[Thu Jul 19 13:44:08 2012] Detection parameters:
  Position = (339.6, 351.8) = 12 30 38.16 16 25 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 680.0 +/- 32.2
  Background counts = 18.9
  Rate = 0.04 +/- 0.002

[Thu Jul 19 13:44:08 2012] Off-axis axis estimate = 4.88'
[Thu Jul 19 14:59:04 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 14:59:04 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Thu Jul 19 14:59:04 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Thu Jul 19 14:59:04 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.87"
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 19 15:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 19 15:20:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 15:20:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 15:20:57 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 15:20:57 2012] Fit fullrun_mos1_xmm0106061201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jul 19 15:40:56 2012] Spatial fit model total counts = 611.596000, observed total counts = 609.000000
[Thu Jul 19 15:40:56 2012] Offset between fit and detection position for source 1 = 0.318447 pixels
[Thu Jul 19 15:40:56 2012] 613.783000 total counts/ 177.515000 bgd. counts: snr = 32.744309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.318447 pixels
  Position = (339.3, 351.7) = 12 30 38.25 16 25 40.0
  Extent = 5.5 (5.1-6.0)", rotation angle = 0
  Source counts = 436.3 +/- 24.8
  Background counts = 177.5
  Rate = 0.03 +/- 0.002
[Thu Jul 19 15:40:56 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 15:40:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 15:40:56 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 15:40:56 2012] Source does appear to be extended
[Thu Jul 19 15:40:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 16:43:33 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jul 19 16:43:33 2012] Initial guess for spatial extent in simple fitting = 5.50"
[Thu Jul 19 16:43:33 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.964
[Thu Jul 19 16:43:33 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.50"
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 16:59:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 16:59:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 16:59:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 16:59:14 2012] fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 16:59:14 2012] Fit fullrun_mos1_xmm0106061201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 17:18:10 2012] Spatial fit model total counts = 611.591000, observed total counts = 609.000000
[Thu Jul 19 17:18:10 2012] Offset between fit and detection position for source 1 = 0.000175 pixels
[Thu Jul 19 17:18:10 2012] 613.782000 total counts/ 177.599000 bgd. counts: snr = 32.730186
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000175 pixels
  Position = (339.3, 351.7) = 12 30 38.25 16 25 40.0
  Extent = 5.5 (5.1-6.0)", rotation angle = 0
  Source counts = 436.2 +/- 24.8
  Background counts = 177.6
  Rate = 0.03 +/- 0.002
[Thu Jul 19 17:18:10 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 17:18:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 17:18:10 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 17:18:10 2012] Source does appear to be extended
[Thu Jul 19 17:18:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 17:49:05 2012] XMMSAS src. selection expression = ellipse(29467.273400, 30548.543400, 329.794209, 329.794209, 0.000000, X, Y)
[Thu Jul 19 17:49:05 2012] Writing source region out to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 19 17:49:05 2012] Extracting stamp from image fullrun_mos1_xmm0106061201_pi300-10000_cl_sm2.00.img.gz, (320, 333) - (358, 371)
[Thu Jul 19 17:49:05 2012] XMMSAS bgd. selection expression = annulus(29467.273400, 30548.543400, 549.657016, 1099.314032, X, Y)
[Thu Jul 19 17:49:05 2012] Writing fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1.gif
[Thu Jul 19 17:49:07 2012] Mean detx,y = (1003.38, 3948.59) 
[Thu Jul 19 17:49:07 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 17:49:16 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 17:49:16 2012] Setting source spectrum file to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 19 17:49:16 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jul 19 18:04:44 2012] Updating aperture counts using extracted products
[Thu Jul 19 18:04:44 2012] Error reading totcts from fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 19 18:04:44 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 18:04:44 2012] Using photon index=1.80, rate=0.0281, arf fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 19 18:04:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 18:04:44 2012] Updating source flux to 3.8e-13
[Thu Jul 19 18:04:53 2012] Reading fit data from xmm0106061201/analysis//spectral/fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jul 19 18:04:53 2012] Spectral fit parameter nH value = 1.75092e+15
[Thu Jul 19 18:04:53 2012] Spectral fit parameter PhoIndex value = 1.98375
[Thu Jul 19 18:04:53 2012] Failed to get F(0.3-8.0) from xmm0106061201/analysis//spectral/fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jul 19 18:04:53 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jul 19 18:04:53 2012] Using Nh = 1.8e+15, photon index=1.98, rate=0.0281, arf fullrun_mos1_xmm0106061201_pi300-10000_pass1_cl_src1.arf
[Thu Jul 19 18:04:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jul 19 18:04:53 2012] Updating source flux to 3.5e-13