[Thu Jul 19 13:44:27 2012] Detection parameters:
  Position = (232.3, 177.2) = 12 31 10.55 16 13 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 116.1 +/- 14.2
  Background counts = 15.4
  Rate = 0.007 +/- 0.0008

[Thu Jul 19 13:44:28 2012] Off-axis axis estimate = 10.01'
[Thu Jul 19 15:20:58 2012] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 15:20:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 15:20:58 2012] Initial guess for spatial extent in simple fitting = 11.43"
[Thu Jul 19 15:20:58 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.920
[Thu Jul 19 15:20:58 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.43"
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3.ximg exists
[Thu Jul 19 15:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Jul 19 15:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3.csv
[Thu Jul 19 15:40:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Jul 19 15:40:48 2012] Fit fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Jul 19 15:40:59 2012] Spatial fit model total counts = 146.000000, observed total counts = 146.000000
[Thu Jul 19 15:40:59 2012] Offset between fit and detection position for source 4 = 0.041960 pixels
[Thu Jul 19 15:40:59 2012] 143.277200 total counts/ 65.893800 bgd. counts: snr = 9.532911
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.041960 pixels
  Position = (232.4, 177.2) = 12 31 10.54 16 13 1.0
  Extent = 4.9 (4.0-5.9)", rotation angle = 0
  Source counts = 77.4 +/- 12.0
  Background counts = 65.9
  Rate = 0.005 +/- 0.0008
[Thu Jul 19 15:40:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:40:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:40:59 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 15:40:59 2012] Source does appear to be extended
[Thu Jul 19 15:40:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 16:59:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:59:15 2012] Initial guess for spatial extent in simple fitting = 4.91"
[Thu Jul 19 16:59:15 2012] source mask rpix=1.1, npix_max = 10, mask sum = 9, frac = 0.848
[Thu Jul 19 16:59:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.91"
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3.ximg exists
[Thu Jul 19 17:18:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3.csv
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Jul 19 17:18:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3.csv
[Thu Jul 19 17:18:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Jul 19 17:18:01 2012] Fit fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Jul 19 17:18:12 2012] Warning, spatial fit 3 centroid is now closest to src. 15
[Thu Jul 19 17:18:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 17:18:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 17:18:12 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 17:18:12 2012] Source does appear to be extended
[Thu Jul 19 17:18:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:57:11 2012] XMMSAS src. selection expression = ellipse(20167.652000, 15369.179400, 294.546608, 294.546608, 0.000000, X, Y)
[Thu Jul 19 17:57:11 2012] Writing source region out to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4_src.reg
[Thu Jul 19 17:57:11 2012] Extracting stamp from image fullrun_mos2_xmm0106061201_pi300-10000_cl_sm2.00.img.gz, (215, 160) - (249, 194)
[Thu Jul 19 17:57:11 2012] XMMSAS bgd. selection expression = annulus(20167.652000, 15369.179400, 490.911014, 981.822028, X, Y) && !ellipse(21031.450256, 15817.275391, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 17:57:11 2012] Writing fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4.gif
[Thu Jul 19 17:57:32 2012] Mean detx,y = (11182.93, -8294.16) 
[Thu Jul 19 17:57:33 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 17:57:40 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 17:57:40 2012] Setting source spectrum file to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 17:57:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Jul 19 18:03:32 2012] Not generating rmf since there are only 77 counts
[Thu Jul 19 18:03:32 2012] rmf not generated due to insufficient counts
[Thu Jul 19 18:04:45 2012] Updating aperture counts using extracted products
[Thu Jul 19 18:04:45 2012] Error reading totcts from fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Jul 19 18:04:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 18:04:45 2012] Using photon index=1.80, rate=0.00494, arf fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src4.arf
[Thu Jul 19 18:04:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 18:04:45 2012] Updating source flux to 1.8e-13
[Thu Jul 19 18:04:53 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting