[Tue Mar 27 01:19:09 2012] Detection parameters:
  Position = (172.3, 262.0) = 18 57 16.57 -37 55 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 435.6 +/- 26.3
  Background counts = 25.3
  Rate = 0.01 +/- 0.0008

[Tue Mar 27 01:19:10 2012] Off-axis axis estimate = 9.52'
[Tue Mar 27 02:58:41 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 02:58:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 02:58:41 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Mar 27 02:58:41 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Tue Mar 27 02:58:41 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.19"
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2.csv
[Tue Mar 27 04:08:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Mar 27 04:08:40 2012] Fit fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Mar 27 04:09:00 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.427089 pixels away
[Tue Mar 27 04:09:00 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 04:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 04:09:00 2012] Assessing source extent using major
[Tue Mar 27 04:09:00 2012] Source does appear to be extended
[Tue Mar 27 04:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 05:38:49 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:38:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 05:38:49 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Mar 27 05:38:49 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.954
[Tue Mar 27 05:38:49 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.19"
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Mar 27 06:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2.csv
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Mar 27 06:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2.csv
[Tue Mar 27 06:45:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Mar 27 06:45:16 2012] Fit fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Mar 27 06:45:37 2012] Spatial fit model total counts = 631.999000, observed total counts = 632.000000
[Tue Mar 27 06:45:37 2012] Offset between fit and detection position for source 2 = 0.119104 pixels
[Tue Mar 27 06:45:37 2012] 636.405000 total counts/ 342.700000 bgd. counts: snr = 15.865519
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.119104 pixels
  Position = (172.3, 262.1) = 18 57 16.54 -37 55 47.9
  Extent = 5.2 (4.6-5.8)", rotation angle = 0
  Source counts = 293.7 +/- 25.2
  Background counts = 342.7
  Rate = 0.005 +/- 0.0004
[Tue Mar 27 06:45:37 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 06:45:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 06:45:37 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 06:45:37 2012] Source does appear to be extended
[Tue Mar 27 06:45:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:19:22 2012] XMMSAS src. selection expression = ellipse(14944.419000, 22755.307000, 309.747609, 309.747609, 0.000000, X, Y)
[Tue Mar 27 08:19:22 2012] Writing source region out to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 27 08:19:22 2012] Extracting stamp from image fullrun_mos2_xmm0106260101_pi300-10000_cl_sm2.00.img.gz, (155, 244) - (190, 280)
[Tue Mar 27 08:19:22 2012] XMMSAS bgd. selection expression = annulus(14944.419000, 22755.307000, 516.246015, 1032.492030, X, Y)
[Tue Mar 27 08:19:22 2012] Writing fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2.gif
[Tue Mar 27 08:22:53 2012] Mean detx,y = (-9529.03, 2293.27) 
[Tue Mar 27 08:22:56 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 08:23:08 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 08:23:08 2012] Setting source spectrum file to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 08:23:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 27 08:57:50 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:57:50 2012] Error reading totcts from fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 08:57:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:57:51 2012] Using photon index=1.80, rate=0.00507, arf fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 08:57:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:57:51 2012] Updating source flux to 1.1e-13