[Tue Mar 27 01:17:41 2012] Detection parameters:
  Position = (286.7, 324.0) = 18 56 34.48 -37 51 20.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.9 +/- 22.0
  Background counts = 126.6
  Rate = 0.004 +/- 0.0006

[Tue Mar 27 01:17:41 2012] Off-axis axis estimate = 2.04'
[Tue Mar 27 01:35:21 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 01:35:21 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue Mar 27 01:35:21 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Tue Mar 27 01:35:21 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.45"
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 02:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 02:01:38 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 02:01:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 02:01:38 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 04:08:44 2012] Spatial fit model total counts = 1675.590000, observed total counts = 1359.000000
[Tue Mar 27 04:08:44 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Mar 27 04:08:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 04:08:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 04:08:44 2012] Assessing source extent using major
[Tue Mar 27 04:08:44 2012] Source does appear to be extended
[Tue Mar 27 04:08:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 04:09:13 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 04:09:13 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Tue Mar 27 04:09:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Tue Mar 27 04:09:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.45"
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 04:50:28 2012] Fit fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 04:50:28 2012] fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 04:50:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Mar 27 04:50:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 06:45:20 2012] Spatial fit model total counts = 1414.680000, observed total counts = 1359.000000
[Tue Mar 27 06:45:20 2012] Offset between fit and detection position for source 1 = 4.512767 pixels
[Tue Mar 27 06:45:20 2012] 1442.218000 total counts/ 648.510000 bgd. counts: snr = 31.167532
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 4.512767 pixels
  Position = (284.8, 319.9) = 18 56 35.18 -37 51 37.1
  Extent = 12.0 (12.0-24.0)" x 11.6 (11.6-11.6)", rotation angle = 90 (90-90) degrees
  Source counts = 793.7 +/- 38.0
  Background counts = 648.5
  Rate = 0.01 +/- 0.0007
[Tue Mar 27 06:45:20 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 06:45:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 06:45:20 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 06:45:20 2012] Source does appear to be extended
[Tue Mar 27 06:45:20 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.03
[Tue Mar 27 06:45:20 2012] Source is confused with source 4
[Tue Mar 27 06:45:49 2012] XMMSAS src. selection expression = ellipse(24730.142400, 27784.008000, 718.602021, 696.204020, 89.992000, X, Y)
[Tue Mar 27 06:45:49 2012] Writing source region out to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 27 06:45:49 2012] Extracting stamp from image fullrun_pn_xmm0106260101_pi300-10000_cl_sm2.00.img.gz, (244, 279) - (326, 361)
[Tue Mar 27 06:45:49 2012] XMMSAS bgd. selection expression = annulus(24730.142400, 27784.008000, 1197.670034, 2395.340069, X, Y) && !ellipse(24772.938761, 27040.178202, 1587.944046, 476.510626, 94.960654, X, Y) && !ellipse(23139.082000, 24762.146600, 1257.536036, 1257.536036, 0.000000, X, Y) && !ellipse(24641.278400, 24210.140000, 1476.556842, 1476.556842, 0.000000, X, Y)
[Tue Mar 27 06:45:49 2012] Writing fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1.gif
[Tue Mar 27 06:56:01 2012] Mean detx,y = (194.69, 3249.77) 
[Tue Mar 27 06:56:33 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 06:57:16 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 06:57:16 2012] Setting source spectrum file to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 06:57:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 27 08:57:46 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:57:46 2012] Error reading totcts from fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 08:57:46 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:57:46 2012] Using photon index=1.80, rate=0.0139, arf fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 08:57:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:57:47 2012] Updating source flux to 3.9e-14
[Tue Mar 27 08:58:47 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Mar 27 08:58:47 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Mar 27 09:00:02 2012] Reading fit data from xmm0106260101/analysis//spectral/fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 27 09:00:02 2012] Spectral fit parameter nH value = 1.25309e+21
[Tue Mar 27 09:00:02 2012] Spectral fit parameter PhoIndex value = 9.49997
[Tue Mar 27 09:00:02 2012] Failed to get F(0.3-8.0) from xmm0106260101/analysis//spectral/fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 09:00:02 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 09:00:02 2012] Using Nh = 1.3e+21, photon index=9.50, rate=0.0139, arf fullrun_pn_xmm0106260101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 09:00:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 09:00:02 2012] Updating source flux to 1.8e-14