[Sat Sep  8 15:27:48 2012] Detection parameters:
  Position = (427.6, 396.9) = 12 30 12.08 15 8 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 19.3 +/- 5.7
  Background counts = 2.8
  Rate = 0.002 +/- 0.0007

[Sat Sep  8 15:27:48 2012] Off-axis axis estimate = 11.78'
[Sat Sep  8 16:06:17 2012] Using EEF radius (= 12.32 ")to estimate initial spatial extent for simple fitting
[Sat Sep  8 16:06:17 2012] Initial guess for spatial extent in simple fitting = 12.32"
[Sat Sep  8 16:06:17 2012] source mask rpix=2.8, npix_max = 44, mask sum = 41, frac = 0.923
[Sat Sep  8 16:06:17 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 12.32"
[Sat Sep  8 16:21:21 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_src12.ximg exists
[Sat Sep  8 16:21:21 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Sep  8 16:21:21 2012] Fit fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_src12 appears to have run properly
[Sat Sep  8 16:21:21 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Sep  8 16:21:21 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Sep  8 16:21:21 2012] Fit fullrun_mos2_xmm0106061401_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Sep  8 16:21:27 2012] Spatial fit model total counts = 55.720700, observed total counts = 53.000000
[Sat Sep  8 16:21:27 2012] Offset between fit and detection position for source 3 = 0.737485 pixels
[Sat Sep  8 16:21:27 2012] 55.124100 total counts/ 33.062400 bgd. counts: snr = 3.836823
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.737485 pixels
  Position = (427.0, 397.3) = 12 30 12.27 15 8 55.9
  Extent = 9.2 (3.1-14.3)", rotation angle = 0
  Source counts = 22.1 +/- 7.4
  Background counts = 33.1
  Rate = 0.003 +/- 0.0009
[Sat Sep  8 16:21:27 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 16:21:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 16:21:27 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 16:21:27 2012] Source does appear to be extended
[Sat Sep  8 16:21:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 16:54:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Sep  8 16:54:20 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Sat Sep  8 16:54:20 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.090
[Sat Sep  8 16:54:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 9.24"
[Sat Sep  8 17:06:16 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11.ximg exists
[Sat Sep  8 17:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11.csv
[Sat Sep  8 17:06:16 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Sep  8 17:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11.csv
[Sat Sep  8 17:06:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 17:06:16 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Sep  8 17:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Sep  8 17:06:16 2012] fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Sep  8 17:06:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Sep  8 17:06:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  8 17:06:21 2012] Spatial fit model total counts = 44.803900, observed total counts = 51.000000
[Sat Sep  8 17:06:21 2012] Offset between fit and detection position for source 3 = 1.367131 pixels
[Sat Sep  8 17:06:21 2012] 40.448120 total counts/ 4.732720 bgd. counts: snr = 16.417239
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.367131 pixels
  Position = (427.5, 398.6) = 12 30 12.12 15 9 1.5
  Extent = 11.8 (10.9-13.6)", rotation angle = 0
  Source counts = 35.7 +/- 6.4
  Background counts = 4.7
  Rate = 0.004 +/- 0.0008
[Sat Sep  8 17:06:21 2012] Vigneting correction estimate = 1.000000
[Sat Sep  8 17:06:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  8 17:06:21 2012] Assessing source extent using major axis lower bound
[Sat Sep  8 17:06:21 2012] Source does appear to be extended
[Sat Sep  8 17:06:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  8 17:13:17 2012] XMMSAS src. selection expression = ellipse(37141.140000, 34627.037000, 705.846020, 705.846020, 0.000000, X, Y)
[Sat Sep  8 17:13:17 2012] Writing source region out to fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3_src.reg
[Sat Sep  8 17:13:17 2012] Extracting stamp from image fullrun_mos2_xmm0106061401_pi300-10000_cl_sm2.00.img.gz, (387, 358) - (468, 439)
[Sat Sep  8 17:13:17 2012] XMMSAS bgd. selection expression = annulus(37141.140000, 34627.037000, 1176.410034, 2352.820068, X, Y)
[Sat Sep  8 17:13:17 2012] Writing fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3.gif
[Sat Sep  8 17:14:36 2012] Mean detx,y = (-12693.85, 1101.29) 
[Sat Sep  8 17:14:37 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  8 17:14:42 2012] grppha failed
[Sat Sep  8 17:14:42 2012] Setting source spectrum file to fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  8 17:14:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Sep  8 17:14:44 2012] Not generating rmf since there are only 35 counts
[Sat Sep  8 17:14:44 2012] rmf not generated due to insufficient counts
[Sat Sep  8 17:14:51 2012] Updating aperture counts using extracted products
[Sat Sep  8 17:14:51 2012] Error reading totcts from fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Sep  8 17:14:51 2012] No arf file for this source, not re-computing flux
[Sat Sep  8 17:14:53 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  8 17:14:54 2012] xmm0106061401/analysis//spectral/fullrun_mos2_xmm0106061401_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete