[Sun Jun  2 12:00:18 2013] Detection parameters:
  Position = (344.0, 424.1) = 12 30 36.92 18 0 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.8 +/- 10.3
  Background counts = 10.8
  Rate = 0.008 +/- 0.002

[Sun Jun  2 12:00:19 2013] Off-axis axis estimate = 9.69'
[Sun Jun  2 12:02:46 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 12:02:46 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Sun Jun  2 12:02:46 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Sun Jun  2 12:02:46 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 11.28"
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9.csv
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9.csv
[Sun Jun  2 13:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sun Jun  2 13:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 14:18:20 2013] Spatial fit model total counts = 155.090000, observed total counts = 136.000000
[Sun Jun  2 14:18:20 2013] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jun  2 14:18:20 2013] Warning, spatial fit 9 centroid is now closest to src. 7
[Sun Jun  2 14:18:20 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 14:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 14:18:20 2013] Assessing source extent using major
[Sun Jun  2 14:18:20 2013] Source does appear to be extended
[Sun Jun  2 14:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 14:18:41 2013] Using EEF radius (= 11.28 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 14:18:41 2013] Initial guess for spatial extent in simple fitting = 11.28"
[Sun Jun  2 14:18:41 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.941
[Sun Jun  2 14:18:41 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 11.28"
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src9.ximg exists
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Jun  2 15:16:47 2013] Fit fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Jun  2 15:16:47 2013] Fit fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun Jun  2 16:16:11 2013] Spatial fit model total counts = 155.954000, observed total counts = 156.000000
[Sun Jun  2 16:16:11 2013] Offset between fit and detection position for source 9 = 0.034377 pixels
[Sun Jun  2 16:16:11 2013] 156.555400 total counts/ 117.227000 bgd. counts: snr = 3.632390
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.034377 pixels
  Position = (344.0, 424.1) = 12 30 36.93 18 0 51.8
  Extent = 6.3 (4.7-8.7)", rotation angle = 0
  Source counts = 39.3 +/- 12.5
  Background counts = 117.2
  Rate = 0.003 +/- 0.001
[Sun Jun  2 16:16:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 16:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 16:16:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 16:16:11 2013] Source does appear to be extended
[Sun Jun  2 16:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 16:16:27 2013] XMMSAS src. selection expression = ellipse(29878.110106, 36850.936800, 377.833211, 377.833211, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing source region out to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_src.reg
[Sun Jun  2 16:16:27 2013] Extracting stamp from image fullrun_pn_xmm0106061301_pi300-10000_cl_sm2.00.img.gz, (322, 402) - (366, 446)
[Sun Jun  2 16:16:27 2013] XMMSAS bgd. selection expression = annulus(29878.110106, 36850.936800, 629.722018, 1259.444036, X, Y) && !ellipse(31045.166718, 37924.265320, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9.gif
[Sun Jun  2 16:20:15 2013] Mean detx,y = (7648.20, -6255.29) 
[Sun Jun  2 16:20:17 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 16:20:31 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 16:20:31 2013] Setting source spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sun Jun  2 16:20:31 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sun Jun  2 16:37:35 2013] Not generating rmf since there are only 39 counts
[Sun Jun  2 16:37:35 2013] rmf not generated due to insufficient counts
[Sun Jun  2 17:01:20 2013] Updating aperture counts using extracted products
[Sun Jun  2 17:01:20 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 69.00
[Sun Jun  2 17:01:20 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_bgd.pi.gz = 176.00
[Sun Jun  2 17:01:20 2013] Got source and background scale factors 456000.000000, 3118176.000000
[Sun Jun  2 17:01:20 2013] User source parameters:
  Position = (344.0, 424.1) = 12 30 36.93 18 0 51.8
  Extent = 6.3 (4.7-8.7)", rotation angle = 0
  Source aperture counts = 43.3 +/- 9.4
  Background aperture counts = 25.7
  Rate = 0.004 +/- 0.0008

[Sun Jun  2 17:01:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 17:01:25 2013] Using photon index=1.80, rate=0.00332, arf fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9.arf
[Sun Jun  2 17:01:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 17:01:25 2013] Updating source flux to 1.6e-14
[Sun Jun  2 17:01:35 2013] Flag p found in src. 9 procflags, skipping spectral fitting
[Sun Jun  2 17:01:35 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 17:01:37 2013] xmm0106061301/analysis//spectral/fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete