[Sun Jun  2 12:00:17 2013] Detection parameters:
  Position = (441.5, 328.7) = 12 30 7.21 17 53 51.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1730.7 +/- 51.0
  Background counts = 10.4
  Rate = 0.1 +/- 0.004

[Sun Jun  2 12:00:19 2013] Off-axis axis estimate = 10.60'
[Sun Jun  2 12:02:46 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Sun Jun  2 12:02:46 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun  2 12:02:46 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Sun Jun  2 12:02:46 2013] source mask rpix=2.7, npix_max = 40, mask sum = 30, frac = 0.734
[Sun Jun  2 12:02:46 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 11.73"
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 13:08:46 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun  2 13:08:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1.csv
[Sun Jun  2 13:08:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 13:08:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun  2 13:08:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Jun  2 13:08:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 14:18:20 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.117606 pixels away
[Sun Jun  2 14:18:20 2013] Spatial fit model total counts = 269.046000, observed total counts = 262.000000
[Sun Jun  2 14:18:20 2013] Offset between fit and detection position for source 1 = 0.336430 pixels
[Sun Jun  2 14:18:20 2013] Warning, changing simple spatial fit ID from 1 to 15
[Sun Jun  2 14:18:20 2013] 273.498000 total counts/ 164.893000 bgd. counts: snr = 8.457631
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.336430 pixels
  Position = (441.3, 328.4) = 12 30 7.28 17 53 55.2
  Extent = 3.1 (2.8-3.5)", rotation angle = 0
  Source counts = 108.6 +/- 16.5
  Background counts = 164.9
  Rate = 0.009 +/- 0.001
[Sun Jun  2 14:18:20 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 14:18:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 14:18:20 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 14:18:20 2013] Source does appear to be extended
[Sun Jun  2 14:18:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 14:18:41 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun  2 14:18:41 2013] Initial guess for spatial extent in simple fitting = 3.09"
[Sun Jun  2 14:18:41 2013] source mask rpix=0.7, npix_max = 5, mask sum = 6, frac = 1.023
[Sun Jun  2 14:18:41 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 3.09"
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun  2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun  2 15:16:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1.csv
[Sun Jun  2 15:16:47 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun  2 15:16:47 2013] fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun  2 15:16:47 2013] Fit fullrun_pn_xmm0106061301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jun  2 16:16:11 2013] Spatial fit model total counts = 1302.550000, observed total counts = 1262.000000
[Sun Jun  2 16:16:11 2013] Offset between fit and detection position for source 1 = 0.448493 pixels
[Sun Jun  2 16:16:11 2013] 1295.004000 total counts/ 196.484000 bgd. counts: snr = 78.369012
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.448493 pixels
  Position = (441.1, 328.0) = 12 30 7.34 17 53 53.5
  Extent = 3.0 (2.8-3.1)", rotation angle = 0
  Source counts = 1098.5 +/- 36.0
  Background counts = 196.5
  Rate = 0.09 +/- 0.003
[Sun Jun  2 16:16:11 2013] Vigneting correction estimate = 1.000000
[Sun Jun  2 16:16:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  2 16:16:11 2013] Assessing source extent using major axis lower bound
[Sun Jun  2 16:16:11 2013] Source does appear to be extended
[Sun Jun  2 16:16:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  2 16:16:27 2013] Counts = 1098.520000, rescaling region sizes by 2.000000
[Sun Jun  2 16:16:27 2013] XMMSAS src. selection expression = ellipse(38328.441040, 28489.302000, 357.913210, 357.913210, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing source region out to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun  2 16:16:27 2013] Extracting stamp from image fullrun_pn_xmm0106061301_pi300-10000_cl_sm2.00.img.gz, (421, 307) - (462, 349)
[Sun Jun  2 16:16:27 2013] XMMSAS bgd. selection expression = annulus(38328.441040, 28489.302000, 1193.044034, 2386.088069, X, Y) && !ellipse(37228.960000, 27393.600000, 1823.384052, 1823.384052, 0.000000, X, Y)
[Sun Jun  2 16:16:27 2013] Writing fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1.gif
[Sun Jun  2 16:16:32 2013] Mean detx,y = (11081.08, 5129.25) 
[Sun Jun  2 16:16:34 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  2 16:16:47 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  2 16:16:48 2013] Setting source spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun  2 16:16:48 2013] Setting bgd. spectrum file to fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun  2 17:01:18 2013] Updating aperture counts using extracted products
[Sun Jun  2 17:01:18 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1158.00
[Sun Jun  2 17:01:18 2013] Total counts from fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_bgd.pi.gz = 384.00
[Sun Jun  2 17:01:18 2013] Got source and background scale factors 274094.000000, 8034470.000000
[Sun Jun  2 17:01:18 2013] User source parameters:
  Position = (441.1, 328.0) = 12 30 7.34 17 53 53.5
  Extent = 3.0 (2.8-3.1)", rotation angle = 0
  Source aperture counts = 1144.9 +/- 35.0
  Background aperture counts = 13.1
  Rate = 0.1 +/- 0.003

[Sun Jun  2 17:01:25 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  2 17:01:25 2013] Using photon index=1.80, rate=0.0927, arf fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1.arf
[Sun Jun  2 17:01:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  2 17:01:25 2013] Updating source flux to 6.3e-13
[Sun Jun  2 17:01:37 2013] xmm0106061301/analysis//spectral/fullrun_pn_xmm0106061301_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete