[Thu Jul 19 13:44:08 2012] Detection parameters:
  Position = (308.5, 281.1) = 12 30 47.54 16 20 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.2 +/- 12.7
  Background counts = 17.5
  Rate = 0.006 +/- 0.0008

[Thu Jul 19 13:44:08 2012] Off-axis axis estimate = 1.45'
[Thu Jul 19 14:59:04 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:59:04 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Thu Jul 19 14:59:04 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.087
[Thu Jul 19 14:59:04 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.16"
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jul 19 15:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6.csv
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jul 19 15:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6.csv
[Thu Jul 19 15:20:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:20:58 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jul 19 15:20:58 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jul 19 15:20:58 2012] Fit fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Thu Jul 19 15:40:56 2012] Source 8 is offset by -6.063117 and 5.669043 pixels which is larger than
2 X fitted extent = 0.822515 x 0.822515, not incorporating fit results
[Thu Jul 19 15:40:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:40:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:40:56 2012] Assessing source extent using major
[Thu Jul 19 15:40:56 2012] Source does appear to be extended
[Thu Jul 19 15:40:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 16:43:33 2012] Using EEF radius (= 7.16 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:43:33 2012] Initial guess for spatial extent in simple fitting = 7.16"
[Thu Jul 19 16:43:33 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.087
[Thu Jul 19 16:43:33 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.16"
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6.ximg exists
[Thu Jul 19 16:59:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6.csv
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6_1.ximg exists
[Thu Jul 19 16:59:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6.csv
[Thu Jul 19 16:59:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Thu Jul 19 16:59:14 2012] Fit fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Thu Jul 19 17:18:10 2012] Source 8 is offset by -6.063117 and 5.669043 pixels which is larger than
2 X fitted extent = 0.822515 x 0.822515, not incorporating fit results
[Thu Jul 19 17:18:10 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 126.901805 pixels away
[Thu Jul 19 17:18:10 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 17:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 17:18:10 2012] Assessing source extent using major
[Thu Jul 19 17:18:10 2012] Source does appear to be extended
[Thu Jul 19 17:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:49:05 2012] XMMSAS src. selection expression = ellipse(26792.478851, 24406.236755, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jul 19 17:49:05 2012] Writing source region out to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8_src.reg
[Thu Jul 19 17:49:05 2012] Extracting stamp from image fullrun_mos1_xmm0106061201_pi300-10000_cl_sm2.00.img.gz, (271, 244) - (346, 319)
[Thu Jul 19 17:49:05 2012] XMMSAS bgd. selection expression = annulus(26792.478851, 24406.236755, 1087.500000, 2175.000000, X, Y)
[Thu Jul 19 17:49:05 2012] Writing fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8.gif
[Thu Jul 19 17:50:07 2012] Mean detx,y = (-3158.58, -1325.17) 
[Thu Jul 19 17:50:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 17:50:17 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 17:50:17 2012] Setting source spectrum file to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 19 17:50:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Thu Jul 19 17:56:14 2012] Not generating rmf since there are only 87 counts
[Thu Jul 19 17:56:14 2012] rmf not generated due to insufficient counts
[Thu Jul 19 18:04:44 2012] Updating aperture counts using extracted products
[Thu Jul 19 18:04:44 2012] Error reading totcts from fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Thu Jul 19 18:04:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 18:04:44 2012] Using photon index=1.80, rate=0.00563, arf fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src8.arf
[Thu Jul 19 18:04:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 18:04:44 2012] Updating source flux to 5.9e-14
[Thu Jul 19 18:04:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting