[Thu Jul 19 13:44:27 2012] Detection parameters:
  Position = (397.6, 234.1) = 12 30 20.62 16 17 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.3 +/- 12.0
  Background counts = 18.8
  Rate = 0.006 +/- 0.001

[Thu Jul 19 13:44:28 2012] Off-axis axis estimate = 8.57'
[Thu Jul 19 15:20:58 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 15:20:58 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Thu Jul 19 15:20:58 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Thu Jul 19 15:20:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.71"
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jul 19 15:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jul 19 15:40:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5.csv
[Thu Jul 19 15:40:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jul 19 15:40:48 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jul 19 15:40:48 2012] Fit fullrun_mos2_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu Jul 19 15:40:59 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Thu Jul 19 15:40:59 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.622613 pixels away
[Thu Jul 19 15:40:59 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:40:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:40:59 2012] Assessing source extent using major
[Thu Jul 19 15:40:59 2012] Source does appear to be extended
[Thu Jul 19 15:40:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 15:40:59 2012] Source is confused with source 11
[Thu Jul 19 16:59:15 2012] Using EEF radius (= 10.71 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:59:15 2012] Initial guess for spatial extent in simple fitting = 10.71"
[Thu Jul 19 16:59:15 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.025
[Thu Jul 19 16:59:15 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.71"
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jul 19 17:18:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5.csv
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jul 19 17:18:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5.csv
[Thu Jul 19 17:18:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jul 19 17:18:01 2012] fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jul 19 17:18:01 2012] Fit fullrun_mos2_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jul 19 17:18:12 2012] Spatial fit model total counts = 243.000000, observed total counts = 243.000000
[Thu Jul 19 17:18:12 2012] Offset between fit and detection position for source 12 = 1.470021 pixels
[Thu Jul 19 17:18:12 2012] 242.441900 total counts/ 213.809000 bgd. counts: snr = 1.958179
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 1.470021 pixels
  Position = (398.2, 235.5) = 12 30 20.46 16 17 14.4
  Extent = 8.0 (2.7-15.2)", rotation angle = 0
  Source counts = 28.6 +/- 15.6
  Background counts = 213.8
  Rate = 0.002 +/- 0.001
[Thu Jul 19 17:18:12 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 17:18:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 17:18:12 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 17:18:12 2012] Source does appear to be extended
[Thu Jul 19 17:18:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:57:11 2012] XMMSAS src. selection expression = ellipse(34593.142400, 20437.415600, 482.318414, 482.318414, 0.000000, X, Y)
[Thu Jul 19 17:57:11 2012] Writing source region out to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12_src.reg
[Thu Jul 19 17:57:11 2012] Extracting stamp from image fullrun_mos2_xmm0106061201_pi300-10000_cl_sm2.00.img.gz, (370, 208) - (426, 263)
[Thu Jul 19 17:57:11 2012] XMMSAS bgd. selection expression = annulus(34593.142400, 20437.415600, 803.864023, 1607.728046, X, Y) && !ellipse(34848.371399, 20739.034622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34622.404510, 18631.723267, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jul 19 17:57:11 2012] Writing fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12.gif
[Thu Jul 19 17:58:01 2012] Mean detx,y = (-3966.63, -10540.96) 
[Thu Jul 19 17:58:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 17:58:07 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 17:58:07 2012] Setting source spectrum file to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 19 17:58:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jul 19 18:03:42 2012] Not generating rmf since there are only 28 counts
[Thu Jul 19 18:03:42 2012] rmf not generated due to insufficient counts
[Thu Jul 19 18:04:45 2012] Updating aperture counts using extracted products
[Thu Jul 19 18:04:45 2012] Error reading totcts from fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jul 19 18:04:45 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 18:04:45 2012] Using photon index=1.80, rate=0.00183, arf fullrun_mos2_xmm0106061201_pi300-10000_pass1_cl_src12.arf
[Thu Jul 19 18:04:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 18:04:45 2012] Updating source flux to 3.2e-14
[Thu Jul 19 18:04:53 2012] Flag c found in src. 12 procflags, skipping spectral fitting
[Thu Jul 19 18:04:53 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting