[Tue Mar 27 01:19:09 2012] Detection parameters:
  Position = (283.7, 278.9) = 18 56 35.60 -37 54 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39503.3 +/- 231.3
  Background counts = 31.6
  Rate = 0.7 +/- 0.004

[Tue Mar 27 01:19:10 2012] Off-axis axis estimate = 1.78'
[Tue Mar 27 02:58:41 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 02:58:41 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Mar 27 02:58:41 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Tue Mar 27 02:58:41 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.32"
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 04:08:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 04:08:40 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 04:08:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Mar 27 04:08:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 04:09:00 2012] Warning, spatial fit 1 centroid is now closest to src. 20
[Tue Mar 27 04:09:00 2012] Source 1 is offset by 4.770872 and -0.085877 pixels which is larger than
2 X fitted extent = 3.714530 x 6.937288, not incorporating fit results
[Tue Mar 27 04:09:00 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 04:09:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 04:09:00 2012] Assessing source extent using major
[Tue Mar 27 04:09:00 2012] Source does appear to be extended
[Tue Mar 27 04:09:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 05:38:49 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 05:38:49 2012] Initial guess for spatial extent in simple fitting = 7.32"
[Tue Mar 27 05:38:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Tue Mar 27 05:38:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.32"
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 06:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 06:45:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 27 06:45:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 06:45:16 2012] fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 06:45:16 2012] Fit fullrun_mos2_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 27 06:45:37 2012] Spatial fit model total counts = 36610.600000, observed total counts = 34891.000000
[Tue Mar 27 06:45:37 2012] Offset between fit and detection position for source 1 = 0.104554 pixels
[Tue Mar 27 06:45:37 2012] 36422.450000 total counts/ 9485.650000 bgd. counts: snr = 276.574702
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.104554 pixels
  Position = (283.7, 278.8) = 18 56 35.58 -37 54 36.0
  Extent = 5.2 (5.1-5.2)", rotation angle = 0
  Source counts = 26936.8 +/- 190.8
  Background counts = 9485.6
  Rate = 0.5 +/- 0.003
[Tue Mar 27 06:45:37 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 06:45:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 06:45:37 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 06:45:37 2012] Source does appear to be extended
[Tue Mar 27 06:45:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 08:19:22 2012] Counts = 26936.800000, rescaling region sizes by 3.000000
[Tue Mar 27 08:19:22 2012] XMMSAS src. selection expression = ellipse(24637.277800, 24204.478400, 929.745027, 929.745027, 0.000000, X, Y)
[Tue Mar 27 08:19:22 2012] Writing source region out to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 27 08:19:22 2012] Extracting stamp from image fullrun_mos2_xmm0106260101_pi300-10000_cl_sm2.00.img.gz, (230, 225) - (337, 332)
[Tue Mar 27 08:19:22 2012] XMMSAS bgd. selection expression = annulus(24637.277800, 24204.478400, 4648.725134, 9297.450268, X, Y) && !ellipse(14944.419000, 22755.307000, 412.996812, 412.996812, 0.000000, X, Y) && !ellipse(33566.313507, 22406.920044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16712.942794, 19694.889653, 576.304701, 388.270365, 28.751088, X, Y) && !ellipse(25923.761230, 34229.940735, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17425.175000, 29668.443800, 386.731211, 386.731211, 0.000000, X, Y) && !ellipse(24677.689660, 16243.804600, 380.552811, 380.552811, 0.000000, X, Y) && !ellipse(14858.245621, 33471.717468, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23650.081757, 24487.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32223.986450, 20931.108734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29633.949615, 16667.488785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22466.198883, 15041.072266, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 27 08:19:22 2012] Writing fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1.gif
[Tue Mar 27 08:19:39 2012] Mean detx,y = (48.26, 171.04) 
[Tue Mar 27 08:19:42 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 08:22:45 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 08:22:45 2012] Setting source spectrum file to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 08:22:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 27 08:57:50 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:57:50 2012] Error reading totcts from fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 27 08:57:51 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:57:51 2012] Using photon index=1.80, rate=0.465, arf fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 08:57:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:57:51 2012] Updating source flux to 4.7e-12
[Tue Mar 27 08:58:04 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Tue Mar 27 08:58:47 2012] Reading fit data from xmm0106260101/analysis//spectral/fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 27 08:58:47 2012] Spectral fit parameter nH value = 1.27313e+21
[Tue Mar 27 08:58:47 2012] Spectral fit parameter PhoIndex value = 8.80277
[Tue Mar 27 08:58:47 2012] Failed to get F(0.3-8.0) from xmm0106260101/analysis//spectral/fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 08:58:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:58:47 2012] Using Nh = 1.3e+21, photon index=8.80, rate=0.465, arf fullrun_mos2_xmm0106260101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 27 08:58:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:58:47 2012] Updating source flux to 3.4e-12