[Sun Jun  2 12:00:18 2013] Detection parameters:
  Position = (368.2, 428.9) = 12 30 29.53 18 1 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.4 +/- 8.6
  Background counts = 11.0
  Rate = 0.006 +/- 0.001

[Sun Jun  2 12:00:19 2013] Off-axis axis estimate = 10.73'
[Sun Jun  2 12:02:46 2013] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 12:02:46 2013] Initial guess for spatial extent in simple fitting = 11.79"
[Sun Jun  2 12:02:46 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.873
[Sun Jun  2 12:02:46 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.79"
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8.csv
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8_1.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8.csv
[Sun Jun  2 13:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8.csv
[Sun Jun  2 13:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 14:18:20 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 13.374653 pixels away
[Sun Jun  2 14:18:20 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 14:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 14:18:20 2013] Assessing source extent using major
[Sun Jun  2 14:18:20 2013] Source does appear to be extended
[Sun Jun  2 14:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 14:18:41 2013] Using EEF radius (= 11.79 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 14:18:41 2013] Initial guess for spatial extent in simple fitting = 11.79"
[Sun Jun  2 14:18:41 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.873
[Sun Jun  2 14:18:41 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.79"
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src8.ximg exists
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src8_1.ximg exists
[Sun Jun  2 15:16:47 2013] Fit fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src8 appears to have run properly
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sun Jun  2 15:16:47 2013] Fit fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sun Jun  2 16:16:11 2013] Spatial fit model total counts = 170.776000, observed total counts = 169.000000
[Sun Jun  2 16:16:11 2013] Offset between fit and detection position for source 8 = 0.081007 pixels
[Sun Jun  2 16:16:11 2013] 171.522300 total counts/ 150.071000 bgd. counts: snr = 1.751077
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.081007 pixels
  Position = (368.2, 428.9) = 12 30 29.55 18 1 12.7
  Extent = 4.3 (3.0-7.3)", rotation angle = 0
  Source counts = 21.5 +/- 13.1
  Background counts = 150.1
  Rate = 0.002 +/- 0.001
[Sun Jun  2 16:16:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 16:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 16:16:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 16:16:11 2013] Source does appear to be extended
[Sun Jun  2 16:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 16:16:27 2013] XMMSAS src. selection expression = ellipse(31982.472400, 37268.980600, 258.196807, 258.196807, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing source region out to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_src.reg
[Sun Jun  2 16:16:27 2013] Extracting stamp from image fullrun_pn_xmm0106061301_pi300-10000_cl_sm2.00.img.gz, (353, 414) - (383, 444)
[Sun Jun  2 16:16:27 2013] XMMSAS bgd. selection expression = annulus(31982.472400, 37268.980600, 430.328012, 860.656025, X, Y) && !ellipse(31045.166718, 37924.265320, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8.gif
[Sun Jun  2 16:19:57 2013] Mean detx,y = (9673.19, -5598.31) 
[Sun Jun  2 16:19:59 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 16:20:10 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 16:20:10 2013] Setting source spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Jun  2 16:20:10 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Jun  2 16:37:28 2013] Not generating rmf since there are only 21 counts
[Sun Jun  2 16:37:28 2013] rmf not generated due to insufficient counts
[Sun Jun  2 17:01:19 2013] Updating aperture counts using extracted products
[Sun Jun  2 17:01:19 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 36.00
[Sun Jun  2 17:01:19 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_bgd.pi.gz = 70.00
[Sun Jun  2 17:01:20 2013] Got source and background scale factors 211200.000000, 1276800.000000
[Sun Jun  2 17:01:20 2013] User source parameters:
  Position = (368.2, 428.9) = 12 30 29.55 18 1 12.7
  Extent = 4.3 (3.0-7.3)", rotation angle = 0
  Source aperture counts = 24.4 +/- 7.1
  Background aperture counts = 11.6
  Rate = 0.002 +/- 0.0006

[Sun Jun  2 17:01:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 17:01:25 2013] Using photon index=1.80, rate=0.00181, arf fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8.arf
[Sun Jun  2 17:01:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 17:01:25 2013] Updating source flux to 1.3e-14
[Sun Jun  2 17:01:35 2013] Source 8 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun  2 17:01:37 2013] xmm0106061301/analysis//spectral/fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete