.9) = 18 56 43.80 -37 54 8.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.2 +/- 22.4
  Background counts = 113.6
  Rate = 0.003 +/- 0.0006

[Tue Mar 27 01:17:41 2012] Off-axis axis estimate = 2.86'
[Tue Mar 27 01:35:21 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 01:35:21 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Tue Mar 27 01:35:21 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.940
[Tue Mar 27 01:35:21 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.86"
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5.csv
[Tue Mar 27 02:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Mar 27 02:01:38 2012] Fit fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Mar 27 04:08:44 2012] Spatial fit model total counts = 1909.330000, observed total counts = 1912.000000
[Tue Mar 27 04:08:44 2012] Offset between fit and detection position for source 5 = 5.170728 pixels
[Tue Mar 27 04:08:44 2012] 1935.673000 total counts/ 1651.970000 bgd. counts: snr = 6.980119
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.170728 pixels
  Position = (266.5, 285.2) = 18 56 41.91 -37 54 8.1
  Extent = 15.7 (15.7-31.4)", rotation angle = 0
  Source counts = 283.7 +/- 44.0
  Background counts = 1652.0
  Rate = 0.005 +/- 0.0008
[Tue Mar 27 04:08:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 04:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 04:08:44 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 04:08:44 2012] Source does appear to be extended
[Tue Mar 27 04:08:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 04:09:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 04:09:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 04:09:13 2012] Initial guess for spatial extent in simple fitting = 15.72"
[Tue Mar 27 04:09:13 2012] source mask rpix=3.6, npix_max = 67, mask sum = 72, frac = 1.064
[Tue Mar 27 04:09:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 15.72"
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3.csv
[Tue Mar 27 04:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 27 04:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 06:45:20 2012] Warning, spatial fit 3 centroid is now closest to src. 7
[Tue Mar 27 06:45:20 2012] Source 3 in spatial fitting is no longer close to this source
[Tue Mar 27 06:45:20 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 06:45:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 06:45:20 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 06:45:20 2012] Source does appear to be extended
[Tue Mar 27 06:45:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 06:45:49 2012] XMMSAS src. selection expression = ellipse(23139.082000, 24762.146600, 943.152027, 943.152027, 0.000000, X, Y)
[Tue Mar 27 06:45:49 2012] Writing source region out to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5_src.reg
[Tue Mar 27 06:45:49 2012] Extracting stamp from image fullrun_pn_xmm0106260101_pi300-10000_cl_sm2.00.img.gz, (212, 231) - (321, 339)
[Tue Mar 27 06:45:49 2012] XMMSAS bgd. selection expression = annulus(23139.082000, 24762.146600, 1571.920045, 3143.840090, X, Y) && !ellipse(24730.142400, 27784.008000, 958.136028, 928.272027, 89.992000, X, Y) && !ellipse(24772.938761, 27040.178202, 1587.944046, 476.510626, 94.960654, X, Y) && !ellipse(24641.278400, 24210.140000, 1476.556842, 1476.556842, 0.000000, X, Y)
[Tue Mar 27 06:45:49 2012] Writing fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5.gif
[Tue Mar 27 07:19:12 2012] Mean detx,y = (1430.83, 51.76) 
[Tue Mar 27 07:19:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 07:20:15 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 07:20:16 2012] Setting source spectrum file to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Mar 27 07:20:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Mar 27 08:57:46 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:57:46 2012] Error reading totcts from fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Mar 27 08:57:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:57:47 2012] Using photon index=1.80, rate=0.00497, arf fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src5.arf
[Tue Mar 27 08:57:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:57:47 2012] Updating source flux to 1.1e-14