[Tue Mar 27 01:18:22 2012] Detection parameters:
  Position = (172.2, 261.9) = 18 57 16.58 -37 55 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.0 +/- 27.0
  Background counts = 24.6
  Rate = 0.01 +/- 0.0007

[Tue Mar 27 01:18:23 2012] Off-axis axis estimate = 9.52'
[Tue Mar 27 02:01:38 2012] Using EEF radius (= 11.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar 27 02:01:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 27 02:01:38 2012] Initial guess for spatial extent in simple fitting = 11.19"
[Tue Mar 27 02:01:38 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.953
[Tue Mar 27 02:01:38 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.19"
[Tue Mar 27 02:58:40 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 27 02:58:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 02:58:40 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 27 02:58:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 27 02:58:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 27 02:58:41 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 27 02:58:41 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 27 02:58:41 2012] Fit fullrun_mos1_xmm0106260101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 27 04:08:53 2012] Spatial fit model total counts = 864.901000, observed total counts = 862.000000
[Tue Mar 27 04:08:53 2012] Offset between fit and detection position for source 2 = 0.065344 pixels
[Tue Mar 27 04:08:53 2012] 865.097000 total counts/ 529.274000 bgd. counts: snr = 14.597220
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.065344 pixels
  Position = (172.3, 261.9) = 18 57 16.56 -37 55 48.9
  Extent = 6.0 (5.5-6.7)", rotation angle = 0
  Source counts = 335.8 +/- 29.4
  Background counts = 529.3
  Rate = 0.006 +/- 0.0005
[Tue Mar 27 04:08:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 04:08:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 04:08:53 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 04:08:53 2012] Source does appear to be extended
[Tue Mar 27 04:08:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 04:50:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 27 04:50:28 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Tue Mar 27 04:50:28 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.136
[Tue Mar 27 04:50:28 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.99"
[Tue Mar 27 05:38:49 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 27 05:38:49 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 27 05:38:49 2012] Fit fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_src1 appears to have run properly
[Tue Mar 27 05:38:49 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 27 05:38:49 2012] fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 27 05:38:49 2012] Fit fullrun_mos1_xmm0106260101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 27 06:45:28 2012] Spatial fit model total counts = 667.000000, observed total counts = 667.000000
[Tue Mar 27 06:45:28 2012] Offset between fit and detection position for source 2 = 0.013246 pixels
[Tue Mar 27 06:45:28 2012] 664.641000 total counts/ 337.575000 bgd. counts: snr = 17.801240
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.013246 pixels
  Position = (172.3, 261.9) = 18 57 16.56 -37 55 48.8
  Extent = 5.9 (5.3-6.5)", rotation angle = 0
  Source counts = 327.1 +/- 25.8
  Background counts = 337.6
  Rate = 0.006 +/- 0.0004
[Tue Mar 27 06:45:28 2012] Vigneting correction estimate = 1.000000
[Tue Mar 27 06:45:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 27 06:45:28 2012] Assessing source extent using major axis lower bound
[Tue Mar 27 06:45:28 2012] Source does appear to be extended
[Tue Mar 27 06:45:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 27 07:58:55 2012] XMMSAS src. selection expression = ellipse(14939.915000, 22737.144600, 352.600210, 352.600210, 0.000000, X, Y)
[Tue Mar 27 07:58:55 2012] Writing source region out to fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 27 07:58:55 2012] Extracting stamp from image fullrun_mos1_xmm0106260101_pi300-10000_cl_sm2.00.img.gz, (152, 242) - (193, 282)
[Tue Mar 27 07:58:55 2012] XMMSAS bgd. selection expression = annulus(14939.915000, 22737.144600, 587.667017, 1175.334034, X, Y)
[Tue Mar 27 07:58:55 2012] Writing fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2.gif
[Tue Mar 27 07:59:01 2012] Mean detx,y = (2481.70, 9375.24) 
[Tue Mar 27 07:59:03 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Mar 27 07:59:20 2012] Binned source spectrum to 10 counts/bin
[Tue Mar 27 07:59:20 2012] Setting source spectrum file to fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 07:59:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 27 08:57:47 2012] Updating aperture counts using extracted products
[Tue Mar 27 08:57:47 2012] Error reading totcts from fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 27 08:57:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:57:48 2012] Using photon index=1.80, rate=0.00568, arf fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 08:57:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:57:48 2012] Updating source flux to 9.1e-14
[Tue Mar 27 08:58:04 2012] Reading fit data from xmm0106260101/analysis//spectral/fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 27 08:58:04 2012] Spectral fit parameter nH value = 1.91344e+21
[Tue Mar 27 08:58:04 2012] Spectral fit parameter PhoIndex value = 1.60388
[Tue Mar 27 08:58:04 2012] Failed to get F(0.3-8.0) from xmm0106260101/analysis//spectral/fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 27 08:58:04 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 27 08:58:04 2012] Using Nh = 1.9e+21, photon index=1.60, rate=0.00568, arf fullrun_mos1_xmm0106260101_pi300-10000_pass1_cl_src2.arf
[Tue Mar 27 08:58:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 27 08:58:04 2012] Updating source flux to 1.2e-13