[Sun Jun 2 12:00:18 2013] Detection parameters: Position = (298.3, 286.8) = 12 30 50.86 17 50 56.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 42.6 +/- 9.5 Background counts = 11.0 Rate = 0.004 +/- 0.001 [Sun Jun 2 12:00:19 2013] Off-axis axis estimate = 0.84' [Sun Jun 2 12:02:46 2013] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 12:02:46 2013] Initial guess for spatial extent in simple fitting = 6.85" [Sun Jun 2 12:02:46 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929 [Sun Jun 2 12:02:46 2013] Giving source the simple spatial ID 23 for pass 0, mean size = 6.85" [Sun Jun 2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23.ximg exists [Sun Jun 2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23.csv [Sun Jun 2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23_1.ximg exists [Sun Jun 2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23.csv [Sun Jun 2 13:08:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists [Sun Jun 2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23.csv [Sun Jun 2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists [Sun Jun 2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23.csv [Sun Jun 2 13:08:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 14:18:20 2013] Source 23 is offset by 6.406297 and 2.921093 pixels which is larger than 2 X fitted extent = 0.893388 x 0.893388, not incorporating fit results [Sun Jun 2 14:18:20 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 14:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 14:18:20 2013] Assessing source extent using major [Sun Jun 2 14:18:20 2013] Source does appear to be extended [Sun Jun 2 14:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 14:18:41 2013] Using EEF radius (= 6.85 ")to estimate initial spatial extent for simple fitting [Sun Jun 2 14:18:41 2013] Initial guess for spatial extent in simple fitting = 6.85" [Sun Jun 2 14:18:41 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929 [Sun Jun 2 14:18:41 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 6.85" [Sun Jun 2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23.ximg exists [Sun Jun 2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23.csv [Sun Jun 2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23_1.ximg exists [Sun Jun 2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23.csv [Sun Jun 2 15:16:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23.ximg exists [Sun Jun 2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23.csv [Sun Jun 2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists [Sun Jun 2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23.csv [Sun Jun 2 15:16:47 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 2 16:16:11 2013] Source 23 is offset by 6.161400 and 2.679415 pixels which is larger than 2 X fitted extent = 0.792936 x 0.792936, not incorporating fit results [Sun Jun 2 16:16:11 2013] Vigneting correction estimate = 1.000000 [Sun Jun 2 16:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 2 16:16:11 2013] Assessing source extent using major [Sun Jun 2 16:16:11 2013] Source does appear to be extended [Sun Jun 2 16:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 2 16:16:27 2013] XMMSAS src. selection expression = ellipse(25903.091827, 24905.807068, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 2 16:16:27 2013] Writing source region out to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_src.reg [Sun Jun 2 16:16:27 2013] Extracting stamp from image fullrun_pn_xmm0106061301_pi300-10000_cl_sm2.00.img.gz, (261, 249) - (336, 324) [Sun Jun 2 16:16:27 2013] XMMSAS bgd. selection expression = annulus(25903.091827, 24905.807068, 1087.500000, 2175.000000, X, Y) && !ellipse(24786.575012, 27777.778809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26784.554600, 27406.931200, 329.629609, 329.629609, 0.000000, X, Y) && !ellipse(25670.937800, 27114.846800, 844.336024, 384.604011, 105.205100, X, Y) && !ellipse(24148.221008, 25780.973755, 870.000000, 870.000000, 0.000000, X, Y) [Sun Jun 2 16:16:27 2013] Writing fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23.gif [Sun Jun 2 16:27:11 2013] Mean detx,y = (-1555.83, 2360.65) [Sun Jun 2 16:27:14 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 2 16:27:33 2013] Binned source spectrum to 10 counts/bin [Sun Jun 2 16:27:34 2013] Setting source spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_src_b10.pi.gz [Sun Jun 2 16:27:34 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_bgd.pi.gz [Sun Jun 2 16:42:30 2013] Not generating rmf since there are only 42 counts [Sun Jun 2 16:42:30 2013] rmf not generated due to insufficient counts [Sun Jun 2 17:01:22 2013] Updating aperture counts using extracted products [Sun Jun 2 17:01:22 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 110.00 [Sun Jun 2 17:01:22 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_bgd.pi.gz = 462.00 [Sun Jun 2 17:01:22 2013] Got source and background scale factors 1245764.000000, 8814831.000000 [Sun Jun 2 17:01:22 2013] User source parameters: Position = (298.3, 286.8) = 12 30 50.86 17 50 56.2 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 44.7 +/- 11.5 Background aperture counts = 65.3 Rate = 0.004 +/- 0.001 [Sun Jun 2 17:01:22 2013] Updating counts from extracted products [Sun Jun 2 17:01:22 2013] Set source signif. to 44.71/8.08 = 5.53 [Sun Jun 2 17:01:25 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 2 17:01:25 2013] Using photon index=1.80, rate=0.00377, arf fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23.arf [Sun Jun 2 17:01:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 2 17:01:25 2013] Updating source flux to 1.2e-14 [Sun Jun 2 17:01:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 2 17:01:37 2013] xmm0106061301/analysis//spectral/fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete